Page 4 of 16 FirstFirst 123456714 ... LastLast
Results 76 to 100 of 377

Thread: List of DFI NF4 Ultra/SLI Bios

  1. 04-11-2005, 06:49 AM #76
    Bennah
    Bennah is offline
    Xtreme Addict
    Join Date
    Jan 2004
    Location
    Manchester (UK)
    Posts
    1,105
    Quote Originally Posted by EMC2
    --- Bennah ---

    You have to set the Vcore to non-default using Vid Special for the Vmem voltage changes to "stick" You mean you didn't read the multi-page bugs/fixes thread


    310 is a good starting point BIOS-wise for any mem. The 331's vary by type of mem but can be a little "touchy".
    Just finished installing the OS and came on here and seen this thread, didnt bother looking around tbh The manual... I dont know why they make them... does anyone actually read them ?

    Thanks, I'l check it out and see what I come up with.
    Reply With Quote Reply With Quote
  2. 04-11-2005, 07:32 AM #77
    FireDragon
    FireDragon is offline
    Xtreme Addict
    Join Date
    Jun 2004
    Location
    USA, Vermont
    Posts
    1,061
    Send a message via AIM to FireDragon
    Hey guys what do you think are the chances of this thread becoming a sticky as I think that it is rather relivent...at least to the DFI NF4 owners out there...does any one second, third it and so on? Just thought that it "might" be a good idea that this thread dosn't get lost among everything...as it could prove VERY helpfull to people in the future...

    Dragon
    http://smbach.com/mad.gif

    Opty 175 Rig
    Lian-Li PC75B case, Thermaltake BT w/ 165 CFM delta fan, Enermax 550watt PSU (36A on 12+), x1950 Pro, DFI Lanparty NForce 4 Ultra-d (moded for SLI so that i can use the second slot at 8x), Opteron 175 CCBWE 0547 TMPW (2.80, 280x10, 1.5 volts), 2x1gb Mushkin Redline xp4000 (280 3-3-2-8, 2.65 volts), 80GB WD

    AM3 Rig
    Lian-Li PC-75b case, Asus Crosshair III Formula, 965 x4 C3 @ 4.1 1.525 volts 2.8 NB 1.25 volts, 2x2gb Dominator GT Cas 8 2000Mhz@ 1720 6-6-5-18-22 1.725 volts, Asus 5770 VT @1010/1435, Seasonic 850watt PSU 2x12v rails 40 amps each, 36GB raptor boot drive, 80GB WD storage drive, HeatKiller LT cpu block, BI GTX 360 with 6x Scythe 3000RPM fans in push/pull, MCP 655 variable pump on setting 5, EK 150ml res, all 1/2 inch

    DFI NF4 BIOS Guide
    Reply With Quote Reply With Quote
  3. 04-11-2005, 07:34 AM #78
    vlad
    vlad is offline
    Xtreme Enthusiast
    Join Date
    Jun 2003
    Posts
    662
    I would say very GOOD! I second the motion.
    Reply With Quote Reply With Quote
  4. 04-11-2005, 07:37 AM #79
    FireDragon
    FireDragon is offline
    Xtreme Addict
    Join Date
    Jun 2004
    Location
    USA, Vermont
    Posts
    1,061
    Send a message via AIM to FireDragon
    The only reason I ask is because pretty soon it will get burried then no one will be able to find it and I have put quite alot of work into it on my free time...Pershoot has also made a rather nice contribution at that...

