Just warming up with 10x270 at 1.55 volts, memory at 245 2-2-2-2 with 3.5 volts. Rest of the specs are in my sig. I'm sure I can get some more out of it...
Temps never go above 40C, except for that damned chipset. Stupid 6800GT is exhausting right into the chipset fan until UPS shows up tomorrow.
Last edited by soul; 05-12-2005 at 09:43 PM. Reason: Listed the wrong vcore, fixed now
.
Motherboard: DFI Lanparty SLI-DR (nForce 4), revision AB0 with BIOS 510-2
CPU: Water cooled San Diego 3700+ at 10x271 with 1.6 volts, labeled:
- ADA3700DAA5BN
- CABGE 0512XPMW
Memory: 2x 512mb OCZ Value VX at 248 1.5-2-2-2 with 3.5 volts
Here is a fast test. More to come =)
Stepping:
ADA3700DAA5BN
CABGE 0515SPMW
Last edited by ante_ante; 05-12-2005 at 09:43 PM.
I no case. and the temp under load is:Originally Posted by rancid
Peter:
I am really confused how you managed those temps under load b/c myself, and many others "air-cooled" are seeing much higher temps. I average 45-48C under load and that is only 1.55V @ 2.69ghz.
My chip is a complete POS, it will do 2.75ghz but the machine shuts off for no apparent reason. I assume heat b/c it hovers 48-50C under loadThis is with an Xp-90 and a 92mm Tornado+7 case fans. Ridiculious...
The pics speak for them selvesI love this chip...
Tests with untweaked Win XP. will do some series win2k testing tonight
The whole world's hip and thats not cool !
Rip Van Hippy
Doesn't expecting the unexpected make the unexpected the expected ?
Light travels faster than sound. This is why some people appear bright until you hear them speak
-------------------------
in 1 day 90MHz+
weird
I love XS
Road to CompTIA A+ (601, 602) and Network+ (N10-003) Certifications
I want a Penryn 3.33G 12MB & quad sli Nvidia G92
I have had this guy in my computer for about 4 hours now. 2.9ghz SPi 32m stable. I am going to shoot for 3.0. This is on air but I will admit it is about 55 ambient right now. This is about what I am expecting once I get my water cooling up.
better frequency and time tomorrow
Last edited by cpulloverclock; 05-14-2005 at 12:41 PM.
Road to CompTIA A+ (601, 602) and Network+ (N10-003) Certifications
I want a Penryn 3.33G 12MB & quad sli Nvidia G92
@cpulloverclock
i've got almost identical results as you. pass occt at 3.17 (fx55 passed occt at 3.16) on vapoLS. i'm on SD3700 with 2x512 twinmoss utt. only difference is that i'm at 5:6 divider and your on 1:1. truly impressive results there.
i was able to pass 32m at 3.2; with your ram, i bet you can get down to 21min or low 22min.
i could really a 13x multi (i miss the fx55) since i'm stuck on the 3.3 rail with dfi (zippy incompatibility)
Last edited by jikdoc; 05-14-2005 at 05:29 PM.
i7 980x | corsair dominator 6x4 Gb | TJ07
SLI GTX 580x2 | GT430 | rampage 3 | corsair AX1200
LSI 9265 | OCZ vertex 128x4 raid0 | corsair c300 | hitachi 3tbx3 |
blocks: cpu hk 3.0 | gpu aquacomputer 580x2 | mb ek re3 fc | ram bitspower galaxy
pump: laing d5 x2 | res: koolance 452x2
rad: TC 120.3 120.2 | scythe GTx5
NASs: qnap 879 8x3tb | thecus N5200 2tbx5
Chip is from Monarch
ADA3700DAA5BN
CABGE 0515 SPMW
Set up
MB DFI Ultra-D with 310 Official Bios
Memory :GSkill LE PC 4400 at 246MHz 2.5-3-3-7
Cooling: Thermalright XP-120 with 120mm Panaflo at 110cfm
GFX: eVGA 6600GT at stock speed
Room Temperature : 29.4C
Last edited by agenda2005; 05-15-2005 at 06:35 AM.
Core 2 Duo E6600 [L625A] 3330MHz 1.375Vcore 24/7
Core 2 Duo E6600 [L640F] 3330MHz 1.475Vcore
Crucial 10th Anv 2 x 1GB DDR2-667 @ 463MHz 4-4-4-12
ASUS P5B Dlx
FOTRON BLUE STORM 500W
TT BT with stock Fan
Gigabyte Nvidia 7600GSw/ Silent Pipe
WD Cavier 250GB
Antec P160
yep, my vapochill PE modded has a compressor of 159W and it's too small but I try to help the original condenser (my dod) with full of fans, R22 gas helps a little...
the new dod will be better
4kw scroll compressor, a very big condenser and evapo
a friend has a 40kw
Road to CompTIA A+ (601, 602) and Network+ (N10-003) Certifications
I want a Penryn 3.33G 12MB & quad sli Nvidia G92
I know...I should've condensed things and SS'd multiple benches at once...oh well, shoot me...also forgot to SS my priming on these settings yesterday
Spent most of this evening working on overclocking and doing some WinXP tweaking...not terribly extensive, but it probably helps a little bit...
Used my previously Prime95 tested settings for the benches (passed 4+ hours yesterday before I got bored of messing around with my old computer and stopped it)
1.45 vCore
260x11
1.5-2-2-8 @ 3.4vDimm
OC'd my 6800GT a little up to 420/1150 (probably need to flash up to an Ultra BIOS to get more out of it)
well...without further ado here's some pictures of my progress thus-far
And a couple barely stable (read: websurfing, no gaming) highest speed Screenshots...got a bit higher than these, however much beyond these Screenies I couldn't even jump around in Firefox
I think my 3DMark scores are a little below average...is there any tweaking I should do to improve them?
