NF3/NF4 & BH-5/BH-6/UTT - Highest stable clocks - REPORT IN !!!

[uwackme]

Hi BA... nope the sticks are 4 512M AA4T UTT-CH based. Plain old TMII from back in March. They were the 4 best sticks out of 8 TMII sticks I sorted. Sticks 5/6 are sitting 230Mhz 1T in NF7-S and 7/8 are sitting 220Mhz 2T in another NF7-S.

My 4 sticks of Twinmos SP 3200 ...AA4T also havent fair as well, 2 of the sticks suffer HIGH voltage issues and coldboot issues in NF4.

I have 2 sticks of the new BH in there now, not doing so great. 250Mhz but if 1T is used memtest 1.55.1 test#8 fails regardless. Im sure its probably a setting somewhere, but Ive tried everything in the bios so far. They dont run beyond 210Mhz in NF2 systems.

The nice thing about the UTT-CH chips was the fallback for not "great" sticks, they'd at least do better in NF2 systems then even most GOOD BH5 sticks, so the 4 of 8 that didnt pass muster found good homes that were still a heck of an improvement.

[LoKi2k]

@uwackme

IIRC, for that SPi 32M run *4x512MB of TwinMOS TMSP PC3200 UTT-BH5 (1A4T)* were used. Am I right?

@LoKi2k

Looking good there, but we need SuperPi 32M...

@ZderinS

Grats for the best mem clocks. Superb

i will post the screen, when i am @ home. i tought u will only see, that it is stable

[ben805]

Mushkin Redline XP4000......270 @2-2-2-6 1T

[eczanet]

TANSEL FROM TURKEY
MUSHKIN REDLINE 2x512MB

[funkflix]

2 x 512MB Mushkin PC3500 Lvl. II 1.5-2-2-5-7-16 1T 254.6MHz 3,34V



270MHz should work too, maybe i try it today.

[bachus_anonym]

@eczanet,

Honestly, I should not be adding this entry. You need to have 2 CPU-Z windows on one screen, preferably 1.28 and up with "CPU tab" and "Memory Tab open. Also it would be great if you showed us A64Tweaker window.

[teko]

Att. Bachus Anonym, I know it might be a bit difficult, but it would be a nice info, if you also wrote how much volt they are getting.. Would be a bit easier to see if the one's one might have could do as well as those on your list

[funkflix]

Att. Bachus Anonym, I know it might be a bit difficult, but it would be a nice info, if you also wrote how much volt they are getting.. Would be a bit easier to see if the one's one might have could do as well as those on your list

Jep, thought the same! Maybe u can add it.

[ianocean]

@bachus_anonym can you update my score with GEIL Ultra X at CAS1.5
Thank you!

[eczanet]

i never lie its true this ram modules is flying on ground..
its my best ... surely at the moment...
i guess these ram modules gain more mhz as time goes..

[gecko79]

verry nice.. eczanet I'am from Turkey.. my score is down but only 1M

[Mardok]

If only 1M then...

[uwackme]

Im really bummed, I have new OCZ ValueVX BH based sticks, and they wont even do stock 8,4,4,2.5 @ 3.0Vdimm 200Mhz with 1T in this board. This is the same board that does 260Mhz 8,2,2,2.0 1T with 2x512M UTT-CH and 250Mhz 4x512M UTT-CH 2T.

I got two sets, but one is dead, so I cant test 4x512M yet. I suppose if 4x512M still does 250 @ 2T Ill live. The good set does do 260Mhz 2T but anything over 180Mhz it fails test#8 in memtest 1.55 with 1T.

This makes for a 300MB/s loss in bandwidth in memtest, dropping to 2T....over 10%.

WHERE can we still get UTT-CH based ram? Rumor has it even 3200/4000 VX is now been BH-ified.

All I want is a second set of 4 512M UTT-CH sticks so I can match my brother's system with my own....ugh.

[NiCKE^]

uwackme, I can sell mine to you but you will have to give me a pair of GSkill PC4400 LE as exchange

[uwackme]

Im going to give OCZ a shot, RMAing the bad set, if 4x512M work fine 250Mhz @2T then Il live with it. OTherwise, Ill sell off this BH.

[tansel]

ıt's my MUSHKIN REDLINE 2x512MB @3.8v

[uwackme]

I slapped the "orking" set of ValueVX around, here is the result:

[Clevor]

[QUOTE=bachus_anonym]All entries have been updated. Thank you!

@Clevor,

As much as I would like to add your result to the list, I can't. I need to see SuperPi, CPU-Z and A64Tweaker on one screen. Not just cropped seperate windows. I'm sorry If you could re-run it, then it's awesome /QUOTE]

I'm new to screenies so didn't know you are supposed to open everything on one screen (duh).

I got the sticks back in and reran it. Even gained a few seconds over last time . Again, 2x512 XMS3500 at 267x10 @ 3.63 VDIMM - would you believe the worse pair of seven sticks I have!

[computersmsa]

Hi,

Here : Computersmsa Memory (CMSAM) UTT BH-5 0522 @ 3.6V



This erreur is a mistake, rock stable for me

[Ozan Baseski]

Hello friends
This is my first message and I'm happy to join you. Last night I tried with my new memory Mushkin Redline 4000 and got 265mhz 32m stable system.

[ben805]

Hi,

Here : Computersmsa Memory (CMSAM) UTT BH-5 0522 @ 3.6V

This erreur is a mistake, rock stable for me

geewiz....look at that bandwidth!! very nice score at <2.4Ghz....what cpu was that? claw?

[computersmsa]

A Venice 3000+
Nice bandwidth because I setting very good timings, no bad timing for show high frequency

tRC = 10 | tRFC = 15 | tRRD = 2 | tWR = 2 | tWTR = 1 | tRWT = 2 | tREF = 3072 | tWCL = 1
DRAM Bank Interleave = Enable | DQS skew Control = Increase Skew | DQS Skew Value = 128
DRAM Drive Strength = Level 1 | DRAM Data Drive Strenght = Level 1 | Max Asynce lantency = 7.0ns
Read Preamble time = 5.0ns | Idle Cycle Limit = 256 | Dynamic Counter = Disable | R/W Queue Bypass = 16x
Auto Bypass Max = 7x | 32 byte Granulation = Disable (8burst)

You can buy some here : http://www.xtremesystems.org/forums/...ad.php?t=65073

[bachus_anonym]

ALL screenies with SPi 32M since last update, has been added to the list.

I also included two 4x512MB runs by Dumo and ben805.

Keep them coming guys! This list is growing REALLY BIG

@Ozan Baseski

to XS and thanx a lot for a screenie! Great 1st post

@computersmsa

Anu chance of a SPi32M for us? Would be awesome to see your own brand here

[ben805]

Michal...please update again, 2GB @250 is history, just ran a 2GB @266 with only 3.5v.....sorry....hehehe

[bachus_anonym]

Already did it

Sweet bro! Great clocking