DDR630 G.Skill 1GB FF CL 2.5-4-3-5,

[guess2098]

just get it today G.Skill 1GB FF from digi4me







i was very happy when i get it
but.......
after tested it for a while...
can't even do 2.5-3-3-x with up to 2.9v
i thought the 5-10-3 bios is not good
changed back to 4-14-1 bios
still 2.5-3-3-x is not working good
i was so mad then start massing around and do DDR622

prime95 50mins





then...DDR630
prime95 50min







can't do DDR600 2.5-3-3-x...
poor me.....

[SIOUX]

STill nice results though. Try and crank up the volt on the ram a little, and see how far they will go. some TCCD like it......

[EclectiK]

I think I can handle that result with my GBLA. Lemme try, and I'll show you my result.

[windwithme]

DDR630 2.5 4-3-5 2.8V
so great...

[cupra]

I think I can handle that result with my GBLA. Lemme try, and I'll show you my result.

and you are right, with timing like that the le/la that much cheaper are the best choice. and after reading that thread my thought to sale my la and buy the ff are pass

[Dumo]

@guess2098...whats your specs?
With a good system specs. and 3.1V LA can go >335@2.5-4-3-6 and LE to 314@2.5-3-3-7. FF must be binned higher and tighter in beetween LA and LE, probly 325@2.5-3-3-6?

[Onepagebook]

If you have high grade TCCD like LE or FF, fo NOT ride it with high voltage like over 2.85v.
try DDR600, 2.5-3-3-6 from 2.6+0.03~2.8+0.03v

[Dumo]

Heres my LE/tccd441@314 and LA/tccd440@335...

[s7e9h3n]

Heres my LE/tccd441@314 and LA/tccd440@335...

Dumo, that LA's at 2t correct?

[Dumo]

Dumo, that LA's at 2t correct?

Its 1T..
LAs max. so far...

[XiN]

I think you can do better with FF

I can't see the screens

[guess2098]

My FF is back to digi4me.com for rma.
and pic host down i guess!!
i will post more after i get my ff back

[Transonic]

I had trouble with 510-3 also so I flashed all the way back to 310p. I spent the better part of this morning trying to get 290-300 FSB to pass memtest and I got pretty damn close with these settings while at 2.5-3-3-7 but 2.5-4-4-7 was what got me to pass:

Genie:
290-300 FSB
3x HTT
9x Multi (10x hasn't worked for me yet)
1.55v Startup
1.175-1.225
133%
1.3v LDT
1.7v NB
2.8v RAM (little or no errors compared to 2.7v in memtest, 2.9v shows no improvement)

DRAM Config:
200 1:1
2.5
4
7
4
10
14
2
2
2
2
1032 (4708 was a close 2nd best, I tried just about all of them)
1
enabled
increase skew (auto & 0 gave me a bunch of errors)
255 (tried 200, 100, 50, the lower the # the more the errors)
Level 7
Level 2
8ns (slightly more stable than 7ns)
5ns
256 cycles (everything stock from here down)
disabled
16x
7x
disabled

I'm chillin at 260x10 atm cuz it's rock solid without distortion on my screen. I'm gonna RMA my graphics card tomorrow which, according to BFG, should clear up the crap on the screen. If that doesn't work then my CPU is next. I'm also gonna try to flash my bios again back up to the 410/510's now that I got some good/stable settings to try. Hope you get stable