Hahah man you killing me I'm trying to get my stable at 2,8ghz now Will work my way up there even if it takes me a month
Hahah man you killing me I'm trying to get my stable at 2,8ghz now Will work my way up there even if it takes me a month
Intel FTW!
Beanna
On a Hyper6 (I'm sure I've posted these pics beforem but maybe not in this thread )
Damn that's nice!
Now I'll talk to OPB and ask for you adress and then you will wake up tomorrow without your Venice I might take the heatsink aslo hehe.
Intel FTW!
Beanna
Hell, if you can make it halfway around the world in less than one day's notice just to take a cpu, you would have definately earned inOriginally Posted by NiCKE^
NiCKE^ what is your cooling and stable oc for now ?
I have same apqw 0484 with stock hs and cant stabilize it 9x300 @ 1.5v-1.65v
It's like a wall...Am I missing something ?? running dfi ultraD 414-1
thanks
0484 is the batch number? 9x300 @ 1.45 24/7 SLK948U+Vantec Tornado @ 5v.
Intel FTW!
Beanna
yes
Well I dont think it's a T° issue regarding my bad results but I'm waiting for a xp90c.
My 3200 0517BPEW doesn't oc well too !
I'm so lucky...
Gotta be some explaination about it. But if you uses the stock HSF you might should wait before clocking
Intel FTW!
Beanna
I hope
maybe my 20 pins 350w enermax
Can be the reason why. If you don't get it to work just add me on icq or msn and I will try to help out.
Intel FTW!
Beanna
Thanks
I added you in my msn contacts
Last edited by Vroom; 06-07-2005 at 11:51 AM.
Just changed BIOS for 310
French Overclockers roxxxxxx
OCM Team addict
you guys just doing superpi....which means nada.....
try S&M 100% load and long .....or prime small with 3dmark2001 all in once
ASUS P5K-E // E8400 Q746A519
G.Skill F2-8000CL5D-4GBPQ
LC 550W GP// XPERTVISION 9600GT
Looking damn good Overcrash!
Vroom I didn't get any message about it, are sure you added?
Intel FTW!
Beanna
Originally Posted by TEDY
if u can play games stably or do anything else perfectly fine, forget prime
Nada is all relative And yeah, staring at a computer for 24 hours watching prime 95 run isn't exactly what I'd consider exciting....Originally Posted by TEDY
Absolutely. So many other things you can do in the meantime.
Looks like my 3000+ 0517BPEW is getting better and better.
Had it running CPU Burn-in last night at 2700, 1.488V.
Has been running Prime for 5 1/2 hours now at 2755Mhz, 1.488V.
Leaving CPU Burn-in run all night now at the same speed.
2.8Ghz should be possible, more would be even better.
Rig #1
Gigabyte P67A-UD4 trying to figure out this POS board
2600k @ ?????
2x2Gb GSkill RipJaws-X 1333 (7-7-7-21)
ATI 5850
Coba Nitrox 750W
Watercooled with HK 3.0 CU, Watercool GPU-X³ 5870 Nickel, PA120.3, Laing Ultra with XSPC top
Rig #2
DFI UT P35-T2R (0317 bios)
E8200 @ 4000 (1.216V) / 4100 (1.248V) / 4200 (1.296V) / 4300 (1.344V)
2x2Gb Chaintech Apogee GT PC2-8500
Powercolor 4870
Corsair 520HX
Watercooled with HK 3.0 CU, EK-FC4870, Feser tripple, Laing Ultra pump
It's funny to have Vapo's front+rear fans at 100% and sleep in same room to get 24h shot of Prime
- Team Skootterit
- SuperPi32M : 18m53.156s with FX-57 / LN2 (Ilkkahy's brazed container)
- SuperPi8M : 3m55.703s with FX-57 / LN2 (Ilkkahy's brazed container)
- SuperPi1M : 21.484s with FX-57 / LN2 (Ilkkahy's brazed container)
Not funny, more like windyOriginally Posted by Dani
3Ghz in water just with 310 BIOS i'm verry happy
now testing prime
French Overclockers roxxxxxx
OCM Team addict
Originally Posted by overcrash86
I got my 3200+ SP8M stable 3103MHz 1.5V
- Team Skootterit
- SuperPi32M : 18m53.156s with FX-57 / LN2 (Ilkkahy's brazed container)
- SuperPi8M : 3m55.703s with FX-57 / LN2 (Ilkkahy's brazed container)
- SuperPi1M : 21.484s with FX-57 / LN2 (Ilkkahy's brazed container)
good with phase change ?Originally Posted by Dani
i'vent seen any other 3Ghz watercooled was i first
Last edited by overcrash86; 06-07-2005 at 02:42 PM.
French Overclockers roxxxxxx
OCM Team addict
Yes with Vapo, I think 3110MHz is the last stable SP8M with 1.5V
Ouh, got to sleep now..
BTW, dont know about WC WR
I use only ZM7700CU, Vapo and CO2
- Team Skootterit
- SuperPi32M : 18m53.156s with FX-57 / LN2 (Ilkkahy's brazed container)
- SuperPi8M : 3m55.703s with FX-57 / LN2 (Ilkkahy's brazed container)
- SuperPi1M : 21.484s with FX-57 / LN2 (Ilkkahy's brazed container)
Bookmarks