The Official Venice Overclocking Thread

[sluggard]

3000+ BH5@3,73v ultra-d vapo LS

1M


2M NB!- mem-timings should be same as on previous screenshot

[Benny Lodewijk]

0517 APHW LBBLE on air with Gigabyte G-Power Pro Cooler @ 3200 rpm, suicide screehshot



Validation : http://valid.x86-secret.com/show_oc?id=25623

[5-Clicks]

benny - do you use a Tagan 480w? SmartGuardian shows my +12v rail really low too...

here is the venice i just sold: LBBLE 0516CPBW


pathetic. i didn't raise the NB voltage though, but still...

[eage]

my 360w psu got a very nice rails then!!look!!no brand 360w

[TheMeatFrog]

For the most part I've been with out a decent set of ram since the day after I got this chip over 3 weeks ago. Since my new set of LEs arrived from OPB on the 1st and then earlier today the 7/2 bios was released I just had to play! I mean after all I've set a WR with this chip but we still haven't got to know each other.

Warmup, since the 0515 APAWs are know for a weak mem controller I just wanted to stress the CPU and not push the ram yet. BTW this is being Air cooled by my XP-90 in my Antec SOHO server case with the door closed.

SuperPI 32M
10 x 291 @ 1.55v
9:10 (180) mem divider


Time to push the memory and mem controller!

SuperPI 1M
10 x 291 @ 1.52v
no divider


1M at 2.91GHz was no problem as I expected but I was concerned about 32M...

SuperPI 32M
10 x 291 @ 1.55v


I was suprised at this result. I did not have to change a single timing. Lets move on to my final and my personal favorite test, Max 1M time.

SuperPI 1M
10 x 293 @ 1.52v


I could smell a 28 second 1M but I just couldn't pull it off. That should just about wrap it up, the pictures speak for themselfs. If everything goes according to plan I should have a 3000+ 0517 and some RedLine to play with sometime next week. Maybe with some RedLine running at 260MHz+ I'll be able to break the 28 second 1M mark on air so stay tuned!

[eage]

here is my screen shots!!anyway i cant hit 3G,in case my PSU is a 360W Thermaltake 20pins dude anyone can help me out ??i can get fully stable with 2.95G on 1.55V what do i need for more clocks??i use stock AMD Fan now.my BIG TYHOON soldbut samething only increase 6C on stock votage!

[exscape]

As posted in the 24hr primestable thread
Venice 3000+ LBBLE 0517DPMW @ 2.8GHz 1.472v, primestable for 28 hours before I stopped it.

http://exscape.org/2800.png

[eage]

this one ?prime95 i can do more than 30hours ,but but.....i forgot to take a shot i have this one now. [IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]

[eage]

As posted in the 24hr primestable thread
Venice 3000+ LBBLE 0517DPMW @ 2.8GHz 1.472v, primestable for 28 hours before I stopped it.

http://exscape.org/2800.png

this is mine 1.43V on AMD stock,too hot temp~~~anything greater than 55C will frozen .
[IMG][/IMG]

[tomati]

here is mine 3200+ 0517 bpew

ihs off ,26°c ambiant t°

spi 32M




prime 48h




edit : prime screen

[4rory]

I took out my 9800pro and poped in an old pci graphics card, it allowed for some better clocking, pc didn't shutdown at 1.65 anymore or 1.7 but i think 1.75 did shut down this is all voltages selected actually is -0.1v, I was able to get it to 3.2ghz before it restarted, didn't get a screeny tho but, On my way there I stoppedd at 2.99ghz for this.

I forget what the ram was at, this is a bad screeny I know but I had to do it twice lol becasue I clicked ok the first time after it was done.\\

Right now I got 18amps on my 12volt line, and 480watts total, Should I go down to 450 watts and 26amps on 12volt line, or should I go up to 520watts and more amps on the 12volt line.

[Absolute_0]

LOL 13A? wow thats low how many amps does that antec 550wat have? Right now I'm leaning for the 520modstream ocz.

