use the one where you can adjust it with the percentage...that can stack on top of the 1.55 volts
use the one where you can adjust it with the percentage...that can stack on top of the 1.55 volts
ASUS Maximus VI Hero
Intel 4770K Delidded @ 4.7GHz
Swiftech DDC w/Petras Top
EK Supremacy Direct to Die/MCW80 GPU
XSPC 120.4
2x8GB G.Skill
MSI 6950 2GB 975/1400
Samsung 830 2x128GB RAID0/WD 2x3TB RAID1
Corsair 800D with AX850W PSU
Dell U3011 30" LCD
hi guyz,
do any of you guyz kno where i could pick up one of these 3200+ or 3500+ venice cores from singapore? i tried looking for some but havent had any luck!
thanx alot for you help guyz..
My Rig
Abit IP35 Pro | Q6600 (L647G373) | Scythe Infinity | G.Skill PC6400HZ 2x1gb | PointOfView 8800GTS 320MB | Corsair HX620W | Antec SOLO
Believe me, mine is not the only one. Most of LBBLE 0515GPBW bought locally here can do that - this is really proven since we have a bunch of guys here who managed same or better results. Here is an example - CPU is watercooled.Originally Posted by P_1
Originally Posted by NiSMo
There's isn't any venice core in singapore yet, it will take at least 2-3 months.
has anyone gotten a dud yet? I'm getting 2.4Ghz with 1.5v on a 3200+ Venice
temps are sucking as well under watercooling at 43c
I'll try reseating the waterblock but these are pretty poor results IMO
Stepping would be usefullOriginally Posted by PanaBob
@ work, got stepping at home
it starts with an E
epew?(winchesters with epew stepping usually do bad...)Originally Posted by PanaBob
you ordered for NCIX. me too. last sunday, and i havent got my 3200+ yet ! did you order from the American NCIX or Vancouver ?Originally Posted by koei
AMD Opteron 165 CCBBE 0616 XPMW @ 2.9, 1.45v *323x9*, Thermalright XP-90
EVGA NF41 NF4, OCZ PC3200 2x1024 6-3-3-2, EVGA 8800GTS @ 600/900
Enermax EG651P-VE 550W *36a* 12v
sounds like EPEW, will know for sure when I get home
I'll reseat waterblock and up vcore to 1.6v and 1.7v
I went to Ncix Burnaby. I noticed that it was in stock on the website so gave them a call. They had 1 3000+ left so I told them to hold it for me.Originally Posted by Burnt_Ram
Main: i7 2700k @ 5.0Ghz, ASUS Maximus V Formula Z77
16GB Corsair Vengeance 1600, ASUS GeForce GTX680
2x240GB SanDisk Extreme RAID0, Seasonic Platinum 1000, Corsair H100
Server: i7 2700k, ASROCK Z68 Extreme7 Gen3
16GB Patriot 1600, 120GB SanDisk Extreme
5TB JBOD, Corsair 850TX, Corsair H100
Media: Phenom II X4 940BE, Biostar TA790GX XE
4GB Corsair XMS2 1066, VisionTek HD4850 512MB
60GB OCZ Agility 3, SilverStone ST400
what ! those buggers. well maybe they don't have any 3200+, that's what i ordered. the site says may 9th for arrival. so i'm hoping they be able to ship mine this coming week ! (crosses fingers)Originally Posted by koei
AMD Opteron 165 CCBBE 0616 XPMW @ 2.9, 1.45v *323x9*, Thermalright XP-90
EVGA NF41 NF4, OCZ PC3200 2x1024 6-3-3-2, EVGA 8800GTS @ 600/900
Enermax EG651P-VE 550W *36a* 12v
did you pick it up yet ? looking forward to seeing ANY results from NCIX cpu'sOriginally Posted by koei
AMD Opteron 165 CCBBE 0616 XPMW @ 2.9, 1.45v *323x9*, Thermalright XP-90
EVGA NF41 NF4, OCZ PC3200 2x1024 6-3-3-2, EVGA 8800GTS @ 600/900
Enermax EG651P-VE 550W *36a* 12v
I just finished building up my rig. As I expected, it booted up fine with the BIOS that the DFI cam with from Newegg, but as soon as I hit F8 in the Windows installation screen... BOOM! BSOD PFN_LIST_CORRUPT. So I went to my uncles house, got the 414-2 bios, saved it in a floppy and went back home. Only to realize I didn't have a DOS boot floppy. Drove back to my uncles house, made the floppy, went back home, booted into DOS, FLashed, and crossed my fingers.
Got to the F8 part of the install, and my hand was shaking as I hit the F8 key, so I slowly nudged the F8 key and to my surprise, evertyhing from there on out went fine. So this is the first post I make while the words I am typing are being processed by an AMD processor since my first computer back in 1998.
Feels kinda weird... I think I'm sorta seasick Having Intel systems for 7 years and switching to AMD now does weird things to my mind...
