Zalman 9500Led not stockOriginally Posted by stunned_guy
1.64 v not such few voltage
But still PShop fake BS ...CPU-Z dead
Zalman 9500Led not stock
1.64 v not such few voltage
But still PShop fake BS ...CPU-Z dead
ASUS A7N8X nForce 2, AMD Tbred @2.012 GHz, 2GB G.Skill EL Plats, Radeon 9550 Seasonic S12, Maxtor 200GB x4 WD 74 GB, Win2000/Slackware
LG GSA-4167B - LiteOn SHM-165P6S - Optiarc DVDRW AD-5170A - Sony CPD-E500 & Mitsubishi Diamond Plus 200
- - - - -
DFI LP RDX200 CF-DR Athlon 4200x2 (LDBFE) Zalman CNPS9500 AM2 2 GB G.SKILL HZ PC4000, x1650XT 24Pipe, Raptor 150GB, 1TB Hitachi DS x4, 320GB Hitachi DS x2 Corsair HX 620 in Eclipse 62 - LG GSA H42N Optiarc 7200a - NEC ND-3550A - Asus CRW-5232A
also E4500 C2D & nF4 SLI-DR 185 opty via KVM
stunned_guy is right!
an 939 X2 will never go so high with air cooling and so high voltages
FX-9370 @ 4.7 GHz @ 1,44 V | NB @ 2286 MHz @ 1,21V
32 GB 1600 CL11 1,5V @ 846 MHz @ CL 9-9-9 @ 1,4V
MORA 2 + Laing D5 + 9 x 120mm @ 5V
Gigabyte GA-970A UD3 Rev. 1.2
XFX HD7750 2GB Core Edition
Samsung 850 Pro 512GB
I'd overclocked Athlon X2 4000+ 2.1 GHz @ 3.2 GHz
Cooler - very simple!
A64 x2 4600+ 2400@3504MHz windsor it is good or normal?
Last edited by BSW_rama; 10-03-2008 at 09:11 PM.
Thats actually a very good overclock, what voltage is that at ?
assuming at 1.5V, on air? stable?
mind to post some SS?
VID=1,5625, really ~1,53V
stable??? http://images.people.overclockers.ru/166337.png
core temp on 3420 45*C, pi >55*C, full burn S&M > 60*C for my air nimi typhoon
on my cooler i can do test on very stable 3192MHz 1,375V 56*C
and 3192MHz 1,35V <50*C, BDOS on 52*C
take a look to this wonderful X2 6000+
X2 6000+ WInsor F3 | 3600 Mhz @ 1,456V primestable!
FX-9370 @ 4.7 GHz @ 1,44 V | NB @ 2286 MHz @ 1,21V
32 GB 1600 CL11 1,5V @ 846 MHz @ CL 9-9-9 @ 1,4V
MORA 2 + Laing D5 + 9 x 120mm @ 5V
Gigabyte GA-970A UD3 Rev. 1.2
XFX HD7750 2GB Core Edition
Samsung 850 Pro 512GB
Sweet OC, but I wonder what it does on air/20+ ambients. Your everest cpu temp is like 35c-40c lower than what I get with my Opty 1222 @ 1.31vtake a look to this wonderful X2 6000+
X2 6000+ WInsor F3 | 3600 Mhz @ 1,456V primestable!
No idea what that one can do fully stable, but it got through wprime 1024m + superpi 32m at 3336MHz.
You seem to get a few nice chips from time to time, shame the temps are so different, I wish I could compare them to my own CPUs.
hello, i may have a rather stupid question, but here goes.
can one compensate poor L2 cache (2x512KiB) with overclock?
as you may know, some online games like battlefield 2, crysis wars and many others just cant get enough of L2 cache when servers are packed with people. i get a HUGE fps difference when i going from 10 ppl server to 30 ppl server. like 60fps > 20fps. (whatever the graphics settings is, my hd4850 will keep the gpu usage under 60% at all times)
currently running my brisbane x2 4200+ @ 3.2GHz (11x291) 1.44v
would an opteron which is running 500mhz less on clock run faster those games, because of the 2x1MiB L2 cache. thanks a bunch for replys
Raibemunn, most likely not. Opteron's aren't exactly strong in the gaming department. Your best bet would be to hold out for PII IMHO.
I get some stuttering myself with L4D and I'm running with a 5400+ BE at 3.4GHz. I think it's my 667MHz RAM though. The CPU will peg at 100% on both cores and start stuttering, even completely stopping and then laggin at times of intense action. I know it's not the video card, because I'm running an GTX260 with a 700 MHz core speed. Just an old K8 CPU bottlenecking my setup.
So far the X2 5000+ manages perfectly at 3GHz with no voltage increasements! (1.325v / 2.6GHz stock).
Posting Permissions
Reply With Quote
Bookmarks