Nice clocks there 4rory. And to think earlier you mentioend that you had a bad memory controller and had to use 1 dimm with max divider to go past 2.9, now you say you hit 3.2! Whatever you changed, excellent improvement, you've got a fine chip.

Yeah, you need something with more amps on the +12V rail. Modstream isn't bad, do you have the money for the 520 powerstream?

Anyhow, to stay relevant, here's my latest
0517 APJW 3000+ @ 2.86 Ghz

Now i am officially prime stable here, i have never let it run that long, no patience. Usually i run with less voltage because most of my tasks aren't as demanding as prime95, nothing important on my PC so works fine.

[OverClocker_gr]

These benchs are old and the vcore was way high my last tests with phase was 3250@ 1.66v...now i am with modded stock hsf because my single stage phase has a small prob.....

[jcpsad]

lowered my vcore a bit... 2808mhz at 1.63v

[starostise]

here is my new venice 3000+ 0517DPMW baught last week in a shop in Paris:






I'll see what it does with sp2004 when I'll have the time but somebody else have a venice 3000+ which pass OCCT at 2700@1.34V in air?
room temp was about 23°C

I saw that peter_lu had 2800@1.4V but the screen shows that he ran sp2004 for just 1min

[cpulloverclock]

update for my 3000+ 0517DPMW

soon 3.7GHz on cascade



frequency max spi 8M = 2983MHz but 5'02"1XX

[TheMeatFrog]

3000+ 0517APCW
Air Cooled by XP-90
SuperPI 32M

[Leverpospade]

3000+ 0520 EPMW
DFI NF4 ultra
1x512 MB A-data PC4000 (Have almost been killed, the only run memtest at max. DDR400).
Vapochill SE

24/7 - It haven't crached og lockup once.


My max screenable - so far. I can't get my FSB over 350 (This was med by blowing a 120 mm fan at the chipset cooler).

[[XC] 4X4N]

A new high for me Benchable 2.91 on air. Fails prime right away, but is fairly stable. Also a 32m at 2.8 which is 100% prime stable.

[LikwidKool]

Alrighty. I received a 3500+ CBBLE 0512 DPAW yesterday. So far so good. I can pass 8M Super Pi up to 2.9ghz (290x10 1.55v) If it passes 8M then it will do everything I need without a hiccup. 32m is just to damn long!

I can get a suicide shot at 3ghz but I can't do much other than browse. I tried 300x10 and 273x11 but nogo either way. Not to bad for a second hand cpu that I bought here for a great price!!! I have only had one other 2.8ghz+ cpu and it was a 3500+ claw that ran to damn hot. I am psyched to finally get a low voltage cool running 2.9ghz cpu!

[Cisko]

Dfi nF4 ultra-d
tccd adata pc4500
watercooling

@vstock

[by -=Merlin=-]

Hi





Merlin

[Perc]

Merlin: could you please tell us where you got this gem from? ewiz is selling the 3000 venice oem for 119$ and free shipping. can you imagine getting lucky and get a week 19th 3000 venice like this for 119$ and hitting 2900+Mhz. i'm tempted to order the 3000 venice from ewiz .

this chip right here week 19 from ewiz its a 0519DPJW LBBLE and heres the oc so far with a few benchies....

peace perc,

[Absolute_0]

My 0517 APJW running with a little more volts at 2.9 Ghz
2 hours prime stable and still going
(still air cooled by XP90)

[gundamit]

I picked up one of the Venice 3000+ CPUs that was being discussed in the Deals forum. At $115 I figured I could take a chance. I got a YBBLE 0524DPBW.

Early results are okay but not great. I'm SuperPi 32M stable at 2.7ghz on air. I think I'm pretty near the limit because I'm giving it almost 1.7v (1.55+13%) and that's usually where diminishing returns kick in hard. Surprisingly the Thermalright XP-90/Zalamn 92mm combo I'm using seems to be holding the temps at load to a MBM reported 42c.

I'm using the the shipping bios (3-10) on this new Ultra-D mobo and got my OCZ Platinum Rev.2 TCCD out of retirement. Still trying to tweak the settings a bit.