    Dragon
    http://smbach.com/mad.gif

    Opty 175 Rig
    Lian-Li PC75B case, Thermaltake BT w/ 165 CFM delta fan, Enermax 550watt PSU (36A on 12+), x1950 Pro, DFI Lanparty NForce 4 Ultra-d (moded for SLI so that i can use the second slot at 8x), Opteron 175 CCBWE 0547 TMPW (2.80, 280x10, 1.5 volts), 2x1gb Mushkin Redline xp4000 (280 3-3-2-8, 2.65 volts), 80GB WD

    AM3 Rig
    Lian-Li PC-75b case, Asus Crosshair III Formula, 965 x4 C3 @ 4.1 1.525 volts 2.8 NB 1.25 volts, 2x2gb Dominator GT Cas 8 2000Mhz@ 1720 6-6-5-18-22 1.725 volts, Asus 5770 VT @1010/1435, Seasonic 850watt PSU 2x12v rails 40 amps each, 36GB raptor boot drive, 80GB WD storage drive, HeatKiller LT cpu block, BI GTX 360 with 6x Scythe 3000RPM fans in push/pull, MCP 655 variable pump on setting 5, EK 150ml res, all 1/2 inch

    DFI NF4 BIOS Guide
    Reply With Quote Reply With Quote
  5. 04-11-2005, 07:40 AM #80
    vlad
    vlad is offline
    Xtreme Enthusiast
    Join Date
    Jun 2003
    Posts
    662
    Maybe we should pray to the gods of the sticky.
    Reply With Quote Reply With Quote
  6. 04-11-2005, 07:54 AM #81
    chunkylover77
    chunkylover77 is offline
    XS News
    Join Date
    Dec 2003
    Location
    North Carolina
    Posts
    1,083
    Send a message via MSN to chunkylover77
    Well I put it on the front page news so maybe a mod will decide it is sticky worthy. I certainly do. Great thread
    RIP Dad. I will miss you always.

    Q6600,DFI X48 T2R,280 GTX,4gig ReaperX,XiFi Prelude,LL TYR PC X-2000,Westinghouse 37,Klipsch 5.1 Ultra
    Reply With Quote Reply With Quote
  7. 04-11-2005, 08:00 AM #82
    FireDragon
    FireDragon is offline
    Xtreme Addict
    Join Date
    Jun 2004
    Location
    USA, Vermont
    Posts
    1,061
    Send a message via AIM to FireDragon
    Quote Originally Posted by chunkylover77
    Well I put it on the front page news so maybe a mod will decide it is sticky worthy. I certainly do. Great thread

    HA HA HA I love you (in a non gay way...) I never thought that I would have ANYTHING on the front page!!! w00t!!!

    I would like to take this opportunity to thank Pershoot for the flash guide and everyone else that has helped me out with this. (Feels like the MTV music awards...lol)

    Dragon
    http://smbach.com/mad.gif

    Opty 175 Rig
    Lian-Li PC75B case, Thermaltake BT w/ 165 CFM delta fan, Enermax 550watt PSU (36A on 12+), x1950 Pro, DFI Lanparty NForce 4 Ultra-d (moded for SLI so that i can use the second slot at 8x), Opteron 175 CCBWE 0547 TMPW (2.80, 280x10, 1.5 volts), 2x1gb Mushkin Redline xp4000 (280 3-3-2-8, 2.65 volts), 80GB WD

    AM3 Rig
    Lian-Li PC-75b case, Asus Crosshair III Formula, 965 x4 C3 @ 4.1 1.525 volts 2.8 NB 1.25 volts, 2x2gb Dominator GT Cas 8 2000Mhz@ 1720 6-6-5-18-22 1.725 volts, Asus 5770 VT @1010/1435, Seasonic 850watt PSU 2x12v rails 40 amps each, 36GB raptor boot drive, 80GB WD storage drive, HeatKiller LT cpu block, BI GTX 360 with 6x Scythe 3000RPM fans in push/pull, MCP 655 variable pump on setting 5, EK 150ml res, all 1/2 inch

    DFI NF4 BIOS Guide
    Reply With Quote Reply With Quote
  8. 04-11-2005, 08:08 AM #83
    vlad
    vlad is offline
    Xtreme Enthusiast
    Join Date
    Jun 2003
    Posts
    662
    Thank you Pershoot and everyone that helped him.
    Reply With Quote Reply With Quote
  9. 04-11-2005, 11:50 AM #84
    musk
    musk is offline
    Xtreme Member
    Join Date
    Feb 2004
    Posts
    188
    I think that the ISO image file should be built with multiple MOBO's on it. Why not compile as many Bios for "recent boards" and add them to the cd. I know the floppy would not be that great but a CD can hold a lot of bios's.

