OK guys i have finished sleeving my psu wires. And after finishing it, i am darn proud of the ffort i put into it. The power suppy is Enermax EG651P-VE. I got the 1/4" neon green sleeving and 3/8" blue heatshrink from Performance-pcs.com.
First off removing the molex connectors were pretty easy but time consuming. I was baffled when i had to remove the floppy power connector. But i played with it and finally got it to be removed. I purchased 19' of the neon green sleeve ( a tad to much) and 2' of the blue heatshrink. Took me bout 3 hours to finish the job and using a hair dryer to seal the heatshrink.
The Psu is modded with a uv reactive mod so it would glow when uv light is near.
Bookmarks