Originally Posted by bachus_anonym
thanks
but I think it link to the wrong screenie, it shows 250, not 266
Originally Posted by bachus_anonym
thanks
but I think it link to the wrong screenie, it shows 250, not 266
Core i7 920 D0 3844A717 4.40Ghz HT on @1.36v (LinX/Prime/3D stable), Corsair 850W, 12GB OCZ Platinum 1600, P6T Deluxe V2, EVGA GTX 285 SS, OCZ Vortex SSD 30GB x3 RAID0, HAF 932.
Water Cooling Setup: XSPC RX360, MCP355 + XSPC Res Top, Swiftech GTZ, 1/2" Tygon, Scythe S-Flex SFF21F push, 20mm yateloon D12SL-12C pull.
Opteron 148 CABNE 0528 GPMW 3.1Ghz @1.6v Prime Stable. Westy 37" LVM-37W3, DFI Venus 975, 2GB TeamX Cronus Micron, GSkill HZ, Sapphire X1900XTX, Zippy 700W, X-Fi Xtrememusic, 36GB Raptors x2 @Raid-0.
WC Setup: PA120.3 +Shroud, MCP655, STORM, MCW60, 1/2" Tygon, mini res, Yate Loon.
This is OCZ VX3200 at 270x10, 2-2-2-6 @ 3.5 VDIMM. Completed SuperPI 32M at default VLDT and VCHIP! I picked up this 2x512 from Newegg for around $161 I believe. The sticks seem a tad slower than my XMS3500 at 267x10 though.
Board: DFI-Ultra-D
BIOS: 510-2
DIMM slots: #1/#3 orange
CPU: 3700+ San Diego
This is OCZ VX4000 at 261x11, but needs only 3.3 VDIMM. Doesn't go much higher. I have run the sticks at 260 @ 3.2 VDIMM, Memtest clean and 3D stable, but did not try a 32M run there.
abit an8 sli
mushkin pc 3500(heatspreaders intact)(bh-5)
3.5vddr 1.75 vtt
3500 clawhammer
http://members.cox.net/italygirl25/3500@268mhz.bmp
heatware chew*
I've got no strings to hold me down.
To make me fret, or make me frown.
I had strings but now I'm free.
There are no strings on me
DFI LanParty SLI-D
3.4v DIMM
http://members.chello.pl/xt/BH6.JPG
/- maniac's hardware list | contact: maniac@tweak.pl
|- Tweak.pl Low Voltage, Silent & High Performance Team
|- Venice max: [2.9 GHz Prime 15h Stable]
|- 2x512MB Old Kingston KVR Winbond BH-6 [255 MHz 3.4v SuperPi 32M Stable]
|- BH-6 Timings: E-1.5-5-2-7-12-2-2-1-1-4708-1-E-DS-0-L7-L2-08.0-06.0-16-E-16-7-D
\- 3DMark 2000 SE Score -> [Click to ORB] <- 30933 pk
I have BH-6....Vdimm is 3,7 without any cooling
EDIT: I have read first post and i have changed this screenshot....now its 32M
Last edited by kostek13; 06-29-2005 at 03:36 AM.
All valid screnies have been added!
@kostek13
First of all, you have not provided any info as to what mobo and RAM are you using... Second, raise your screen resolution so you can fit 2 instances of CPU-Z (CPU and Memory tabs)...
Best I can get out of this 3200 Gold BH, 262Mhz 3.6v. Using 0704-2(Bigtoe mod).
MB Reviewer for HWC
Team OCX Bench Team
This is on the 7 series BIOS. I switched to the 310P after and could do it with 3.3v. (see new 270mhz below)
Also just got 270mhz stable. 3.6vdimm
Last edited by musk; 07-26-2005 at 09:18 PM.
275.4mhz 3.6V
2x256MB BH-6 Infineon&Twinmos
DFI NF4 Ultra-D
Venice 3000+
Last edited by Tomwer; 07-21-2005 at 06:01 AM.
