2x1GB/1x1GB OC Database

[Bladesinger7x]

What are you running for timings at the moment?

I posted in the TeamGroup section also ...the first picture is
the timings I was initially using, then I loaded optimized
defaults and started testing from scratch:

http://www.xtremesystems.org/forums/...d.php?t=105754

[FadY]

nothing new?

[Punisher!]

Why isn't Fady in the first place yet?

...

[Pjoeloe]

never mind

[Tallman]

Hi,
I am new to ram overclocking and this is my first ddr2 775 system.
Can you tell me if this is any good for an OC.

http://valid.x86-secret.com/show_oc?id=107177

[ahpaul82]

Anyone face this kind of weird problem before ?

Prime/SP2004GO no error for 8hours,
but once run the latest version of SisoftSandra (2007.6.10.99) will result BSOD in Memory Bandwidth test ,
but in older version no this kind of problem,

anyone can enlight me ?
thank you so much.

[Roman16]

4*1Gb:
2*Samsung Original C-UCCC (616)
Corsair TWINX2048-4000PT (0611)
250MHz 3-4-4-8 2T 2.93V

CPU-Z validation http://valid.x86-secret.com/show_oc?id=113802
A64 3000+ Winchester
DFI LP UT NF4-D
2.7V also stable

[eizei]

I just bought a kit of Team Xtreem ddr500 3-3-2-8 infineon. How much can I expect them to run @ ddr500 and or ddr550. I've seen a screenshot with cl2 @ ddr500 2,8V with these sticks but I think it's real luck. 2.5-3-2-5 would be realistic for ddr500 maybe? And how far could I push them with the stock 3-3-2-8?

[douirc]

2x1GB Crucial Ballistix Z503 - 280MHz @ 2.7V

http://valid.x86-secret.com/show_oc?id=118201

[Truckchase!]

The ballistix aren't for child's play overclockers usually dont mind dying hardware... i have 3 sets of ballistix, one from last may... still running strong @ 3.03v since then (mickeymouses set)

I mind. My 4th set just died, this time TD1s. At least they lasted a couple months longer than the older variety. The weird thing is that this time, I can't get them to fail memtest at the speed at which they are unstable. Instead, the system just reboots whenever it feels like it. (heavy load) Running my BH-5s for now until my cross-ship gets here.

Unfortunately I bought my sticks from a third party, so Crucial isn't interested in giving me a refund.

[[cTx]Philosophy]

Was wondering If Enjoy was gonna make a ddr2 post as well..

[FadY]

nothing new after holidays...???

[EnJoY]

This database is officially retired as of 9/07/06. Thanks to everyone who participated.
Be sure to check out the new DDR2 OC Database.


This in no way means conversation and results discussion can't continue in this topic. I'm just officially stating that the database will in no way be updated from here on.

[ozzimark]

not gonna dig through the last 20 pages to update it one last time?

[EnJoY]

not gonna dig through the last 20 pages to update it one last time?

If a moderator should wish too, be my guest, but frankly the effort and time it would take in relation to the benefit is not at all equal in my opinion. And that's entirely my fault for letting it go so long.

[Pjoeloe]

nest fresh test of many Rams from Anandtech

http://www.anandtech.com/memory/showdoc.aspx?i=2862&p=2

[waiho2k1]

Hi all, I'm currently using Team DDR500 2GB kit equipped with Micron 5B-F. Now I'm using it at 2.9V @ 278MHz 3-3-3-8. Is it a save voltage? And please suggest which timings should I tune to make it runs at higher frequency (now topped at 278MHz)

[douirc]

I know this is past due, but in case anyone's interested in OCZ Gold GE GXT PC4000 @ 280MHz:



Memclock (Dram Frequency)......................... 200
1T/2T Timings (Command Per Clock)............... 1T (CPC Enabled)
CAS Latency (Tcl)....................................... 3T
RAS# to CAS# delay (Trcd).......................... 4T
Min RAS# active time (Tras).......................... 8T
Row Precharge Time (Trp)............................. 3T
Row Cycle Time (Trc)................................... 11T
Row Refresh Cycle Time (Trfc)....................... 16T
Row to Row Delay (Trrd)............................... 3T
Write Recovery Time (Twr)............................ 3T
Write to Read Delay (Twtr)............................ 2T
Read to Write Delay (Trwt)............................ 3T
Refresh Period (Tref).................................... 3120
DRAM Bank Interleave................................... Enabled

DQS Skew Control........................................ Auto
DQS Skew Value.......................................... 0
DRAM Drive Strength.................................... Level 07
DRAM Data Drive Strength............................. Level 2 (Reduce 30%)
Max Async Latency...................................... 8ns
DRAM Response Time.................................... Normal
Read Preamble Time...................................... 6ns
IdleCycle Limit............................................. 128
Dynamic Counter.......................................... Disable
R/W Queue Bypass....................................... 16x
Bypass Max............................................... .. 4x
32 Byte Granularity....................................... Disable (4 Bursts)

[RafaDel]

Any one using the new Mushkin Redline PC4000 with AED93T500 chips?

[Peter Burg]

Hey guys,

i will get some Crucial Ballixtix Tracer DDR500 2x1GB memory. They have the 5B-D chips from Micron.

I've heard that there were some problems with these memories, or with some other microns. Was it 5B-G?

Can you give me some advice?