Last ver on my www:Originally Posted by Friday~13rd
http://mardok.ovh.org/software/
Last ver on my www:Originally Posted by Friday~13rd
http://mardok.ovh.org/software/
NBBWE 0602DPCW i would guess
Representing The REAL 0nes
Excuse my english im still learning
1x A8N32 SLI Deluxe
1x 3500+ venice core
1x 2Gig OCZ DDR500 Platinum EB
2x BFG 7800GT OC in SLI
1x OCZ 520W Powerstream
1x X-Fi Xtreme Music
1x WD 250gb sata2 16mb cache
1x G15 Gaming keyboard
and plenty of other stuff...
Thank you for your reply Escobar999.
What makes you think that the 0602DPCW might be the better overclocker ?
I want ! But i'm from Singapore ... so it's pretty hard to send it over.Originally Posted by dz`
Anyway just to post some results, my LBBWE 0545 CPAW 3000+ [Venice E6] could do 2.68Ghz [297x9] @ 1.58V, on my AMD stock cooler. Temps were somewhere around 42C idle and 51C load. [Ambient temperatures are pretty high around here].
Just a pic to perk things up =D.
Changed my cooler to a Scythe Ninja, and same results [but significantly lower load temperatures], trying to get it to 2.7Ghz @ 1.6V. I'm thinking it's the chip, but i'm pretty satisfied as i've seen some others with 0545 can't hit 2.65Ghz with voltage below 1.6V, so i got a lucky one .
If possible, i might want to purchase a chip that can do better than mine, as i find that many 3000+ are pretty under-used or un-used already. Looking at something that can clock 2.7Ghz with less than 1.55V, so i can do some benching. I've always dreamt about a 0517. PM me if you have one for sale =D.
0602 are great OCer i think, and its the lowest in the batch numberOriginally Posted by greg64
Representing The REAL 0nes
Excuse my english im still learning
1x A8N32 SLI Deluxe
1x 3500+ venice core
1x 2Gig OCZ DDR500 Platinum EB
2x BFG 7800GT OC in SLI
1x OCZ 520W Powerstream
1x X-Fi Xtreme Music
1x WD 250gb sata2 16mb cache
1x G15 Gaming keyboard
and plenty of other stuff...
running chip test
http://i3.photobucket.com/albums/y90...963mhz3000.jpg
0610BAD
1500+ batch , mach2 coold htt coldbug @ 337
With all the over clocking going on what is the life span of a CPU? Do you leave it over clocked when you check your email?
If I over clock my Venice 3200+ to 2.4ghz, keep the temps and voltage normal will it go down with the sun or last into my old age?
Is long term over clocking a CPU killer?
AMD 64 3200+ Veince w XP-90
MSI K8N Neo2 Plat. | 2x512mb OCZ EL PC-3500 Gold GX
200gb Seagatel | ATI AIW x800 xt | SB Audigy Gamer
So far I haven't really read of anyone's cpu failing from overclocking over a period of time. Obviously it might reduce the lifetime of the cpu but by then it will be a good time to upgrade. I think everyone who overclocks leaves it overclocked as long as it's stable. I don't have any issues with leaving mine overclocked all the time, even if it sits there idle all day.
Originally Posted by Sleepy Samurai
yes, leave it overclocked. otherwise, what's the point? everything runs faster= yay for you!
fwiw, I ran my 3200+ Winchester on stock air cooler @ 2460mhz 1.65v for over a year, it still runs solid for my friend with a slight overclock. running a chip right now I've had for over 6 months...most of the time running 24/7 voltage between 1.55v-1.65v on air cooling and 2700-2808mhz. have benched as high as 1.75v for periods as long as a half hour and even the memory controller is still working perfectly. (or as perfectly as E3 mem controller can ). now it's even a naked chip (no IHS) with an air cooler that is mounted horizontally...both kind of dangerous...no problems!
these little chips are tough if you are careful with them they will probably run even highly overclocked much longer than you need them. as long as you keep temperatures low and don't push the voltage into the realm of stupidity, you definitely benefit from a 24/7 overclock imho.