OCZ 3200VX, 3.55V
dfi nf3 ultra-d, 602 bios
3700+ san diego
TMSP PC3500 BH-UTT coupled with 3000+ Venice and DFI Ultra-D.
No real burn-in yet, this is 252MHz at 3.4v.
No rig right now.
Good work broOriginally Posted by szukalski
With a bit of burnin and some timing tweaks 260 should be possible... get into it! hehe
VX/UTT Voltage Scaling, please contribute...
10x260 _ 1T-2-2-2-8-7-15 _ 3.3vDIMM _ 1.75vCORE
Mobile 3400+ CG 0437XDPW
DFI LanParty UT
XP120 w/ 120mm Thermaltake Thunderblade
2x512MB OCZ VX
BBATI 9800np w/Infineon
PC Power & Cooling 510w Deluxe
4x512 Twinmos SP BH-UTT 2-2-2-5-7-12-2T 245mhz@3.4v
DFI NF4 Ultra-D 0623-2
No rig right now.
I´m happy to see this thread as a sticky, it deserves it.
Thanks for the work bachus_anonym!
I second that. The Winbond and TCCD NF3/NF4 threads have been great resources for my learning curve.Originally Posted by KoNiaK
Big ups to Bachus!
No rig right now.
2*256 ADATA BH5 313we 2/2/2/5/7/12/2/2/12 at 3.8v at the moment
DFI NF4 ultra D (bios 310p)
Venice 3000+
4*256 ADATA BH5 313we soon test (giga k8n sli / Epox 9npa+ / DFI nf4 Ultra / venice 3000/ sd 3700+)
After a while, thread has been updated Thank guys :thumbsup:
I stuck this thread, together with TCCD one and Enjoy's list of 2x1GB OCs. I hope you will guys enjoy them
Here's some OCZ VX at 3.4v
DFI SLI-DR | Opteron 170 Mach II | 2x512 G.Skill LE | x1900XTX | 2x250GB Hitachi T7K250 RAID 0 | PCP&C 510 SLI | Creative X-Fi
My Heatware
Thanks bachusOriginally Posted by bachus_anonym
MB Reviewer for HWC
Team OCX Bench Team
3000+ 0517 VENICE
GSkill 1GBGH
DFI Ultra-D
My Super pi 32m
DDR540 2 2-2-5 3.5V
Test rig:
AMD 3200+ Venice 0517 (very poor @ O/C)
2x512MB G.Skill GH
DFI SLI-DR
262 MHz, 2-2-2-5, 1T @ 3.5V (3.6V for stable Memtest86)
>>>Screen<<<
Last edited by patryko; 08-19-2005 at 01:53 PM.
AMD 64 3200+ / DFI NF4 SLI-DR / 4 x 512MB BH5 / Leadtek GeForce 6800 GT / Seagate 7200.7 80GB / Seagate 7200.7 120GB SATA NCQ / Audigy 2 ZS / DVD-/+RW LG GSA-4163B / EIZO 768K
Result for entry
BIOS 623-2 / Yellow
331x9 : DDR540
Others for Interest
270x9 : DDR540
375x8 : DDR545
CPUz Validation
VapoChill LS [AC] / QX9650 / X6800 / E8500 / Q6600 / CF-3870x2 / 8800 GTS G92 512 / XFX 7950GX2 (H20) / GeIL PC2-8500 C5 / PC2-6400 C4 / SilverStone OP1000 / ST75ZF
Abit IP35-Pro | 3DM06 - 18,264 | PCM05 - 23,577 | PCMVA 13,063
DFI 680i LT | 3DM06 - 24,602
Abit X38 QuadGT | 3DM03 - 120,337 | 3DM06 - 28,176
** michael, my little suggestion:
you should check the multi. You know what I am saying.
4x512mb..
************************************************** *******
2x512mb; 32m passed , currently hold the 6th place
Last edited by Onepagebook; 08-21-2005 at 10:37 PM.
Bookmarks