Without any major memory tweaking the 2860 is about the max my CPU wants to do regardless of vCore...it's happy where I have it now...it wants 1.55v+ into the 2.9's, and 1.6+v just to mess around at 3ghz, past that I did 1.7v but backed down quickly...temps were still good, but I'm really leery of going that high on a 90nm chip regardless of temps (if I remember off the top of my head the 2860 I'm doing 1.3v LDT, and 1.5v Chipset...needed to max those both for the 3ghz)
Would appreciate it if someone could PM me with some memory settings to try out...mostly on "auto" settings right now since they seemed to work better for me than the 2 full settings I tried loading out
Last edited by saiamne; 05-14-2005 at 11:47 PM.
***System currently in limbo due to Cold Boot issues***
**(OC values stated below are pre boot-issue values)**
A64 4000+ San Diego (CABHE 0515 VPMW) ::current clock - 260x11 = 2860mhz::
DFI Lanparty SLI-DR (414-3 BIOS)
OCZ PC4000 VX Gold (2x512) ::current clock - 1.5-2-2-8 @ 260mhz (3.5vDimm)::
BFG 6800GT OC PCI-E w/ NV Silencer ::current clock - 420/1150::
HD's = 2x 74gb Raptor (RAID 0)
Enermax 600w SLI Certified ATX v.2.01 PS (3.3v@34a / 5v@34a / 12v1 and 12v2 @18a ea.)
Case = Thermaltake ARMOR (modded to add 1x 92mm bottom mounted, filtered, intake fan)
Cooling: HSF - Tt Big Typhoon w/ 120mm Panflo U1A @ 115cfm / Case Cooling - 4x 120mm Panflo U1A (2 intake, 2 exhaust) 2x 92mm Panflo U1A @ 69cfm (1intake, 1 exhaust) 1x 92mm Panflo U1A over RAM (aprox 300cfm total flow)
Just did some quick testing on a cheapo Gigabyte K8NF9 board while waiting for a new DFI NF4 board to arrive.Stock HSF and stock volts, in an enclosed case with an intake fan, but no exhaust fan! Don't ask!
Using OCZ 3700 Gold rev 3, as no point putting BH6 in this MB.
1.4v is good for 2.7, 1.5v for 2800. I can't wait to get this in my DFI board, and playing in the cold!
I know its not the biggest O/C in the world - but on a stock HSF, priming at 1.4v? I'm impressed!
CPU-Z Validation: http://valid.x86-secret.com/show_oc.php?id=17747
Last edited by fagin; 05-15-2005 at 02:09 AM. Reason: Include Cpu-z verification.
AMD 3800 X2, DFI NF4 SLI-DR, 2 Leadtek 6800GT, OCZ 3200 Platinum LE, OCZ 600.
sandiego 3700+
1.4v oc 2.78G(PRIME 95)
Here are my results, rock stable !
San Diego 3700+
CABGE 0515SPMW
DFI SLI-DR @ 510-3
Gskill 4800 FF
CPU & chipset watercooled
this e' our temporary result. unfortunately the motherboard it does not know them beyond the 310 of fsb. the cpu instead it does not appreciate inferior temperatures to -40°
maxxx& alex-ta & freezilla& dragonx21
Last edited by maxxxpct; 05-15-2005 at 10:57 AM.
I've used a radeon 7000 PCI for crystalmark and testlab
unpatched superpi
31 mp3 files and a total of 265MB
Last edited by cpulloverclock; 05-15-2005 at 12:12 PM.
Road to CompTIA A+ (601, 602) and Network+ (N10-003) Certifications
I want a Penryn 3.33G 12MB & quad sli Nvidia G92
my 24/7 settings
ram i know, the ram is junk.
my max pi 1m
all on water with IHS on. i have a DD-X Ultra coming from Drewmeister soon.
i plan on taking the IHS off to stabilize the 3000mhz on water
Air Cooled with XP-120 Week 0515 3700+ San Diego @ 2.88Ghz with 1.525V BIOS.
OCCT + S&M 2 passes stable.
http://www.thunder-keep.co.uk/site/h...x11-1.525V.jpg
http://www.thunder-keep.co.uk/site/h...525V_tests.jpg
Concorde
Road to CompTIA A+ (601, 602) and Network+ (N10-003) Certifications
I want a Penryn 3.33G 12MB & quad sli Nvidia G92
Been playing around with my sandy,
and I think I can push this baby a bit more.
Cooling : XP-90C with 92mm 38T Vantec Tornado at 5100RPM.
DFI ULTRA-D
cooling:XP90 with 92mm Zalman at 2500RPM.
Last edited by peter lu; 05-17-2005 at 08:09 AM.
in comparison
last bench cuz it is sold
Last edited by cpulloverclock; 05-17-2005 at 11:48 AM.
Road to CompTIA A+ (601, 602) and Network+ (N10-003) Certifications
I want a Penryn 3.33G 12MB & quad sli Nvidia G92
Got my 3700+ today:
ADA3700DAA5BN
CABGE 0516TPAW
with batch 606
1.71v with boxed cooler:
http://valid.x86-secret.com/show_oc?id=18328
I will put it on watercooling tommarow because the temps where verry high
*EDITed by IFMU*
Signature Removed by XS Staff for not following XS Policies
Forum Policies
Playing around with some low voltage at last. Here's the highest stable with 1.35v selected from BIOS. CPUZ shows 1.36v...
***
Last edited by drcrawn; 05-17-2005 at 07:18 PM.
Posting Permissions
Reply With Quote
Bookmarks