BH-5 vs UTT vs TCCD if...
where is the best if i ....try with LanParty...NF3 250Gb..
BH-5 vs UTT vs TCCD if...
where is the best if i ....try with LanParty...NF3 250Gb..
tccd I think
Because the voltage
uhh.. he can get up to 4v vdimm. if that isnt enough then damn your BH5's love voltage.
Q6700
MSI P35
8GB OCZ
2xHD 2900 XT
PCP&C 1kw
UTT with 3,1V can run 300Mhz 2-2-2-5
but can't run with div 1:1
with A64 2800+ (dfi lp nf3 250gb)
MUSIK KU KERAS
KOPI KU KENTAL
KRATON ROKOKKU
sorri if my english to bad..!!!
^ so therefore it cant run at 300mhz 2-2-2-5 with 3.1v
UTT and BH5 will do around 260mhz 2-2-2-5 with around 3.6v, TCCD is your best bet for very high memory clocks but slower timings (higher clocks make up for it tho)
AN OPEN MIND, WITH A CLOSED FIST.
not...
this my system
DFI LP NF3 250Gb
A64 2800+ S 754 @2700 300X9 Vcore 1.8v
TM SP UTT 256mb X 2 @300Mhz 2-2-2-5 (in bios 3.4v but i look in MBM just 3.1v)
all with div 6:5
MUSIK KU KERAS
KOPI KU KENTAL
KRATON ROKOKKU
sorri if my english to bad..!!!
The UTT isnt running 300mhz, its running @250.Originally Posted by endo
ooo......
my utt can run in 300 with 3-4-4-8
divider 1:1
MUSIK KU KERAS
KOPI KU KENTAL
KRATON ROKOKKU
sorri if my english to bad..!!!
So why don't You post a CPU-Z.......... ?Originally Posted by endo
Previous system:
DFI NF4 ULTRA 0453A3 KOREA CHIPSET / BIOS 510-2FIX / FX-57 0516WPMW@3.62GHZ / 2x256 CORSAIR 3200LLPT BH-5@13x278MHZ 2-2-2-5@3.69VDIMM / MACH II GT@MOD BY BERKUT / ACTIVE COOLING FOR RAM - MOSFETS - GPU RAM / CHIPSET & GPU CORE WATERCOOLED / OCZ POWERSTEAM 600W / BUILT BY ATI X850XT@660/651 - VGPU@1.73-VDD@2.26-VDDQ@2.21 PENCIL MOD / WIN XP 2x80GB SAMSUNG SPINPOINT SP80 SATA - RAID 0 & WIN 2K 40GB SAMSUNG SPINPOINT SP40 IDE BENCH DRIVE / PIC
----------------><------------------
Which memory? VX? REdline?? What voltages do you use to get to thatOriginally Posted by endo
Intel Core i7 930 @ 4ghz | Gigabyte X58A-UD5 | 6GB G.Skill Ripjaws DDR3 | Radeon 4850 | Crucial m4 128GB SSD
Intel Core i5-2400 | Asus P8H67-M EVO (Waiting to change to Z68) | 8GB G.Skill Sniper DDR3 | 8x2TB Samsung F4-HD204 | OpenIndiana | ZFS raidz2
Correct me if I am wrong, maximum voltage for BH-5 is 3.6v, is it the same for UTT?
In many cases a full 4v in boards like DFI NF4, would that kill BH-5 in no time?
If you are not using descent memory cooling, YES... 3.6v seems to me like the max 24/7.. for some benches you can use 3.7 - 3.8v of courseOriginally Posted by deltarealm
EDIT:
I have some TCCD doing 330MHz @ 2.5-4-4-8. What speeds @ 2-2-2-5 are comparebale in benchmarks to my TCCD?
Last edited by pleasure; 07-24-2005 at 02:03 AM.
AMD64 3000+ venice max PIfast 2881MHz, 41.** seconds, DFI NF4 DAGF, 2 x 256mb twinmos twister pc4000, 2 x 256mb G.skill pc4800LA , 6600 128 mb.
anybody?Originally Posted by pleasure
AMD64 3000+ venice max PIfast 2881MHz, 41.** seconds, DFI NF4 DAGF, 2 x 256mb twinmos twister pc4000, 2 x 256mb G.skill pc4800LA , 6600 128 mb.
Bookmarks