*EDIT*
My 3500+ seems to be a 1.35v version.
Last edited by Tibu; 05-07-2005 at 11:04 AM.
Originally Posted by PanaBob
Mines average so im not complaining. 2.45GHz at 1.52v works fine for my 3000+ on air. Id ebay yours and get a 3000+ and try again.
"Seems like you can hit 2.7ghz for average on 3000+ and 3200+ on air so I'm hoping for for at least 2.6ghz stable on air. Just need a good replacement to my winchester."
alot of people cant do 2.7 so id have to disagree there. your chances with a 3200+ is better however.
"Venice just barely loads Windows at 2.7 w/1.75vcore on good air."
good god back the volts down! How high can you get at like 1.55v?
"these Venice can take up to about 1.75v on air safely"
they wont last long and volts often doesnt help after a point. I am getting like 48c at 1.52v
3000+ Venice 240x9=2.16GHz(ondie controller limit) 2x512mb patriot tccd ram
9700pro at 325/310 runs all games buttery smooth!
9700(8 pipe softmod, 128m) at 410/325 23821 at 325/310 21287 at 275/270 19159
9500(4 pipes, 128m) at 420/330 18454 at 275/270 13319
9500(8 pipe softmod, 64m) at 390/310 19201 at 275/270 16052
9500(4 pipes, 64m) at 400/310 16215 at 275/270 12560
3dmark scores with Ti4200 and Ti4800se
Ti4200 at 340/730 19558 at 300/650 18032 at 275/550 16494 at 250/500 15295
3dmark scores with older gpus
Ti500 at 275/620 14588 Ti200 at 260/540 13557 MX440 at 380/680 11551
I already posted a picture above, 2.7GHz prime stable on water. Too bad my LEs doesn't go much higher. I am sure it can do more.Originally Posted by Burnt_Ram
Main: i7 2700k @ 5.0Ghz, ASUS Maximus V Formula Z77
16GB Corsair Vengeance 1600, ASUS GeForce GTX680
2x240GB SanDisk Extreme RAID0, Seasonic Platinum 1000, Corsair H100
Server: i7 2700k, ASROCK Z68 Extreme7 Gen3
16GB Patriot 1600, 120GB SanDisk Extreme
5TB JBOD, Corsair 850TX, Corsair H100
Media: Phenom II X4 940BE, Biostar TA790GX XE
4GB Corsair XMS2 1066, VisionTek HD4850 512MB
60GB OCZ Agility 3, SilverStone ST400
My 516 EPEW from Newegg wont prime higher than about 2.65, I already have a 2.7GHZ winnie though. Not impressed and it's as much hit or miss as the winchesters were.
i7-2600k @ 4.8Ghz 1.38v L044A892
ASUS P8P67 LGA
16GB G.Skill Rip Jaws DDR3 1600Mhz Memory
1/2" ID Masterkleer, Swiftech MCP-655, Thermochill PA120.3 Rad, XSPC Rasa, MCW-60
Cooler Master UCP 1100 Watt PSU
GTX 680 1300/7000
Lian Li PC V-2000
yeah mine is a EPGW 0512 and it suxorz so far, trying to get 2.55Ghz stable so RMA time it beMy 516 EPEW from Newegg wont prime higher than about 2.65, I already have a 2.7GHZ winnie though. Not impressed and it's as much hit or miss as the winchesters were.
what is this new bios that angrygames gave you? and where can we download it?Originally Posted by BlackDragon24
Warranty on VX is good up to 3.5V, so you probably don't need to lower the timings to get it stable.Originally Posted by av0
7700k @ 5.0GHz
ASUS Z170-Deluxe
2x8GB Avexir Raiden DDR4-3000 15-15-15-35
Gigabyte Aorus 1080 Ti @ 2076/1500(6000)
512GB Samsung PM961 + 840 Pro 256GB + some TBs
Corsair AX1200i
X-Star DP2710LED @ 110Hz + 40" Samsung TV
CPU and GPU under water: 9x120 rad + 3x120 + 3x120
...and an HTC Vive!
ahh dont you love a good worry free overclock!
"each driver release plays whack-a-mole with a few more annoyances" -inq
man, i can't wait to set up my new rig and test the venice. i already recieved my dfi nf4 ultra, venice 3000, connect3d x800xl, xp-120 w/panaflo m1a, and lian li pc-7 plus. gonna use my crappy kingmax value ddr400 ram for now (need to get some bh-5 or comparable) and all i need is for bfg to send me my rma 550w psu so i can get rollin. the mobo is probably gonna have bios 1/25, any suggestions as to what bios i should flash first?
This is the new bh-5 correct?
http://www.atacom.com/program/print_...EDD_OCZT_AG_G8
Last edited by shiznit93; 05-07-2005 at 10:05 PM.
Bookmarks