Average FX-55 Overclock?

[bradmax57]

Like the title says just wodnering what an average FX-55 overclcok on water would be? Im stuck around at 3.0ghz and was getting 2.9 out of my 4000+ so was hoping for a bit more?

[Sucka]

I'm thinking that's about normal for water.

[bradmax57]

I'm thinking that's about normal for water.

Oh well

[TuKo]

I'm getting 2.9GHz on water (0510 FX-55)

[SVTSnake]

I get 2.9 on water as well...

[geeman74]

i get 2.9 on water @ stock voltage

[Detrepid]

well I would say that 2.9 on water is a perfect average with these results even though there is a small sample size

[Tim]

2.9 here too, 3Ghz requires 1.75v....a bit too much for my comfort (on water but still) 0508 IIRC

[M.Yazıcıoğlu]

2850mhz=1.488vcore(Dialy)Stealth mod.
2950mhz=1.6vcore(Dialy)Spl mod.
3120mhz=1.75vcore(Bench)
All waterchiller.At 10~15cwater temp.

[perkam]

Hey bradmax, not a bad chip u have there, how bout a CPUZ shot of the chip at 3ghz, the memory timings, and a sandra run...that would help us see much better your situation. (yes I know he has a sig )

Perkam

[arj]

I got around 2.8Ghz at just under 1.7v with 30+ degrees ambient temperature.

[bradmax57]

I got around 2.8Ghz at just under 1.7v with 30+ degrees ambient temperature.

Mem is at 1:1 although it showing as 245? timings are 2-2-2-5 3.3v

[bradmax57]

30s super pi 1m

[cupra]

my 0442 fx-55 with water :

2.9g ~ stable
3.0g ~ not stable

28sec pi

[haPpydUde]

Mem is at 1:1 although it showing as 245? timings are 2-2-2-5 3.3v

In that screen you are using a 11.5 multi so no its not 1:1 half multi's use the next lowest full multiplier to divide.

[bradmax57]

In that screen you are using a 11.5 multi so no its not 1:1 half multi's use the next lowest full multiplier to divide.

Yeah lol I figured that out after my last post, impressive stuff for 2-2-2-5