    I would be willing to help compile others.

    musk
    Get to know Musk

    ASUS P5B Deluxe
    2x1Gb GSkill HZ
    E6600 L629B361
    7950GT
    Bad Breath
    Reply With Quote Reply With Quote
  10. 04-12-2005, 09:36 AM #85
    THunDA
    THunDA is offline
    Xtreme Member
    Join Date
    Mar 2004
    Location
    New York
    Posts
    343
    Good Job guys !!.. This thread helped me make sense of all the bios that is available..

    Gona be flashing to the 3\31-3 later tonight...
    Reply With Quote Reply With Quote
  11. 04-12-2005, 10:36 AM #86
    Tony
    Tony is offline
    the jedi master
    Join Date
    Jun 2002
    Location
    Manchester uk/Sunnyvale CA
    Posts
    3,884
    Quote Originally Posted by FireDragon
    ok i have all the bios found but the 1.19...
    You don't want 1-19 or anything earlier than 2-25...trust me
    Got a problem with your OCZ product....?
    Have a look over here
    Tony AKA BigToe

    Tuning PC's for speed...Run whats fast, not what you think is fast
    Reply With Quote Reply With Quote
  12. 04-12-2005, 03:40 PM #87
    Quanticles
    Quanticles is offline
    Xtreme Member
    Join Date
    Feb 2005
    Posts
    260
    331-2 doesnt seem to be working very well with my tccd
    DFI NF4 SLI
    AMD 4200+
    BFG 6800 GT OC
    Corsair XMS 4400
    74GB Raptor
    Soundblaster Audigy 2 ZS
    Klipsch Promedia 5.1 Ultra
    520W OCZ Powerstream
    Reply With Quote Reply With Quote
  13. 04-12-2005, 03:43 PM #88
    THunDA
    THunDA is offline
    Xtreme Member
    Join Date
    Mar 2004
    Location
    New York
    Posts
    343
    Quote Originally Posted by Quanticles
    331-2 doesnt seem to be working very well with my tccd
    From what I gather the 331-3 is the one most are having luck with tccd..

    I just flashed tonight but considering I just built the rig last night I cant really comment on it yet..
    Reply With Quote Reply With Quote
  14. 04-12-2005, 03:47 PM #89
    pershoot
    pershoot is offline
    Xtreme Enthusiast
    Join Date
    Mar 2004
    Posts
    504
    331-3 is also good for bh-5 and ch-5 as well.
    Testing-
    ---
    DFI LP DK 790FXB-M2RSH - 1/16 Beta
    ---
    Phenom II X4 940 (CACVC AC 0850BPDW), 3.82GHZ (19x201) @ 1.46v (+150mv), NB: 2.61GHZ (x13) @ 1.3375v (11), HT: 2.61GHZ, PCI-E: 101MHZ, CPU: P-1 state
    ---
    OCZ Reaper, 2x2GB @ 2.015v, MaxMemClk-1066-5-5-5-15-20-195x4, DDR2-536, Tony's 1066 Phenom SPD
    ---
    Corsair HX620, Swiftech 2xMCR120-QP + MCRES-Micro, MCP-655, Vortex XP (D-tek Fuzion v1), 1/2"
    Reply With Quote Reply With Quote
  15. 04-12-2005, 03:55 PM #90
    vlad
    vlad is offline
    Xtreme Enthusiast
    Join Date
    Jun 2003
    Posts
    662
    Quote Originally Posted by THunDA
    From what I gather the 331-3 is the one most are having luck with tccd..

    I just flashed tonight but considering I just built the rig last night I cant really comment on it yet..
    Ill have to give it a try.
    Reply With Quote Reply With Quote
  16. 04-12-2005, 04:44 PM #91
    THunDA
    THunDA is offline
    Xtreme Member
    Join Date
    Mar 2004
    Location
    New York
    Posts
    343
    Quote Originally Posted by vlad
    Ill have to give it a try.

