***OFFICIAL nFORCE4 Sandra Bandwidth Thread (post up!)***

[sysfailur]

For those of you that remember this thread of nforce2 bandwidth I wanted to continue the fun with an official nFORCE4 bandwidth thread!

So, if you've got some sick bandwidth using an nFORCE4 board post it up! Sandra 2005 will be used and you can post buffered or unbuffered. Just state what it is. Also if you have any mods done or cooling state what it is.

And again, I'm more than happy to kick off the thread with my best results of the past 10 hours lol. If you have tips feel free to share them btw... I know it's kinda a "competition" but if someone needs help let's be friendly

I've personally been testing my new mobo all day.. I've been up for 28 hours right now and I'm loving this board! A8N-SLI Premium, 3.0v vcore, 1.65v proc, all aircooled, chipset passive heat-piped, chipset and VT voltage upped a smidget thanks to the bios as well.

[Sucka]

Mine.

[Dumo]

Heres...

[sysfailur]

Heh looks like I have a bit of tweaking to do... Haven't had much experience with these nf4 boards yet! ;D

[Spanners]

are u running 2t because you're forced to ? because that will help bandwidth

[agenda2005]

The Sandra screen shot shows that he's running 2.5-4-4 2CMD which is obviously 2T. So ASUS has not been able to solve this 2T problem at high mem clocks even with their premium MB. That's not nice. I'm considering this board because of its rich features and stability, but if this 2T problem persist, then I may have to back out.

[funkflix]

[Viss]

San Diego VX @ 274 2-2-2-5 1T


Winchester VX @ 270 2-2-2-5 1T

[RAMMIE]

My best.
My SD 4000 and SD FX55 won't even come close.

[Spanners]

The Sandra screen shot shows that he's running 2.5-4-4 2CMD which is obviously 2T.

Yes hence why i asked if he was forced to
Great results rammie

[Major]

Shouldn't they be unbufferd for camparison sake ?

[sysfailur]

Shouldn't they be unbufferd for camparison sake ?

Some people like running it like that, some don't. That's why I said run whatever--but just state what it is.

Also on the 1T bit.. no, I tried running it and it just gave me lots of instability. I will keep my eyes out for new BIOS's though. Guess that's where I'm getting my big problems.

Oh also, I tweaked my setup slightly and was able to garner about 250mb/s more bandwidth at a test speed of 280mhz. (But no 1T). So, if I can get 1T + the other changes I made with a BIOS change I should be in good shape

[Mardok]