cpu V max 1.75
cpu V max 1.75
Get ocing already DFI may finally have some competition.
AMD Phenom II 720 @ 3.8ghz
DFI Lanparty DK 790FXB-M2RS
2x2GB Corsair XMS2 PC8500
Gainward HD4870 1GB @ 860/1130
Thermaltake TP 750w
Custom Water
lowdog, can you please backup and upload the BIOS file ?
AN8-SLI Fatal1ty VoltageOriginally Posted by bob(nz)
VCore:
Winchester & Venice & San Diego : 1.400V - 1.750V ( 0.025V increasement)
Clawhammer & Newcastle : : 1.500V - 1.850V ( 0.025V increasement)
DDR Voltage(VDimm)
2.50V - 3.55V ( 0.05V Increasement)
DDR VTT
1.25V - 1.75V & DDR/2 (0.05V increasement)
Chipset Voltage
1.50V - 1.80V (0.05V increasement)
Hypertransport Voltage
1.20V - 1.35V (0.05V increasement)
CPU Refrence Voltage : CPU Reference Voltage during system init
+0.01v to +0.10V (+0.01V increasement)
DDR Refrence Voltage : DDR Reference Voltage during system init
+0.01v to +0.10V (+0.01V increasement)
I might invest in getting one of these boards, I've always liked Abit. It might be a cure to this cold bug problem. :O
AMD San Diego 3700+
NF4 DFI Ultra-D
OCZ VX 4000
OCZ 600W PowerStream
Astek WaterChill Dual-Rad
any pics or benchies yet
Abit KN9-SLI
X2 3800+
1gb corsair pc5400
2 evga 7900gt
200gb maxtor sata
ocz 520w
heatware:althes
ebay althes
Tictac, are you in any way affiliated with Abit?
Or just looking forward to get your hands on the board?
Get the 13 bios here:Originally Posted by ReelMonza
ftp://ftp-tw.abit.com.tw/pub/downloa.../an8/an813.exe
Is it the same for Fatal1ty AN8-SLI ?
It is the bios for the Fatality AN8-SLI.Originally Posted by ReelMonza
Nope... not affiliated to any companyOriginally Posted by stryg
Depends on performance , pricing & stability...
whats holding you lowdog
find out the max htt =]
there is weird memory divider option in the bios
DDR200
DDR266
DDR333
DDR366
DDR400 : should be 1:1
DDR433
DDR466
DDR500
HTT @ 200MHz
setting DDR clock divider to DDR500 ...
cpuz will show it is running at 130MHz speed
but sandra give 6100mb/sec unbuf score
setting DDR clock divider to DDR400 will give lower sandra score
so is it possible to run memory clock higher than htt clock on a64 rig...
wonder why that is
Abit KN9-SLI
X2 3800+
1gb corsair pc5400
2 evga 7900gt
200gb maxtor sata
ocz 520w
heatware:althes
ebay althes
Does any one know of any review of this board?
he said that he is new to AMD overclocking stuff ...Originally Posted by calcal
EDITED: There seem to be a VDIMM voltage isssue on this board :-/
Check it here if you can read german
http://www.forumdeluxx.de/forum/show...32#post1913132
Last edited by tictac; 05-24-2005 at 12:06 AM.
Originally Posted by tictac
Whats so funny, we all have to start at the begining.
What's it say???????Originally Posted by tictac
Can someone translate?
As far as I understood with my long-not-used German, it seems they're having problems with the bios being incomplete or buggy written - as soon as they up HTT/FSB and simultaneously Vdimm in bios, the system completely locks up.Originally Posted by tictac
Tictac, it seems now it's your chance, right?
away & gone
if we up the vdimm, save exit and then go back into the bios and up the HTT/FSB it should be ok right?
Asus Rampage Formula X48
Intel Q9650 @ 4.33GHZ
OCZ Platinum DDR2-800
Palit 4870x2
Creative Xi-Fi Extreme Music
Corsair HX1000
LL 343B Case
Thermochill 120.3
2xMCP355
KL 350AT
KL 4870X2 FC WB
DD Chipset Block
lowdog... why dont you post your temporary result here... 265Mhz x 9 ....
have you got it any higher than that?
mrlobber... i used google to translate thier language... my bad
situman... i have no idea .... looks like uguru bios issue to me... all three of them having problem with their an8 fatal1ty sli board.... :-/
anyway that an8 sli fatal1ty bios kinda outdated... :-/
NVMM version 4.73
PCI booting agent 202.467
NVRAID version 4.81
DFI NF4 already running on newer module...
NVMM version 4.94
PCI booting agent 212.0487
NVRAID version 4.84
I'd be not so sure about it. According to the thread tictac linked to, the guys are having all kinds of problems - random BSOD's, reboots etc. One said, he was able to run his FX-55 on a DFI up to 3.2Ghz, but was not able to post on the Abit at all. He tried also a Venice and that lost tons of mhz on the Abit bord as well.Originally Posted by situman
Yet as far as I understood all those problems might be buggy bios related. Or might be not
away & gone
The AN8 Fatal1ty is already OVERPRICED at $185USD, if the SLI model is $235USD, why choose Abit over DFI???
If anything, the Abit should be cheaper than the DFI.
C
So far, the Abit seems to be very buggy. A bit disappointing really since the Abit has so much more development time than the DFI. I guess this is what happens when the finances are going down the drain and they had to let people go.
Asus Rampage Formula X48
Intel Q9650 @ 4.33GHZ
OCZ Platinum DDR2-800
Palit 4870x2
Creative Xi-Fi Extreme Music
Corsair HX1000
LL 343B Case
Thermochill 120.3
2xMCP355
KL 350AT
KL 4870X2 FC WB
DD Chipset Block
DFI did a strategy step.....We - most of as if not all - knew DFI as a cheepy company with low end mobos - at least here in Hellas - .....Nowadays and after the incoming of THE engineer into DFI, I wonder IF there are ppl out there that they don't know them....It has become on of the most competitive company out there.....
ABIT on the other hand, have lost THE engineer and now they are trying to find out what to do!.......I do not want to talk about ASUS though coz they got THE name and the reputation and they still are inside the game......And you know what?......They are in the game since the old days and they still keep on......
I think that ABIT is losing a bit the game nowadays.......BUT from time to time, they always come up with something good....They are not losers...They are fighters.....
All of the mobos are some kind of buggy.....Wins the less buggier one....
INTEL PWA FOR EVER
Dr. Who my arss...
.........
Bookmarks