Does anyone know the points to solder to for vcore mod on 6200 pci-e none turnbocache version? I saw the guide with the Asus 6200 but the PCB layout is different.
Does anyone know the points to solder to for vcore mod on 6200 pci-e none turnbocache version? I saw the guide with the Asus 6200 but the PCB layout is different.
Main: i7 2700k @ 5.0Ghz, ASUS Maximus V Formula Z77
16GB Corsair Vengeance 1600, ASUS GeForce GTX680
2x240GB SanDisk Extreme RAID0, Seasonic Platinum 1000, Corsair H100
Server: i7 2700k, ASROCK Z68 Extreme7 Gen3
16GB Patriot 1600, 120GB SanDisk Extreme
5TB JBOD, Corsair 850TX, Corsair H100
Media: Phenom II X4 940BE, Biostar TA790GX XE
4GB Corsair XMS2 1066, VisionTek HD4850 512MB
60GB OCZ Agility 3, SilverStone ST400
same boat as you, still waiting on a vmod for my 6600, a there's nothing out there with my PCB.
well, aside from the vddr mod.
DFI LANParty DK 790FX-B
Phenom II X4 955 BE (1003GPMW) @ 3.8GHz (19x200) w/1.36v
-cooling: Scythe Mugen 2 + AC MX-2
XFX ATI Radeon HD 5870 1024MB
8GB PC2-6400 G.Skill @ 800MHz (1:2) 5-5-5-15 w/1.8v
Seagate 1TB 7200.11 Barracuda
Corsair HX620W
Support PC gaming. Don't pirate games.
can you post some pictures of the back of the card please.
The layout is identical to the 6200 conrad had.
http://www.xtremesystems.org/forums/...chmentid=25218
http://www.xtremesystems.org/forums/...chmentid=25217
Main: i7 2700k @ 5.0Ghz, ASUS Maximus V Formula Z77
16GB Corsair Vengeance 1600, ASUS GeForce GTX680
2x240GB SanDisk Extreme RAID0, Seasonic Platinum 1000, Corsair H100
Server: i7 2700k, ASROCK Z68 Extreme7 Gen3
16GB Patriot 1600, 120GB SanDisk Extreme
5TB JBOD, Corsair 850TX, Corsair H100
Media: Phenom II X4 940BE, Biostar TA790GX XE
4GB Corsair XMS2 1066, VisionTek HD4850 512MB
60GB OCZ Agility 3, SilverStone ST400
Can you tell me what is written on the chips I have marked please.
Says this on the middle one
4441M
445303
And lowest says
PMC
25LV512
Main: i7 2700k @ 5.0Ghz, ASUS Maximus V Formula Z77
16GB Corsair Vengeance 1600, ASUS GeForce GTX680
2x240GB SanDisk Extreme RAID0, Seasonic Platinum 1000, Corsair H100
Server: i7 2700k, ASROCK Z68 Extreme7 Gen3
16GB Patriot 1600, 120GB SanDisk Extreme
5TB JBOD, Corsair 850TX, Corsair H100
Media: Phenom II X4 940BE, Biostar TA790GX XE
4GB Corsair XMS2 1066, VisionTek HD4850 512MB
60GB OCZ Agility 3, SilverStone ST400
What does the top chip say on it (the square one with lots of pins)?
That would be the ISL voltage regulator chip. Pin 29 gives you a resistance of 11.95k on my card. There is a resistor right next to that pin that has the same resistance, and can be used to solder a VR onto. Problem is, no one knows how to find the VCore read point.
DFI LANParty DK 790FX-B
Phenom II X4 955 BE (1003GPMW) @ 3.8GHz (19x200) w/1.36v
-cooling: Scythe Mugen 2 + AC MX-2
XFX ATI Radeon HD 5870 1024MB
8GB PC2-6400 G.Skill @ 800MHz (1:2) 5-5-5-15 w/1.8v
Seagate 1TB 7200.11 Barracuda
Corsair HX620W
Support PC gaming. Don't pirate games.
bump
DFI LANParty DK 790FX-B
Phenom II X4 955 BE (1003GPMW) @ 3.8GHz (19x200) w/1.36v
-cooling: Scythe Mugen 2 + AC MX-2
XFX ATI Radeon HD 5870 1024MB
8GB PC2-6400 G.Skill @ 800MHz (1:2) 5-5-5-15 w/1.8v
Seagate 1TB 7200.11 Barracuda
Corsair HX620W
Support PC gaming. Don't pirate games.
Bookmarks