The Official Venice Overclocking Thread

[Boble76]

And same in fullscreen

[Tibu]

My new personal record of 260FSB 1:1 with my old school 1GB of Corsair BH-5. CAN YOU DIG IT?

[Tibu]

2.9GHZ personal barrier broken with same volts as 2.8. I think this is as far as the memory will go. Keep in mind this is on AIR with an XP-90C.

[Boble76]

Venice 3500+ 9x313Mhz SuperPi 8M 5minutes 20 seconds.

[xxmartin]

Could push my (watercooled) Venice a little higher today ...













http://arc.aquamark3.com/arc/arc_view.php?run=690897424

[s7e9h3n]

Is your memory not capable of 1:1 at 290+? What's it max out at? If you've gotta run a divider, I'd suggest upping the mult instead. My 3800+ loved the 11x mult and got some of it's best marks there. Here's what my 3800+ did @ 290x10 (stock hsf) for comparison:

[mongoled]

3000+ CBBLE 0512DPBW

Current 24/7 Setting


Suicide screenie

[arj]

LBBLE 0516GPBW

DFI NF4 SLI-D
OCZ4200EL
X850XT
Watercooled (ambient around 30 degrees)

[Badge56]

Venice 3200+ LBBLE 0516 running 2800 mhz stable....
One fast CPU....

[vapb400]

Currently on my LBBLE 0516EPEW cooled with Zalman CNPS7700.


Running a CPU/12 divider currently.
I can't get it into windows at 285x10 yet, and I don't wanna set the vcore too high.

Max stable at default voltage (1.36) is 250x10.

Memory maxes out around 250 (2-2-2-5), and I can get it to that speed at 1:1 and CPU/11, no luck getting it there at CPU/12.....yet.

LPEW sucks

[s7e9h3n]

Memory maxes out around 250 (2-2-2-5), and I can get it to that speed at 1:1 and CPU/11, no luck getting it there at CPU/12.....yet.

LPEW sucks

Hehehe, how about 250x12 @ default vcore?

[Jimbo Mahoney]

Best I can do with my new 3000+

Venice 3000+ on DFI Ultra D, BIOS 414-3
512 MB G.Skill 4400 LE


ADA3000DAA4BP
CBBLE 0512DPBW


This is a week 12 2005 chip
E rev AMD64 (Venice)




That's on a very good watercooling setup (NexXxos XP, 4.5 lpm flowrate, 26 feet head pressure, huge radiator = 0.12 C/W on CPU).

[PcCI2iminal]

DFI ULTRA D








3200+ @ 3040mhz




Asus SLI Deluxe
23449 3dmarks Venice @ 2860mhz 2x6800

11090 3dmarks Venice @ 2870mhz 2x6800

[[XC] 4X4N]

Just getting started with this 3200 from monarch, arrived Tuesday. LLBLE 0516 EPGW 2450 at default volt core. Pretty happy so far. My CBBID winnie needs 1.65v to get here. Will post max when I get there.

[[XC] 4X4N]

Max stable at default v-core looks to be 2550. Can boot into windows at 2.6, but can't pass even 1m of super-pi. Right now at 270x10@1.5v Running 32m pass right now. Looking for a little more stability then just 1m. If it passes, maybe I might make it to 2.8

EDIT: Here is 32m pass 10x270. Had to up divider (245 is right at the edge for this ram, one stick of twinmoss in sig died) and add a little more voltage. Will shoot for 2.8 tomorrow.

EDIT 2: 10x270@1.58v prime stable about 3 hours, still running. Temp still hasn't reached 40. Using XP-90 and panaflo fan. My winnie with same cooling, would reach 48-49 at about the same voltage.

[arj]

I played around with DI a few days ago but I think my mobo held me back as I was using the NEO2. 3D Mark over 300HTT is a no-go. Max superpi was 3Ghz and max screenshot 3.2Ghz.

[leotonch]

1.33V 10*270 CL2.5-3-3-8 2.7G PRIME95....
S/N#Z634606D51xxx

[xpr-k]

OC system :

• DFI lp ut nforce4 ultra-d --> stock bios 1/25
• AMD A64 3000+ Venice CBBLE 0512DPBW
• OCZ powerstream 520W
• 2x512MB twinmoss 'UTT'
• HIS X800XL iceqII
• H²O cooled -> Cathar G4 + DD heatercore + Laing D4 + 1/2" clearflex

Results :

• max HTT --> 445 HTT
• MAX FSB --> 243FSB/cas2 2 2 8 @ 3.2Vdimm / 10 passes test#5 . I'm having trouble getting higher even with extra Vdimm . Its most likely bios related as i'm still on stock bios . But the rest is working without one glitch and knowing DFI its better to leave it alone then ;-) (for now)
• 2500mhz : 277x9@1.4Vcore (166divider op DDR)
• 2600mhz : 289x9@1.4Vcore (166divider op DDR)
• 2700mhz : 300x9@1.4Vcore (166divider op DDR)
• 2772mhz : 308x9@1.45Vcore (150divider op DDR)
• 2826.8mhz : 314x9@1.5Vcore (150divider op DDR)
• 2880.1mhz : 320x9@1.55Vcore (150divider op DDR) --> SuperPi / aquamark 3
• 2934.1mhz : 326x9@1.63Vcore <--- max stable

2934@1.63Vcore isnt 100% stable , long torture session will end in a reboot . I'm gonna prime overnight @1.65 and see if it makes it.
Anything higher ends in a reboot , no matter what Vcore you trow at it . No error no bod just a black screen and a reboot .
Now all i need to learn is DDR overclocking on A64 , there's just so much to tweak ... :<

[[XC] 4X4N]

Now at 10x280@1.61v 32m super-pi pass. Will try prime later, still seeing how high it will go.

EDIT: Final update. Highest prime stable is 10x275@1.65v. Tried all the way to 1.7v, couldn't pass prime for more than 10-15 minutes. Looks like 2.7ghz@1.58v is where I'll run, not worth the extra voltage for just 50hz. I have some OCZ platinum rev 2 on the way to replace my twinmoss that died. Hoping for 10x275 or 9x300. One last screenie, 10x285@1.68v, was able to get sandra and a 1m pass of super-pi

[aMp]

This looks to be about average for an EPGW, sadly. I was really hoping for 2.8, especially with an H20 setup; it'll SuperPI at 2.8, but fails Prime instantly, even with 1.7v.

ADA3200DAA4BP
LBBLE 0516EPGW
3200 Rev.E 1.58V on a DFI Ultra-D (510-3)
PQI Turbo TCCD 1:1 2.5-4-3-7

[UCmajewski]

On a jacked Neo2 only wants to work on single channel.

LBBLE 0516 DPJW

Oh yeah stock cooler!

[ociadotnet]

LBBLE 0516CPBW 3000+ from Monarch

Other Specs:

CoolerMaster Mini Aquagate R80
MSI K8N Neo2 Platinum, 1.5 BIOS
OCZ PC-4800 2 x 512MB
Geforce 6800
74GB Raptor HDD

Running 166 divisor for now, not having much luck at 300 1:1 with this board.

[Burnt_Ram]

i just got this CPU today. sofar it's atleast an hour prime95 blend stable, 3dmark 2001, and 32M super pi.

[Burnt_Ram]

[daddy_fizz]

good so far
only took me 3 chips to get a good one

3200+ LBBLE 0515 EPGW or EGPW (i think... i forgot to write it down before i put it in the computer)

2800
280x10
1.5 V
still got some more priming to do.

~Fizz