And about ZALMAN ZM-NB47J?
I MUST change chipset cooler ... with DFI stock cooler at 300x8 I reach 53°-54°
And about ZALMAN ZM-NB47J?
I MUST change chipset cooler ... with DFI stock cooler at 300x8 I reach 53°-54°
Enermax Noisetaker 470W
Opteron 165 @ 2700 mhz 1.375v CCBBE 0616XPMW | XP-120 w/ Akasa 120mm
DFI LanParty NF4 Ultra-D | Bios NF4LDB14
1GB G.Skill 4400LE
Club 3D X800XL@460/1100 | Silencer 5 rev. 2
DDR630@7-4-4-2.5-1T SuperPi 32M stable
I have an ASUS AX800XL and the DFI Ultra-D mobo and the clearance between the chipset and the card is basically 0! The card is touching the chipset fan and sometimes it'll make those weird noises, like when you put your finger in a spinning fan. If the card isn't mounted correctly you could complete stop the chipset fan. So those out there that may be hearing that weird noise or notice you have high chipset temperatures, check to see how close your videocard is to the chipset fan because the fan could be stuck on the card. I really hope I don't have to do any modding to this thing so everything works nice.Originally Posted by dnottis
It's possible to put pci-e card in the second pci-e slot so they don't touch ... I have moved mine X800XL and I have set jumpers to SLI mode so second pci-e works @ 8x without differences in performanceOriginally Posted by Techwarrior
Enermax Noisetaker 470W
Opteron 165 @ 2700 mhz 1.375v CCBBE 0616XPMW | XP-120 w/ Akasa 120mm
DFI LanParty NF4 Ultra-D | Bios NF4LDB14
1GB G.Skill 4400LE
Club 3D X800XL@460/1100 | Silencer 5 rev. 2
DDR630@7-4-4-2.5-1T SuperPi 32M stable
Awesome! I didn't know that! Do you have to move the jumpers to SLI mode for it to work @ 8x?Originally Posted by XiN
Exactly. In SLI mode both slots works @ 8x and the difference in perfomance between 8x and 16x is about 1%-2%Originally Posted by Techwarrior
Without moving jumpers, instead, second slot works at 4x (or 2x I don't remember ...)
Enermax Noisetaker 470W
Opteron 165 @ 2700 mhz 1.375v CCBBE 0616XPMW | XP-120 w/ Akasa 120mm
DFI LanParty NF4 Ultra-D | Bios NF4LDB14
1GB G.Skill 4400LE
Club 3D X800XL@460/1100 | Silencer 5 rev. 2
DDR630@7-4-4-2.5-1T SuperPi 32M stable
But that will also not make a performance differnce try it out and you will see..they really dont NEED that much bandwidth...
Dragon
http://smbach.com/mad.gif
Opty 175 Rig
Lian-Li PC75B case, Thermaltake BT w/ 165 CFM delta fan, Enermax 550watt PSU (36A on 12+), x1950 Pro, DFI Lanparty NForce 4 Ultra-d (moded for SLI so that i can use the second slot at 8x), Opteron 175 CCBWE 0547 TMPW (2.80, 280x10, 1.5 volts), 2x1gb Mushkin Redline xp4000 (280 3-3-2-8, 2.65 volts), 80GB WD
AM3 Rig
Lian-Li PC-75b case, Asus Crosshair III Formula, 965 x4 C3 @ 4.1 1.525 volts 2.8 NB 1.25 volts, 2x2gb Dominator GT Cas 8 2000Mhz@ 1720 6-6-5-18-22 1.725 volts, Asus 5770 VT @1010/1435, Seasonic 850watt PSU 2x12v rails 40 amps each, 36GB raptor boot drive, 80GB WD storage drive, HeatKiller LT cpu block, BI GTX 360 with 6x Scythe 3000RPM fans in push/pull, MCP 655 variable pump on setting 5, EK 150ml res, all 1/2 inch
DFI NF4 BIOS Guide
Just a small tid-bit, for those who don't know:
There is a measurable and real performance difference in SELECTED 3D apps between 8x and 16x PCI-E lanes.
