Page 3 of 18 FirstFirst 12345613 ... LastLast
Results 51 to 75 of 440

Thread: The Official Venice Overclocking Thread

  1. #51
    Xtreme Member
    Join Date
    Apr 2005
    Location
    Finland/Järvenpää
    Posts
    229

    And same in fullscreen
    Finnish Overclocking Team


    E6600 @ 100% OC with Co2 | FX57 SuperPi 8M @ 4min 5.281s
    Abit IP35-Pro
    E8500
    XFX8800GTS (G92)
    aXeRam 2Gb PC-6400
    TT 750W
    Auzen Prelude 7.1 X-Fi
    TT Mozart |



  2. #52
    Xtreme Enthusiast
    Join Date
    Feb 2005
    Posts
    572
    My new personal record of 260FSB 1:1 with my old school 1GB of Corsair BH-5. CAN YOU DIG IT?


  3. #53
    Xtreme Enthusiast
    Join Date
    Feb 2005
    Posts
    572
    2.9GHZ personal barrier broken with same volts as 2.8. I think this is as far as the memory will go. Keep in mind this is on AIR with an XP-90C.


  4. #54
    Xtreme Member
    Join Date
    Apr 2005
    Location
    Finland/Järvenpää
    Posts
    229
    Venice 3500+ 9x313Mhz SuperPi 8M 5minutes 20 seconds.
    Finnish Overclocking Team


    E6600 @ 100% OC with Co2 | FX57 SuperPi 8M @ 4min 5.281s
    Abit IP35-Pro
    E8500
    XFX8800GTS (G92)
    aXeRam 2Gb PC-6400
    TT 750W
    Auzen Prelude 7.1 X-Fi
    TT Mozart |



  5. #55
    Xtreme Member
    Join Date
    Aug 2004
    Location
    Germany
    Posts
    114
    Could push my (watercooled) Venice a little higher today ...













    http://arc.aquamark3.com/arc/arc_view.php?run=690897424

  6. #56
    Phenom™
    Join Date
    Sep 2002
    Posts
    5,233
    Is your memory not capable of 1:1 at 290+? What's it max out at? If you've gotta run a divider, I'd suggest upping the mult instead. My 3800+ loved the 11x mult and got some of it's best marks there. Here's what my 3800+ did @ 290x10 (stock hsf) for comparison:

  7. #57
    Xtreme Addict
    Join Date
    Jan 2003
    Location
    Ayia Napa, Cyprus
    Posts
    1,368
    3000+ CBBLE 0512DPBW

    Current 24/7 Setting


    Suicide screenie

    Last edited by mongoled; 05-12-2005 at 05:17 AM.
    24/7 Settings - Closed Case Rig
    Prime95 29.8 build 5 | Blend | Stable +12 hrs
    SeaSonic X750 Gold 750W
    MSI X370 XPOWER Gaming Titanium
    Ryzen 5 3600X | AUTO | 1924SUT
    GSkill TridentZ F4-3600C15D-16GTZ @ 3800/1900 mhz | 1.44v | 15-17-10-15-42-28-266-16-1T
    Asus GTX 780 DCII OC @ 1332/3522 mhz | 1.3v
    Samsung 960 EVO 500GB
    EK-FB MSI X370 XPower RGB Monoblock | 1/2" ID
    Swiftech D5 MCP655 | EK-XRES 100 Revo D5
    Alphacool NexXxoS UT60 280 | 4 x Scythe GT AP-15 @ 5v
    Thermochill PA120.3 | 1 x SST-FN123 | 2 x Scythe GT AP-15 | @ 5v

  8. #58
    Xtreme Member
    Join Date
    Mar 2004
    Location
    Kuala Lumpur, Malaysia
    Posts
    203
    LBBLE 0516GPBW

    DFI NF4 SLI-D
    OCZ4200EL
    X850XT
    Watercooled (ambient around 30 degrees)


  9. #59
    Xtreme Member
    Join Date
    Nov 2004
    Posts
    107
    Venice 3200+ LBBLE 0516 running 2800 mhz stable....
    One fast CPU....

    2600k@4800mhz 1.4Vcore

    Radeon HD4870
    Asus P67 Sabertooth

    2 X Corsair Vengence DDR3 (2X4) 9-9-9-24
    Hauppauge TV
    Corsair Hydrocool200 EX
    Main drive Crucial C300 SSD.
    PWS: Seasonic Gold X 850W

  10. #60
    Xtreme Addict
    Join Date
    Jan 2005
    Location
    Northern VA
    Posts
    1,617
    Currently on my LBBLE 0516EPEW cooled with Zalman CNPS7700.


    Running a CPU/12 divider currently.
    I can't get it into windows at 285x10 yet, and I don't wanna set the vcore too high.

    Max stable at default voltage (1.36) is 250x10.

    Memory maxes out around 250 (2-2-2-5), and I can get it to that speed at 1:1 and CPU/11, no luck getting it there at CPU/12.....yet.

    LPEW sucks

  11. #61
    Phenom™
    Join Date
    Sep 2002
    Posts
    5,233
    Quote Originally Posted by vapb400

    Memory maxes out around 250 (2-2-2-5), and I can get it to that speed at 1:1 and CPU/11, no luck getting it there at CPU/12.....yet.

