Venice, Stepping and Oc Database

**Dani** · 05-30-2005, 11:34 AM

Originally Posted by Dani

Ok, SP32M stable @ 2926MHz 1.64V

..and here is the screenshot, it was 2921MHz

2921MHz SP32M with Zalman 7700CU

BTW, I set 0517BDEW with Zalman, firs boot ever with that chip straight into StressPrime2004 @ 2823MHz 1.64V, 31min has gone, lets do 24h

**Absolute_0** · 05-30-2005, 12:10 PM

Dani, awesome results

where's sobol, we need an update

**Dani** · 05-31-2005, 04:53 AM

Thanks Absolute_0

0517BDEW with Zalman 2823MHz 1.64Vcore now for ~17h StressPrime2004

**NiCKE^** · 05-31-2005, 04:55 AM

So which stepping is the magic one? I've seen very good results with 0517 LBBLE cpus and the *PMW stepped ones do as before, rock!

**eva2000** · 05-31-2005, 05:04 AM

my first venice

AMD64 3200+ 512k cache (Venice)
ADA32000DAA4BP
LBBLE 0518APDW

System
3200+ 0518 APDW water cooled
DFI NF4 SLI-D 310 official
2x eVGA 6800U PCI-E SLI 76.10
120GB WD 1200JB
650W Silverstone SLI PSU

WinXP Pro SP2
NF4 6.53 remix chipset drivers

Suicide run

**sobol** · 05-31-2005, 07:38 AM

Absolute_0 im not updateing coz there isnt much to update. Im waiting for OEM to show on market or cpu from 0518 week. But there's not much info's about 0518 , as much as i seen 0518 aint good week same as 0516 wasnt ( with some exludes ). I can advice to buy if you have chance relly quick 0515 or 0517.
Greetz

**exscape** · 05-31-2005, 07:57 AM

Originally Posted by NiCKE^

So which stepping is the magic one? I've seen very good results with 0517 LBBLE cpus and the *PMW stepped ones do as before, rock!

LBBLE 0517 DPMW, 2.6GHz @ 1.4x1.04v (sensor display = 1.408v), 2.7GHz might work at 1.6v+ but I can't keep it cool enough with that much voltage. 2.7 is NOT stable at 1.55v though.

**babyelf** · 05-31-2005, 07:58 AM

try 2.7 with stock vcore.. the 0517 DPMW looks the best now at the moment

**TEDY** · 05-31-2005, 08:46 AM

my LBBLE 0517 DPMW

stable as rock

2700 at 1.4v bios (sp2004 9hours// 3dmark2001se//32mb superpi)
2800 at 1.5v bios (sp2004 9hours//3dmark 2001se//32mb superpi)

**Dani** · 05-31-2005, 08:52 AM

Originally Posted by TEDY

my LBBLE 0517 DPMW

stable as rock

2700 at 1.4v bios
2800 at 1.5v bios

How many hours Priming is "stable as rock" or did you just run SP1M

**TEDY** · 05-31-2005, 09:05 AM

almost 9 hours while i was at work

**Aoeplus** · 06-01-2005, 01:56 AM

My Venice 3000+ LBBLE 0516CPBW is not good.
pass 3d mark05,super PI 32MB,fold,game......but can't pass Prime

**Ubermann** · 06-01-2005, 02:05 AM

Thats not bad, i dont see many here that post prime over 2.7.

**eva2000** · 06-01-2005, 02:05 AM

same 3200+ 0518 APDW trying low vcore

**Millyons** · 06-01-2005, 02:57 AM

this thread should be stickied

**TodB** · 06-01-2005, 03:42 AM

GUFY, your 32M SPI result is terrible.... what's that, @100 divider for the mem? runnin 2.7GHz and a score of 40m+ is quite bad....

32M SPI means nothing for stability? yeah, right.... sure....

**TEDY** · 06-01-2005, 04:31 AM

TodB : that's correct...

i can 32mb SPI at 320*9 very easily, while prime reboots my PC...

Overall i can bench/prime/play/spi -> 315*9 at 1.55v (1.5v cpu-z) easily

**Shark-357** · 06-01-2005, 04:32 AM

Gufy said that super pi 32mb pass means nothing for stability .....which is true

edit:LOL!! Tedy 1 sec

**Dani** · 06-01-2005, 05:16 AM

0517BPDW Venice 3200+
- StressPrime2004 stable for 21h 2853MHz 1.64V Zalman 7700CU

After 24h I test 2.9GHz 1.64V

**cool_dude** · 06-01-2005, 06:32 AM

Hi all,

I need some help....

Ive got a Asus A8N Sli - Non Delux

Today i had shipped to me a lovley new 3000 venice, along with a A64 Freezer

The stepping is; LBBLE 0517 APQW

I understand that one user on here acheived 2.8/2.9ghz with this chip, however it was watercooled. I ran the same vcore as the guy (1.45vcore) and started to clock, went from 200 to 240, in 20 fsb increments. I reached 250 and ran super pi (aswell as @ 220 and 240) Super Pi came up with an error 'not exact in round' So im assuming it meant it wasnt stable.

Details;
Ram @ 2.85v, loose timings (3-4-4-8) Ram is OCZ 1GB 4400 Perfomance Series
cpu @ 1.45v
HT @ 3
Divider - 1:1

I need some help from the xperts

Cheers

Gangstar

**[XC] 4X4N** · 06-01-2005, 07:03 AM

Run your ram on the 150 or 133 divider to rule out the ram. Then if still not able to pass super-pi up the vcore.

**Super Nade** · 06-01-2005, 07:19 AM

Some preliminary results:

3200 LBBLE 0516DPHW

Burning in ATM at 2.7 GHz, 1.675V using CPU Burn-in, error checking turned off. Surprisingly, temps just about hit 42 C. This is a bit off isn't it? With my 3500 NC, I would see temps of upto 52 C, 1.65 VCore. Surely something is wrong.

I will drop the VCore later tonight. Also, I could get to 2.55 at 1.4V (stock) and 2.65 (1.625V). All of these are Super Pi 32M stable. RAM was manually set to about 185MHz (2.5-4-4-10).

**cool_dude** · 06-01-2005, 07:34 AM

After snooping around these forums, hehe.. noticed there is a 1T issue, put the memory to 2T and currently at 290FSB * 9 = 2.6ghz

@ 1.45Vcore. Super Pi 1Mb Stable, will do 32mb later on.

**deeznuts** · 06-01-2005, 08:17 AM

Hmm, wondering if someone can help. I got a 0517DPJW 3000+, and Epox EP-9NDA3J. I turned down the multiplier to 5x, and ram to 100. My HTT/FSB goes all the way up to 355 no problem. When I put the multi back up to 9x, I can only turn up the FSB to 280, for an oc of 2520. This is regardless of vcore, stock or +2.0v. If I even go to 285, bios, cpuid, everything reads as 9x200 = 1800. At that point anything higher, even 300fsb, says 9x200.

Voltages and temps are ok I guess. Is 2520 the max of my chip? I think it's a mobo issue right, that's why it's resetting itself to 1800mhz when i push it past 280 fsb. Oh yeah, the 2520mhz is fully stable after over 12 hours of prime95. Any ideas would be greatly appreciated!

**babyelf** · 06-01-2005, 08:19 AM

tried a bios change?

Thread: Venice, Stepping and Oc Database

Thread Tools

Search Thread

Rate This Thread

Display

Bookmarks

Bookmarks

Posting Permissions