DFI has just sent me images and specifications of the Lanparty UT RDX200 CF-DR motherboard.
First we'll start off with an image of the motherboard itself. They have chosen to continue using the tradition Lanparty UT PCB color, along with the yellow UV slots.
As you can see, this board has a layout quite similar to the current Ultra-D and SLI-D/DR line of boards from DFI. This board incorperates the Promise SATA II 300 controller for SATA II drives.
Specifications
Below you will see a couple of snapshots directly from the PDF supplied to the media from DFI.
Next we will see the actual voltage allowments of this board...
Upon further inspection of this board, it seems that there is no jumper to run the memory directly off of the 5v line. Most likely this board runs the memory directly off of the 5v line and not the +3.3v line. Not allowing the switch should help solve some of the problems found in the DFI NF4 Ultra-D and SLI series.
Finally, we have a shot of the chipset area of this board.
Below you will see an overview of the entire board.
Overall this will be a great board for ATi Crossfire systems, we'll definitely have a full review of this board posted with full results in the near future, along with plenty of tweaks!
Bookmarks