venice on ice 2850mhz 1.38v -40°C

**Alec** · 03-25-2005, 08:53 AM

under phase change...
depends what winchester; go to the winchester oc stickie and see what the top 3500+ winchester clocks are (uner a similar phase change system).

I think the 3500+s do about 2.7 to 2.8GHz at high volts on maybe air and most likelly water.

My winchester does 2.6GHz @ 1.425vcore and 2.7GHz @ 1.575Vcore; so you can definatelly see a big difference in volts required in the two different steppings.

Alec

**isp** · 03-25-2005, 08:56 AM

Nice results with the phase change, no doubt.

Now how about air?

**cheece2001** · 03-25-2005, 09:00 AM

omg thats an amazing hcip. I am going to get my hands on those babies right when they hot the market. can't wait. I woun't regret moving from intel to amd now.

**saaya** · 03-25-2005, 09:00 AM

Originally Posted by d@rkn1ko

-40 cpu on single stage really hard

and pc ice is really good

Originally Posted by pc ice

it was cpu temp's.

Originally Posted by perkam

Ty, Alec, but what cooling are these chips on ? and can PC Ice test with a Winnie at the same spec, I want to see the diff between Winnie and Venice at same speed in 01/03, etc.

Perkam

winnies dont run at -temps

:P

a winnie at 2.2ghz would be cool to compare, but he doesnt have one afaik, and i dont think there would be a difference...

**...:::MadDog:::** · 03-25-2005, 09:00 AM

wOw... 2950 @ 1.40 its amazing...

**crafty** · 03-25-2005, 09:02 AM

I've got a brand new DFI ultra-d w/ 2x512 OCZ VX 4000 but no processor... I can't wait for one of these bad boys! Looks like my first overclocking experience will be a good one

(btw... my first post

)

**Master_G** · 03-25-2005, 09:06 AM

Welcome to the forum crafty!

What cooling will you be using?

G

**Alec** · 03-25-2005, 09:10 AM

Originally Posted by crafty

I've got a brand new DFI ultra-d w/ 2x512 OCZ VX 4000 but no processor... I can't wait for one of these bad boys! Looks like my first xtreme overclocking experience will be a good one

(btw... my first post

)

Welcome to XtremeSystems, Crafty. The place where we overclock the hell out of our pcs!

Youve got a nice motherboard and RAM there; a 3500+ or 3800+ venis would definatelly make your rig run at its full potential!

What cooling do you think your going to use?

Alec

**mcnbns** · 03-25-2005, 09:11 AM

Yay for Venice!

I'm loving this! These next couple months are going to be fun!

Now all we need is for Sapphire's mobo to come out...

**crafty** · 03-25-2005, 09:13 AM

Thanks for the welcome guys. I'm going to be starting off with an xp-90 and switching to water soon after. I've never built a watercooling kit before so I'm afraid to start off from scratch with a brand new machine

**chunkylover77** · 03-25-2005, 09:13 AM

SWEET!!!!!!! Man I hope my 3500 venice chip does as well as this one.

to you Crafty. You have just joined the most knowledgeable overclocking forum on the planet

**slayer899** · 03-25-2005, 09:14 AM

Originally Posted by mcnbns

Yay for Venice!

I'm loving this! These next couple months are going to be fun!

Now all we need is for Sapphire's mobo to come out...

YES

**agenda2005** · 03-25-2005, 09:15 AM

Originally Posted by STEvil

I might have to pull from the emergency fund... lol

Me too

**derubermensch1** · 03-25-2005, 09:32 AM

I can't wait to hear if that g.skill is FF with the supposed DDR600 1T guarantee or not as well ; ) Good thing I waited to upgrade if both of these are around the corner : )

I am new to the forums as well and am considering the same purchase as crafty with the DFI and VX : ) What concerns me is if we both have the boards and the memory and no cpu and we wait until venice ships, how will we be able to run it if the board needs a bios flash (DFI's are still shipping with 1/25 I believe?) Will it even let you boot with a floppy to flash or will we have to a) wait for a board with a shipping bios that supports venice b) buy a winchester or newcastle just to flash the bios c) something else my newbie a$s hasnt thought of : ) Figured I'd bring this up as crafty is in the same boat as me : ) I posted this elsewhere but no one really got back : ) Feel free to PM me an answer if this is too borderline and considered hijacking, dont want to pi$s anyone off my first day : P

Definitely curious about max oc with good air cooling...the anticipation is killing me, is that g.skill FF???? : )