    Cool.. let us know how you make out.. Im still working on finding maxes for my stuff in general before I could start really tweaking stuff.. So I still have some time before I really get into it..hehe..
    Reply With Quote Reply With Quote
  17. 04-13-2005, 04:53 AM #92
    xgman
    xgman is offline
    Xtreme Mentor
    Join Date
    Jun 2002
    Posts
    3,336
    I found 310 final to be better than 331-3 for high/stable htt on tccd.
    {2012 27imac-3.4i7-680mx-32gb ram-768SSD+External TB Samsung840pro ssd + TB velociraptors-Moto828mkIII/Marantz/Amphion Sound-HPzR30w 2nd monitor}
    Reply With Quote Reply With Quote
  18. 04-13-2005, 04:56 AM #93
    FireDragon
    FireDragon is offline
    Xtreme Addict
    Join Date
    Jun 2004
    Location
    USA, Vermont
    Posts
    1,061
    Send a message via AIM to FireDragon
    The 2.17's are my PERSONAL fav's...I like them the best for UTT/BH5 type ram...

    Dragon
    http://smbach.com/mad.gif

    Opty 175 Rig
    Lian-Li PC75B case, Thermaltake BT w/ 165 CFM delta fan, Enermax 550watt PSU (36A on 12+), x1950 Pro, DFI Lanparty NForce 4 Ultra-d (moded for SLI so that i can use the second slot at 8x), Opteron 175 CCBWE 0547 TMPW (2.80, 280x10, 1.5 volts), 2x1gb Mushkin Redline xp4000 (280 3-3-2-8, 2.65 volts), 80GB WD

    AM3 Rig
    Lian-Li PC-75b case, Asus Crosshair III Formula, 965 x4 C3 @ 4.1 1.525 volts 2.8 NB 1.25 volts, 2x2gb Dominator GT Cas 8 2000Mhz@ 1720 6-6-5-18-22 1.725 volts, Asus 5770 VT @1010/1435, Seasonic 850watt PSU 2x12v rails 40 amps each, 36GB raptor boot drive, 80GB WD storage drive, HeatKiller LT cpu block, BI GTX 360 with 6x Scythe 3000RPM fans in push/pull, MCP 655 variable pump on setting 5, EK 150ml res, all 1/2 inch

    DFI NF4 BIOS Guide
    Reply With Quote Reply With Quote
  19. 04-13-2005, 08:39 AM #94
    fareastgq
    fareastgq is offline
    Xtreme Enthusiast
    Join Date
    Nov 2003
    Location
    Midwest
    Posts
    936
    Quote Originally Posted by FireDragon
    The 2.17's are my PERSONAL fav's...I like them the best for UTT/BH5 type ram...

    Dragon
    Perhaps the most under rated bios
    ALIENS are bringing my next kentsfield based rig in a UFO case!
    Reply With Quote Reply With Quote
  20. 04-13-2005, 10:12 AM #95
    vlad
    vlad is offline
    Xtreme Enthusiast
    Join Date
    Jun 2003
    Posts
    662
    Quote Originally Posted by THunDA
    Cool.. let us know how you make out.. Im still working on finding maxes for my stuff in general before I could start really tweaking stuff.. So I still have some time before I really get into it..hehe..
    I flashed to 3.31-3 this am and have been playing with it most of the day and so far to me it been about as stable as 3.10. Its memtest stable up to 330htt@3v any higher fails in test #5 no matter what the volts. I was able to boot at 330 then use clockgen to reach 340htt, It passed sandra and everest but failed super PI. I noticed i lost about 50mbs of bandwidth also a few of the default mem settings caused it to fail memtest untill i adjusted them.Once i get my new videocard im going to play with 3.10 3.10p & 3.31-3 to find which one works the best for me. If there are any others that you think work good with TCCD let me know & ill test it. Thanks.
    Reply With Quote Reply With Quote
  21. 04-13-2005, 09:26 PM #96
    Onepagebook
    Onepagebook is offline
    Banned
    Join Date
    Jan 2004
    Location
    Land of Buckeye
    Posts
    2,881
    OPB's update here:
    support E3/E4 cool n quiet