    LPEW sucks
    Hehehe, how about 250x12 @ default vcore?


  12. #62
    Xtreme Member
    Join Date
    Feb 2004
    Location
    Belfast, NI, UK
    Posts
    349
    Best I can do with my new 3000+

    Venice 3000+ on DFI Ultra D, BIOS 414-3
    512 MB G.Skill 4400 LE


    ADA3000DAA4BP
    CBBLE 0512DPBW


    This is a week 12 2005 chip
    E rev AMD64 (Venice)




    That's on a very good watercooling setup (NexXxos XP, 4.5 lpm flowrate, 26 feet head pressure, huge radiator = 0.12 C/W on CPU).

    :: 3DMark01=66,732 :: 03=71,879 :: 05=26,413 :: 06=18,772 ::

  13. #63
    Xtreme Family
    Join Date
    Dec 2004
    Location
    Republic of Hiroshima
    Posts
    2,641
    Last edited by PcCI2iminal; 05-14-2005 at 02:15 AM.
    Mojo
    Family
    Biostar TP55 XE - Core i7 860(ES) @ 4.2ghz - CNPS10X Extreme - G.SKILL 1600 - Galaxy GTX275 - Velociraptor 300GB x 2 - Zippy TypeR 600w
    Criminal
    Biostar Tpower X58A - 920~Gulf - G.SKILL2000CL8 - GTX580 - Intel 520 120GB - Antec HCP 1200w
    Biostar TP67XE/TZ77XE4 2500k~3770K - G.SKILL 2800 - GTX480 - OCZ Vertex2 50GB - Corsair AX1200
    Biostar Tpower X79 i7 3820 ~ E5 2680 - G.SKILL 2400C11 - GTX560Ti - Intel 520 120GB - AX1200i
    Kids
    P4GD1 - Pentium M 780 - XMS Xpert400 - GTX460 - Raptor 36GB - Aopen 560w



  14. #64
    100% Load 24/7
    Join Date
    Mar 2005
    Location
    Seattle
    Posts
    1,500
    Just getting started with this 3200 from monarch, arrived Tuesday. LLBLE 0516 EPGW 2450 at default volt core. Pretty happy so far. My CBBID winnie needs 1.65v to get here. Will post max when I get there.
    Attached Images Attached Images
    Main Rig
    i7 2600k l Asus P8P67 l 2x2gb Gskill l GTS450 l Venomous X l XClio 680

  15. #65
    100% Load 24/7
    Join Date
    Mar 2005
    Location
    Seattle
    Posts
    1,500
    Max stable at default v-core looks to be 2550. Can boot into windows at 2.6, but can't pass even 1m of super-pi. Right now at 270x10@1.5v Running 32m pass right now. Looking for a little more stability then just 1m. If it passes, maybe I might make it to 2.8

    EDIT: Here is 32m pass 10x270. Had to up divider (245 is right at the edge for this ram, one stick of twinmoss in sig died) and add a little more voltage. Will shoot for 2.8 tomorrow.

    EDIT 2: 10x270@1.58v prime stable about 3 hours, still running. Temp still hasn't reached 40. Using XP-90 and panaflo fan. My winnie with same cooling, would reach 48-49 at about the same voltage.
    Attached Images Attached Images
    Last edited by [XC] 4X4N; 05-15-2005 at 10:25 AM.
    Main Rig
    i7 2600k l Asus P8P67 l 2x2gb Gskill l GTS450 l Venomous X l XClio 680

  16. #66
    Xtreme Member
    Join Date
    Mar 2004
    Location
    Kuala Lumpur, Malaysia
    Posts
    203
    I played around with DI a few days ago but I think my mobo held me back as I was using the NEO2. 3D Mark over 300HTT is a no-go. Max superpi was 3Ghz and max screenshot 3.2Ghz.



  17. #67
    Registered User
    Join Date
    Apr 2004
    Location
    Hong Kong
    Posts
    48

    3200+ E3 Lbble 0515gpbw

    1.33V 10*270 CL2.5-3-3-8 2.7G PRIME95....
    S/N#Z634606D51xxx
    Attached Images Attached Images

  18. #68
    Registered User
    Join Date
    Jun 2004
    Posts
    37
    OC system :

    • DFI lp ut nforce4 ultra-d --> stock bios 1/25
    • AMD A64 3000+ Venice CBBLE 0512DPBW
    • OCZ powerstream 520W
    • 2x512MB twinmoss 'UTT'
    • HIS X800XL iceqII
    • H²O cooled -> Cathar G4 + DD heatercore + Laing D4 + 1/2" clearflex


    Results :
    • max HTT --> 445 HTT
    • MAX FSB --> 243FSB/cas2 2 2 8 @ 3.2Vdimm / 10 passes test#5 . I'm having trouble getting higher even with extra Vdimm . Its most likely bios related as i'm still on stock bios . But the rest is working without one glitch and knowing DFI its better to leave it alone then ;-) (for now)
    • 2500mhz : 277x9@1.4Vcore (166divider op DDR)
    • 2600mhz : 289x9@1.4Vcore (166divider op DDR)
    • 2700mhz : 300x9@1.4Vcore (166divider op DDR)
    • 2772mhz : 308x9@1.45Vcore (150divider op DDR)
    • 2826.8mhz : 314x9@1.5Vcore (150divider op DDR)
    • 2880.1mhz : 320x9@1.55Vcore (150divider op DDR) --> SuperPi / aquamark 3
    • 2934.1mhz : 326x9@1.63Vcore <--- max stable


    2934@1.63Vcore isnt 100% stable , long torture session will end in a reboot . I'm gonna prime overnight @1.65 and see if it makes it.
    Anything higher ends in a reboot , no matter what Vcore you trow at it . No error no bod just a black screen and a reboot .
    Now all i need to learn is DDR overclocking on A64 , there's just so much to tweak ... :<

  19. #69
    100% Load 24/7
    Join Date
    Mar 2005
    Location
    Seattle
    Posts
    1,500
    Now at 10x280@1.61v 32m super-pi pass. Will try prime later, still seeing how high it will go.

    EDIT: Final update. Highest prime stable is 10x275@1.65v. Tried all the way to 1.7v, couldn't pass prime for more than 10-15 minutes. Looks like 2.7ghz@1.58v is where I'll run, not worth the extra voltage for just 50hz. I have some OCZ platinum rev 2 on the way to replace my twinmoss that died. Hoping for 10x275 or 9x300. One last screenie, 10x285@1.68v, was able to get sandra and a 1m pass of super-pi
    Attached Images Attached Images
    Last edited by [XC] 4X4N; 05-16-2005 at 12:06 PM.
    Main Rig
    i7 2600k l Asus P8P67 l 2x2gb Gskill l GTS450 l Venomous X l XClio 680

  20. #70
    Xtreme Enthusiast
    Join Date
    Mar 2005
    Location
    San Jose, CA
    Posts
    597
    This looks to be about average for an EPGW, sadly. I was really hoping for 2.8, especially with an H20 setup; it'll SuperPI at 2.8, but fails Prime instantly, even with 1.7v.

    ADA3200DAA4BP
    LBBLE 0516EPGW

    3200 Rev.E 1.58V on a DFI Ultra-D (510-3)
    PQI Turbo TCCD 1:1 2.5-4-3-7


    165 @ 2.9 @ 1.45V | 2x1GB G.Skill HZ | NF4 Ultra-D
    MSI X1900XTX | G500 21" Trinitron
    X-Fi Fatality | Z-2300s | Little Dot MkIII | Beyerdynamic DT770 Pro
    TDX | Maze4 GPU | DDC Topmodded | BIP3
    Stacker STC-T01

  21. #71
    Xtreme Enthusiast
    Join Date
    Feb 2005
    Posts
    897


    On a jacked Neo2 only wants to work on single channel.

    LBBLE 0516 DPJW

    Oh yeah stock cooler!
    Attached Images Attached Images
    • File Type: png k8.PNG (24.5 KB, 4842 views)

  22. #72
    Registered User
    Join Date
    May 2005
    Posts
    1
    LBBLE 0516CPBW 3000+ from Monarch

    Other Specs:

    CoolerMaster Mini Aquagate R80
    MSI K8N Neo2 Platinum, 1.5 BIOS
    OCZ PC-4800 2 x 512MB
    Geforce 6800
    74GB Raptor HDD

    Running 166 divisor for now, not having much luck at 300 1:1 with this board.


  23. #73
    Xtreme Member
    Join Date
    May 2005
    Location
    Canada
    Posts
    111
    i just got this CPU today. sofar it's atleast an hour prime95 blend stable, 3dmark 2001, and 32M super pi.
    AMD Opteron 165 CCBBE 0616 XPMW @ 2.9, 1.45v *323x9*, Thermalright XP-90
    EVGA NF41 NF4, OCZ PC3200 2x1024 6-3-3-2, EVGA 8800GTS @ 600/900
    Enermax EG651P-VE 550W *36a* 12v

  24. #74
    Xtreme Member
    Join Date
    May 2005
    Location
    Canada
    Posts
    111
    AMD Opteron 165 CCBBE 0616 XPMW @ 2.9, 1.45v *323x9*, Thermalright XP-90
    EVGA NF41 NF4, OCZ PC3200 2x1024 6-3-3-2, EVGA 8800GTS @ 600/900
    Enermax EG651P-VE 550W *36a* 12v

  25. #75
    Xtreme Member
    Join Date
    Jun 2003
    Posts
    226
    good so far
    only took me 3 chips to get a good one

    3200+ LBBLE 0515 EPGW or EGPW (i think... i forgot to write it down before i put it in the computer)

    2800
    280x10
    1.5 V
    still got some more priming to do.

    ~Fizz
    Attached Images Attached Images
    E6600-testing*Ultra120-E*2GB G.Skill HZ*2.5TB of HDD *MSI 8800GTS*P5N32-E*OCZ PSU 520W*
    [/URL]

Page 3 of 18 FirstFirst 12345613 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •