hi
i just bought 2 pairs of
ocz 4001024wv3dc-k
the chips have:
x4w560842c-50 0516k
one pair hits the wall at 225 2-2-2
the other at 230 2-2-2
3,3v its the best i can get right now on my dfi nf2
the guy who sold me the mems said that 240 2-2-2 at 3,3 v 24\7 with no problems.....
am i doing something wrong?
thnxs
Last edited by steelballzz; 07-10-2005 at 08:12 AM.
STEELBALLZZ - N3RO - MARTAKIS
ZÉ DO BENCH TEAM
add a volt or two.....
Originally Posted by steelballzz
Try them 1 at a time. I have the same prob when running 2x512 BH in my DFI nf3, 225 2-2-2 but with one stick at a time 240+ 2-2-2 @3.1v stable. It sucks I know lol from my testing with BH and the DFI I can run whatever FSB with 1 stick, ~225-230 with 2 sticks and 215 with 3.
The problem is most likely the Nforce2 chipset. I'm sure your memory will run just fine at 250MHz 2-2-2-5 on an A64 system.
AMD Athlon 64 X2 3800+ 2.8GHz 1.475V
DFI NF4 Ultra-D
eVGA 7900GTO 675MHz+50/1700MHz
2x1GB OCZ Performance 209MHz 2.5-3-2-7
OCZ Powerstream 520W SLI
Seagate 7200.10 320GB 8MB
Hitachi Deskstar 7K250 250GB
Chaintech AV710
512 sticks and NF2 chipset aren´t friend
Try 2-3-2-5
i7-2600k @ 4.8Ghz 1.38v L044A892
ASUS P8P67 LGA
16GB G.Skill Rip Jaws DDR3 1600Mhz Memory
1/2" ID Masterkleer, Swiftech MCP-655, Thermochill PA120.3 Rad, XSPC Rasa, MCW-60
Cooler Master UCP 1100 Watt PSU
GTX 680 1300/7000
Lian Li PC V-2000
Posting Permissions
Reply With Quote
Bookmarks