    http://www.xtremesystems.org/forums/...ad.php?t=59420
    Reply With Quote Reply With Quote
  22. 04-14-2005, 02:32 AM #97
    vlad
    vlad is offline
    Xtreme Enthusiast
    Join Date
    Jun 2003
    Posts
    662
    Thanks opb.
    Reply With Quote Reply With Quote
  23. 04-14-2005, 06:55 AM #98
    FireDragon
    FireDragon is offline
    Xtreme Addict
    Join Date
    Jun 2004
    Location
    USA, Vermont
    Posts
    1,061
    Send a message via AIM to FireDragon
    UPDATE

    4.14's now updated For Venice and SD support...Info given about ALL bios to date.

    Dragon
    http://smbach.com/mad.gif

    Opty 175 Rig
    Lian-Li PC75B case, Thermaltake BT w/ 165 CFM delta fan, Enermax 550watt PSU (36A on 12+), x1950 Pro, DFI Lanparty NForce 4 Ultra-d (moded for SLI so that i can use the second slot at 8x), Opteron 175 CCBWE 0547 TMPW (2.80, 280x10, 1.5 volts), 2x1gb Mushkin Redline xp4000 (280 3-3-2-8, 2.65 volts), 80GB WD

    AM3 Rig
    Lian-Li PC-75b case, Asus Crosshair III Formula, 965 x4 C3 @ 4.1 1.525 volts 2.8 NB 1.25 volts, 2x2gb Dominator GT Cas 8 2000Mhz@ 1720 6-6-5-18-22 1.725 volts, Asus 5770 VT @1010/1435, Seasonic 850watt PSU 2x12v rails 40 amps each, 36GB raptor boot drive, 80GB WD storage drive, HeatKiller LT cpu block, BI GTX 360 with 6x Scythe 3000RPM fans in push/pull, MCP 655 variable pump on setting 5, EK 150ml res, all 1/2 inch

    DFI NF4 BIOS Guide
    Reply With Quote Reply With Quote
  24. 04-14-2005, 06:56 AM #99
    FireDragon
    FireDragon is offline
    Xtreme Addict
    Join Date
    Jun 2004
    Location
    USA, Vermont
    Posts
    1,061
    Send a message via AIM to FireDragon
    You can ALL thank NiCKE^ for the bios information.

    Dragon
    http://smbach.com/mad.gif

    Opty 175 Rig
    Lian-Li PC75B case, Thermaltake BT w/ 165 CFM delta fan, Enermax 550watt PSU (36A on 12+), x1950 Pro, DFI Lanparty NForce 4 Ultra-d (moded for SLI so that i can use the second slot at 8x), Opteron 175 CCBWE 0547 TMPW (2.80, 280x10, 1.5 volts), 2x1gb Mushkin Redline xp4000 (280 3-3-2-8, 2.65 volts), 80GB WD

    AM3 Rig
    Lian-Li PC-75b case, Asus Crosshair III Formula, 965 x4 C3 @ 4.1 1.525 volts 2.8 NB 1.25 volts, 2x2gb Dominator GT Cas 8 2000Mhz@ 1720 6-6-5-18-22 1.725 volts, Asus 5770 VT @1010/1435, Seasonic 850watt PSU 2x12v rails 40 amps each, 36GB raptor boot drive, 80GB WD storage drive, HeatKiller LT cpu block, BI GTX 360 with 6x Scythe 3000RPM fans in push/pull, MCP 655 variable pump on setting 5, EK 150ml res, all 1/2 inch

    DFI NF4 BIOS Guide
    Reply With Quote Reply With Quote
  25. 04-14-2005, 07:06 AM #100
    vlad
    vlad is offline
    Xtreme Enthusiast
    Join Date
    Jun 2003
    Posts
    662
    Thanks NiCKE^!
    Reply With Quote Reply With Quote
Page 4 of 16 FirstFirst 123456714 ... LastLast
« Previous Thread | Next Thread »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules