do you guys know what is the going price for these new Venice when they hit the street? I think they'll be a few versions....3000, 3200, 3500, and 3800?
do you guys know what is the going price for these new Venice when they hit the street? I think they'll be a few versions....3000, 3200, 3500, and 3800?
I hope so crafty : ) I just hoping our shipping bios will work is mainly what im concerned with because I know there's none of them out now shipping with 3/10. I wonder if whoever has these venice chips and a DFI could see how far back in bios revisions on the DFI a venice is compatible with ; )
And I apologize for not checking my other thread first for more responses on the bios thing, I have it set for instant email notification but I only get them every once in awhile for some reason and not after every reply so if I made it seem like others weren't being helpful I apologize : )
sweet stuff
Have you managed to get her to do 3GHz yet?
Alec
Thanks, I'm glad I had some helpful input being new and all : ) Hope it goes well for you guys. This would greatly alleviate my concerns about purchasing an Ultra-D as I have the feeling they won't revamp the shipping bios until after venice is out and then i would have to wait even longer!
only 2.75-2.85 on water?
i see newcastles doing 2.9 suicide on stock cooling around!
With stock volts it does that.Originally Posted by shuRe
yeh... now imagine it at 1.6 - 1.7vcore!!!
ok... can we see some high vcore results
people dont stay at 1.4v with -40c
can you see the light? is it shining too bright? can you see the light at the end of the tunnel, i know i do, i know its true.
If one of you guys dont put 4 512M sticks in and test the memeory controller, Im gonna STRANGLE SOMEONE!!!!!
DO IT DAMMIT .... DO IT DO IT DO IT
GA-MA790GP-D4SH, 965BE, 3.8Ghz
Ultra120E, 4x2G Gskill 1066
2x 150G VRaptor raid, WD640AALS
8800GT 735/940/1685, LG-BluRay
How does it respond to higher voltages? 2.95GHZ on stock vcore is great but will it continue to scale this good with higher voltages?
Intel E6400 @ 3.2GHZ (1.35v) - Freezer Pro 7
Gigabyte DS3 C1 F8i
2GB G. Skill PK @ 400mhz 1:1 (4-4-4-12)
Asus EN6200 8 pipes enabled
250GB Hitachi T7K250
Fortron Blue Storm 500W
Antec P180
Same question here. If you guys look at the Clawhammer 3500+ thread you'll notice a common theme that people can do 2600 at around stock voltage, but going to 2700 has no bearing on voltage. So basically 2700 can not be achieved even though 2600 can be done at stock volts! I found this to be very odd... but now that I've seen to be true, I feel that unless someone shows me the max overclock at whatever voltage, I won't feel sure that the CPU can necessarily do more than that.Originally Posted by JDizzle
DFI nF4 Ultra-D
1 GB of OCZ PC3700EL Platinum TCCD
AMD 3500+ Clawhammer (XP-120)
eVGA 6200 -> 6600 softmod
holy crap!!!
i gunna have to save for 1 of these babies now instead of gettin a cheap ass ( but good) winnie
im gettin a cascade from pc-ice which will do -100c so im guessing from a 3500/3800 - ill see WAY past 3ghz
EDIT - PCICE you got my pm? cos i pmed you like 3 days ago and no reply yet :P:
AN OPEN MIND, WITH A CLOSED FIST.
Ice, bring it over to my house for some fun on water.. just come by after work....
i warn you though, my mobo has lock jaw and might not give you the chip back
Look a little closer at some of the screens, bro.Originally Posted by uwackme
EDIT: Have a pic link: http://www.xtremesystems.org/forums/...id=27376&stc=1
Last edited by mcnbns; 03-25-2005 at 12:19 PM.
7700k @ 5.0GHz
ASUS Z170-Deluxe
2x8GB Avexir Raiden DDR4-3000 15-15-15-35
Gigabyte Aorus 1080 Ti @ 2076/1500(6000)
512GB Samsung PM961 + 840 Pro 256GB + some TBs
Corsair AX1200i
X-Star DP2710LED @ 110Hz + 40" Samsung TV
CPU and GPU under water: 9x120 rad + 3x120 + 3x120
...and an HTC Vive!
It looks for be 2T command rateOriginally Posted by conrad.maranan
Asus Rampage Formula X48
Intel Q9650 @ 4.33GHZ
OCZ Platinum DDR2-800
Palit 4870x2
Creative Xi-Fi Extreme Music
Corsair HX1000
LL 343B Case
Thermochill 120.3
2xMCP355
KL 350AT
KL 4870X2 FC WB
DD Chipset Block
Originally Posted by mcnbnsGuys, this has been said at the beginning of this thread... It is NOT 4x512MB... It seems like CPU-Z reports wrong amount of RAM when running Venice... It was with 3800+ and now 3500+ that pc ice is testing...Originally Posted by situman
i thought the DFI doesnt have a bios that supports the new Venice cores, apparently they do now.
Asus Rampage Formula X48
Intel Q9650 @ 4.33GHZ
OCZ Platinum DDR2-800
Palit 4870x2
Creative Xi-Fi Extreme Music
Corsair HX1000
LL 343B Case
Thermochill 120.3
2xMCP355
KL 350AT
KL 4870X2 FC WB
DD Chipset Block
they do have a bios that supports the venice ? (DFI) of so then i am so releaved becuase i am getting a dfi mobo and the venice and i hope dfi ill support the vence and then let me update the bios. caues i don't have any other 939 cihp laying around.
P4 2.6c @ 3.27, thermalright sp-94 w/92mm 110.9 CFM fan
Asus P4C800-E Deluxe (Droop moded)
OCZ gold PC4000 2x512MB 2.5-3-3-7
ATI Radeon 9800 Pro 128
Thermaltake Xaser3 case
WD SATA 120BG, 2x74GB Raptors Raid 0
Sound Blaster Audigy ZS 7.1
ATI TV Wonder
You don't need a special bios to support Venice.
pc ice
1.4V? Awww.. give it hell, would ya?
Last edited by IvanAndreevich; 03-25-2005 at 01:13 PM.
i5 750 4.20GHz @ NH-D14 | 8GB | P7P55DLE | 8800U | Indilinx SSD + Samsung F3 | HAF922 + CM750W
Past: Q6600 @ 3.60 E6400 @ 3.60 | E6300 @ 3.40 | O165 @ 2.90 | X2 4400+ @ 2.80 | X2 3800+ @ 2.70 | VE 3200+ @ 2.80 | WI 3200+ @ 2.75 | WI 3000+ no IHS @ 2.72 | TBB 1700+ @ 2.60 | XP-M 2500+ @ 2.63 | NC 2800+ @ 2.40 | AB 1.60GHz @ 2.60Originally Posted by CompGeek
Pc Ice - Please allow me........Originally Posted by cheece2001
THE NEW REVISION VENICE (E3) CPU'S DO NOT APPEAR TO HAVE ANY COMPATIBILITY ISSUES WITH CURRENT NF CHIPSETS!!!!
I had no problems booting the 3800+ with my old MSI Neo2 NF3 mobo and it seems as if PcIce is doing well with the DFI NF4 board. My 3800+ did 3ghz @ default vcore but wasn't stable. These are obviously some awesome cpu's. I'm expecting to see a bench @ 3.4G with this cpu ...............
any suicide screenies yet? I wonder what the 3800+ does
I love the simple single stage unit
Last edited by saaya; 03-25-2005 at 04:53 PM.
Oh, and I forgot to say....for those that are wondering if these cpu's scale with voltage: They do scale, and very well if I may add. My 3800+ could take up to ~1.75-1.8V and didn't explode. But upping the Vcore didn't help beyond somewhere in the range of 1.65-1.7. Than again, you never know what a cascade could do with these VenicesOriginally Posted by s7e9h3n
whats the max??! including more vcore that is, come on ICE your toying with us!
"each driver release plays whack-a-mole with a few more annoyances" -inq
please give him a break man! hes busy and your not the only one pming him, people, please give him a break!Originally Posted by Korpse
the bios incompability you have all heard about is with the amd 90nm REV E4 chips, not E3! E4 is san diego (1mb l2 cache 90nm)Originally Posted by s7e9h3n
Bookmarks