naked X2 3800+ Toledo LCBIE 0618EPMW ]3020mhz@1.554v]
TT BigTyphoon
DFI LP UT NF4 Sli-D - 4/06 BT mod
PCP&C Silencer 750w
2x1GB Mushkin XP4000 Samsung C-UCCC @253mhz 3,4,3,8 1T @ 2.65v
eVGA 8800GT 512MB@ 787/1944/2244
grats. I wish I could hit 2.8Ghz stable nevermind 3GhzOriginally Posted by xenium
A64 3200+ @ 2600Mhz | Asus A8N-SLI Deluxe 1016 | XFX 7800 GT (510 / 1300) w/ ACS5
OCZ 2x512MB Gold Dual Channel DDR432 | Seasonic S12 500W | BenQ FP937S+ | Western Digital 160GB | Thermaltake Tsunami Dream
Hello ALL
Im have troube but i canot up my overclock over 2800 Mhz ...
This week i changed my memory and surprise , not good !
before : SAMSUNG DDR-400 512 MB x 2 - CL3 4-4-8
now : CORSAIR TWIN-x 1024 - 4000 PRO - DDR 500 CL3 4-4-8
Theses Samsung runing at 250 MHz ( DDR 500 ) and Theses CORSIR runing at 275 Mhz ( DDR 550 ) i get equal points in 3D Mark 2001 , 2003 , 2005 .
--------------------------------------------------------------------------
SAMSUNG
--------------------------------------------------------------------------
CORSAIR
--------------------------------------------------------------------------
Why ? Why ?
This Motherboard support strong overclocks ???
This Power Suply are efficient ??
In Sandra 2007 and Everest Ultimate Edition Corsair is better
This my 3rd Cpu in 939 Socket im try a X2-3800 and X2-4600 , but without sucess ...
( 4600 X2 )
http://valid.x86-secret.com/show_oc?id=90917
( 64-3500 with SAMSUNG )
http://valid.x86-secret.com/show_oc?id=96623
Thx all for listen me
AMD ATHLON 64 3500 @ 2750 - VENICE
CORSAIR Twinx 1024 - 4000 PRO ( DDR 500 )
Nvidia EN7900 GTX 512 MB by ASUS
Asus A8N32-SLI Deluxe
Colermaster Hyper 6 + 120
Power Suply Dynamic 550
Case ASUS VENTO 3600 - Red
its becuase your ram timings in the second one are just a hair slower and cpu is 22mhz lower. plus 01' is a crappy program to test performance on IMO. try running 05' and see the difference.
3200+ (looking for nice opty or 4400+) stock clocks :: Ocz gold 2x1GB ddr500 @ 250mhz
BFG 7900gtx OC stock (saving for another):: dfi lanparty ultra-d modded to SLI
OCZ modstream 520W :: 160gb WD IDE
Thx xenium , i will try lower my ram timmings :-)
Im tested in 3DK2001 , 2003 and 2005 ...
But im try again later !
Too much thx
Last edited by BR-PREDATOR; 06-14-2006 at 12:02 PM.
AMD ATHLON 64 3500 @ 2750 - VENICE
CORSAIR Twinx 1024 - 4000 PRO ( DDR 500 )
Nvidia EN7900 GTX 512 MB by ASUS
Asus A8N32-SLI Deluxe
Colermaster Hyper 6 + 120
Power Suply Dynamic 550
Case ASUS VENTO 3600 - Red
3dmark01 is better for testing differences in cpu performance than 05 is. the newer 3dmarks are very gpu dependant and cpu performance doesnt have as much of an impact. another program to try would be aquamark3 and see if your score inscreases, that is a more cpu dependent bench.
Coolermaster 690 | OCZ Powerstream 600 | Gigabyte P35-DS3L | E2140 @ 375x8 1.31vcore | 2x1gb G.Skill DDR2 800 | ATI X850XT PE @ 576/600
Inspiron 9400 | T2500 | Nvidia Go7800 | 2x1gb DDR2 667 | WUXGA+ w/ Truelife
Heatware: vtx_
Thx VTX , all tests is valid i think ....
im try anyelse ... now lower ltency memory
runing at 3.0 - 4-3-6
AMD ATHLON 64 3500 @ 2750 - VENICE
CORSAIR Twinx 1024 - 4000 PRO ( DDR 500 )
Nvidia EN7900 GTX 512 MB by ASUS
Asus A8N32-SLI Deluxe
Colermaster Hyper 6 + 120
Power Suply Dynamic 550
Case ASUS VENTO 3600 - Red
maybe i see the trouble ...