In games this is rarely if ever visible, but in certain 3D apps the difference is there.
Just FYI.
What kind of 3D apps? 3D graphics apps?Originally Posted by halcyon
Enermax Noisetaker 470W
Opteron 165 @ 2700 mhz 1.375v CCBBE 0616XPMW | XP-120 w/ Akasa 120mm
DFI LanParty NF4 Ultra-D | Bios NF4LDB14
1GB G.Skill 4400LE
Club 3D X800XL@460/1100 | Silencer 5 rev. 2
DDR630@7-4-4-2.5-1T SuperPi 32M stable
I use one but i had to remove some pins, and bend anothers. It's working same temps stock cooler, but dead silent.Originally Posted by XiN
The graphics card fits in the middle of the zalman.
That Artic cooling chipset looks awsome, probably will keep temps like 30ºC also!
3D Modelling (pro) apps, but yes some games also show the miniscule performance difference as written above by others:Originally Posted by XiN
http://www.tomshardware.de/graphic/2...nalyse-09.html
Is vantec iceberg really better than the stock one????? The stock one looks more beefier.
My max chipset temp is about 45C, that's with room temp over 30C (summer in LA no AC, gotta love it) and under fool load (Prime95 Custom Blend)?
DFI NF4 Ultra-D, 7.04-2BTA BIOS
AMD Opteron 165 Denmark, CCBBE 0610 DPMW, 2.70GHz, 9x300, 1.350+104%
G.Skill ZX, PC3200, 2x1GB, 2.5-3-2-5-1T, 245MHz, 2.70V
eVGA GeForce 7600 GT 256MB, ForceWare 84.21, stock
Enermax EG495P-VE SFMA 2.0
Thermalright XP-90 w/ 92mm Panaflo H
DFI NF4 Ultra-D, 7.04-2BTA BIOS
AMD Opteron 165 Denmark, CCBWE 0551 UPMW, 2.61GHz, 9x290, 1.450+104%
G.Skill HZ, PC4000, 2x1GB, 3-4-3-6-1T, 237MHz, 2.60V
BBA Radeon X800 XL 256MB 440/545, Omega (Cat 6.12)
Enermax EG495P-VE SFMA 2.0
Thermalright XP-90 w/ 92mm Panaflo H
Ok...
MadMikeSS tried moving video card to the other slot and lost significant performance - so it's not worth it. Just finally ripped my rig apart today replaced the chipset cooler with the Vantec Iceberg. Chipset idle now is 34, load 39, about 10 deg lower - oh ya and used AS5 Tim (but I was using that with the stock chipset cooler too).
Anyways heres a look -
Last edited by dnottis; 05-24-2005 at 09:43 PM.
i7-2600k @ 4.8Ghz 1.38v L044A892
ASUS P8P67 LGA
16GB G.Skill Rip Jaws DDR3 1600Mhz Memory
1/2" ID Masterkleer, Swiftech MCP-655, Thermochill PA120.3 Rad, XSPC Rasa, MCW-60
Cooler Master UCP 1100 Watt PSU
GTX 680 1300/7000
Lian Li PC V-2000
aua, and that is so cool' i like it a lotOriginally Posted by kiwi
Asus P5-E X38 Intel QX9650 INOO3D 9800 Gx2 4x Super Talent's T800UX2GC4
Creative X-Fi Raid 0 Raptors 36Gb data 1Tb Seasonic M12 700w
Dell 2407WFP Lian-Li Pc-65 mod Custom Built Phase Change Unit |Logitech G25|
RIG#2: DFI LANPARTY LT X48-T2R|Q9550| INOO3D 9800GTX|
2xCellshok 1000| PC Power and cooling 750w Thermaltake v1
Wife: DFI LANPARTY UT P35-T2R|Q930|BFG 8800GTS 512MB|
Samsung ddrII 667| PC Power and cooling 610eps12v Thermaltake v1
Htpc:Dfi Sli-Dr Venus|3700+|2x1gb Team Group ddr500|Thermaltake Mozart TX
anybody tried the "ICEBERQ 4 PRO" or "ICEBERQ 5"?
They are supposivley better if they can fit.
4xOpteron 850 + 16 dimms (32GB)
Hail TYAN
Looks like very goodOriginally Posted by dnottis
||[b] Intel i7 4770K @ Phanteks PH-TC14PE || Asus Maximus VI Hero || 16 GB Gskill TridentX @ 2400MHz || CoolerMaster CosMoS S II || Asus GTX 780 @ AC Accelero Xtreme III[size=1]|| 24" BenQ XL 2410T @ 120HZ || 256GB Samsung 840 Pro || WD Green 1 TB , WD Green 2 TB || OCZ ZX 1000W || @ [size=1]|| Creative SoundBlaster Zx - Logitech Z-2300 || Logitech G19 || Logitech G700s|| [/color] ||
Originally Posted by dnottis
hi how about with stock n as5
It will help a bit, but get a cooler like my spire or the vantec iceberq4. It holds my chipset to ~35C with chipset @ 1.7V.Originally Posted by DjiNN
So far from what I'm seeing the ICEBERQ4 PRO doesn't fit. You need the ICEBERQ4. I just picked one up today and I will try fitting it to motherboard. A lil dremel work must be done but nothing too hardcore. I really need to find my AS5 though.Originally Posted by SHiRaKaWa
DFI NF4 Ultra D 3/10 Bios
A64 3200+ Venice LBBLE 0515FPBW
Thermalright XP-90C w/high speed Panaflow 92mm
OCZ Enhanced Bandwidth PC3500 (2 x 512)
1 Pioneer DVR-106
ASUS AX800XL PCI E
OCZ 520 Powerstream
now i did it as5 n stock cooling... and it seems fact it only 1C
it was 47 befor as5 an now it is 46 270 x4 htt n 1,5 v
A small L shaped heatpipe solution that can be mounted in 3 different directions would solve all problems with heat and placement of chipset on any motherboard.
Everything extra is bad!
I was already doing that - wasnt any good.Originally Posted by DjiNN
temps were like 40 - 48
i7-2600k @ 4.8Ghz 1.38v L044A892
ASUS P8P67 LGA
16GB G.Skill Rip Jaws DDR3 1600Mhz Memory
1/2" ID Masterkleer, Swiftech MCP-655, Thermochill PA120.3 Rad, XSPC Rasa, MCW-60
Cooler Master UCP 1100 Watt PSU
GTX 680 1300/7000
Lian Li PC V-2000
Well theres two fingers to those who said it doesnt fitOriginally Posted by dnottis
Nice and neat with the power lead too there!
£58.73 - This is the amount of money a loyal customer is worth to Overclockers.co.uk
Beware of buying from overclockers.co.uk, they will swindle you by abusing the consumer law if they need to refund you for faulty hardware. Thieving gits
Its 2x. I thought I saw something in the manual that suggested there was a way to jumper the 2nd slot to 16x?Originally Posted by XiN
switch the jumpers to SLI and it becomes 8x. no performance hit visible with my x700. infact, I beat my previous 3dmark record with it in this spot.Originally Posted by ewitte
AMD Athlon 64 3700+ @ 300x10________15" Macbook Pro
2x 512mb Mushkin DDR _______________2x 1Gb DDR2
Sapphire X850XT____________________X1600M
DFI Ultra-D_________________________2.16Ghz Merom C2D
Lian-Li PC7A________________________OS X/XP
PCP&C 610w Silencer
I'm working on that as we speak. I've got an aerocool vgacooler that needs a little work fitting on the chipset....Originally Posted by Ubermann
Bookmarks