I tested this memory alone , in single channel and surprise !!!
Memory runing at 286 Mhz , and in dual channel runing max 2.75 ghz
Why ? trouble in memory ? or trouble in dual channel of my motherboard ?
Or in single channel is possible more clock ???
My memory are serial number ----5469 and 5470
Please anybody help-me :-(
my last test in single channel ....
http://valid.x86-secret.com/show_oc.php?id=100249
Thx
Last edited by BR-PREDATOR; 06-15-2006 at 11:39 AM.
AMD ATHLON 64 3500 @ 2750 - VENICE
CORSAIR Twinx 1024 - 4000 PRO ( DDR 500 )
Nvidia EN7900 GTX 512 MB by ASUS
Asus A8N32-SLI Deluxe
Colermaster Hyper 6 + 120
Power Suply Dynamic 550
Case ASUS VENTO 3600 - Red
Nice ! What stepping is that ?Originally Posted by xenium
Originally Posted by farksyI'am pretty sure he is using the same one.Originally Posted by xenium
i4memory.com
Main: E8400 @ 4Ghz / 1.32v (Q745 & Q807) | ASUS P5Q-E | 4GB Crucial Ballistix Tracer
Secondary: Intel E6600ES Step 5 B1 (3.6Ghz/1.38v) | P5B Deluxe | 4GB Micron D9GCT (OEM)
Laptop: IBM Thinkpad T60 [Core Duo T2500 - 2Ghz] | 2GB DDR2 | 100GB HDD | ATi Radeon X1400
HTPC: A64x2 3800+ @ 2.75Ghz/1.35v | DFI CFX3200-DR | 2x512MB GSkill GH | 6600GT | WD 160GB | Antec 500W Earthwatts | Antec 1000AMG | 32" LCD
Just run mem at 1/1Originally Posted by BR-PREDATOR
Use 10 multi and up the htt up to 275..
So...then yo will have 275*10=2750 and the mem 1/1..
Thx Overclocker , i will try it !
AMD ATHLON 64 3500 @ 2750 - VENICE
CORSAIR Twinx 1024 - 4000 PRO ( DDR 500 )
Nvidia EN7900 GTX 512 MB by ASUS
Asus A8N32-SLI Deluxe
Colermaster Hyper 6 + 120
Power Suply Dynamic 550
Case ASUS VENTO 3600 - Red
I've hit a wall at 2500MHz on my NBBWE 3500+... I can't understand why... ?
Don't most of these chips hit over 2600MHz? I have an 0606... My E3 3200+ was much better than this... and a lot cooler... this thing is hotter at stock than my 3200+ was OC'd to 2.8GHz at 1.7v.... Doesn't make sense.... Oh, and the IHS was still on the 3200... :/
What's the max voltage I should go for? I keep hearing different numbers... IE 1.65, 1.75, 1.55, etc.
Couldn't I test volts with OCCT at stock speeds until it gets unstable or above 55°C? Or is that unsafe?
Last edited by ksimp88; 11-01-2006 at 04:16 PM.
Rig Specs:
CPU: Athlon 64 3500+ Venice Socket 939 E6 NBBWE 06/2006(2530MHz Prime95 Stable, IHS removed) 230FSB @ 1.55v (Biostar Motherboard reads inccorrectly) With Tt BT HSF (Lapped)
RAM: GSkill 1GB DDR550 (2x512MB) 230FSB 2.5-4-4-8 1T @ 2.9V (only because this motherboard is retarded, this RAM can hit 300FSB at 2.5-4-4-8 1T @ 3.0v)
Motherboard: Biostar Tforce6100-939
Video Card: PNY 7600GS 256MB PCIE 700/900
Case: Aspire X-Dreamer II (Slightly modified)
Bookmarks