**chunkylover77** · 03-25-2005, 09:47 AM

Originally Posted by derubermensch1

I can't wait to hear if that g.skill is FF with the supposed DDR600 1T guarantee or not as well ; ) Good thing I waited to upgrade if both of these are around the corner : )

I am new to the forums as well and am considering the same purchase as crafty with the DFI and VX : ) What concerns me is if we both have the boards and the memory and no cpu and we wait until venice ships, how will we be able to run it if the board needs a bios flash (DFI's are still shipping with 1/25 I believe?) Will it even let you boot with a floppy to flash or will we have to a) wait for a board with a shipping bios that supports venice b) buy a winchester or newcastle just to flash the bios c) something else my newbie a$s hasnt thought of : ) Figured I'd bring this up as crafty is in the same boat as me : ) I posted this elsewhere but no one really got back : ) Feel free to PM me an answer if this is too borderline and considered hijacking, dont want to pi$s anyone off my first day : P

Definitely curious about max oc with good air cooling...the anticipation is killing me, is that g.skill FF???? : )

I'm in the same boat as you with the bios flash. I get venice chip next week and I want to know if it will be recognized by the DFI board in particular. I also dont have another 939 chip laying around.

**Magnj** · 03-25-2005, 10:00 AM

yay, too bad I just bought a Super Castle. Thats ok, I'll let you crazy people find al lthe bugs first :P.

Please bench on Air

**~~Onepagebook~~** · 03-25-2005, 10:04 AM

you don't have to put those many "X" after Gskill..

I believe the pair of xxxx is the world's first one

Nice results.

**bachus_anonym** · 03-25-2005, 10:07 AM

Originally Posted by pc ice

you guy's havnt seen nothing yet.

im droping the chip off to OPP so he can baby sit it while i work today..

but i do know 1 thing is when these chip's are in store's im getting more than 1 of them..bad AZZ chip this is..

the -40c unit is used look's like this one.very simple unit.

Would that mean no tests on AIR ??? Only single-stage and cascade benching? I can't say I'm happy now, bud

Originally Posted by Onepagebook

you don't have to put those many "X" after Gskill..

I believe the pair of xxxx is the world's first one

Nice results.

Is that FF then, Kevin or PC5200 ???

**crafty** · 03-25-2005, 10:10 AM

Originally Posted by derubermensch1

I can't wait to hear if that g.skill is FF with the supposed DDR600 1T guarantee or not as well ; ) Good thing I waited to upgrade if both of these are around the corner : )

I am new to the forums as well and am considering the same purchase as crafty with the DFI and VX : ) What concerns me is if we both have the boards and the memory and no cpu and we wait until venice ships, how will we be able to run it if the board needs a bios flash (DFI's are still shipping with 1/25 I believe?) Will it even let you boot with a floppy to flash or will we have to a) wait for a board with a shipping bios that supports venice b) buy a winchester or newcastle just to flash the bios c) something else my newbie a$s hasnt thought of : ) Figured I'd bring this up as crafty is in the same boat as me : ) I posted this elsewhere but no one really got back : ) Feel free to PM me an answer if this is too borderline and considered hijacking, dont want to pi$s anyone off my first day : P

Definitely curious about max oc with good air cooling...the anticipation is killing me, is that g.skill FF???? : )

Two (3?) Venices have has overclocking results shown on this forum. I'm fairly sure we'll be able to boot with the venice chips and then update the bios. If not,

**UCmajewski** · 03-25-2005, 10:11 AM

hmm looks like I need to wait for venice!

**bachus_anonym** · 03-25-2005, 10:12 AM

Originally Posted by pc ice

you can be sad if you want..like i have siad a thousand times now..I WILL HAVE AIR / WATER result's..YES I WILL....

Great then! Don't be so nervous, pc ice...

(sits back and waits)

**Evil_Spork** · 03-25-2005, 10:14 AM

Originally Posted by Onepagebook

you don't have to put those many "X" after Gskill..

I believe the pair of xxxx is the world's first one

Nice results.

even you dont have any!

so far so good. venice looks to be close to what all the hype has been saying.

**Th3__W00T_GuY__** · 03-25-2005, 10:28 AM

go 4 water man!

**SET** · 03-25-2005, 10:28 AM

Good sounds

Beautiful images.

Very nice Clocks

I want to see results of 3200 +...

**enduracell** · 03-25-2005, 10:29 AM

Great job guys

Quick question: does E0 need a BIOS update on DFI to run or is it ok w/ last one? Thank you.

Thread: venice on ice 2850mhz 1.38v -40°C

Thread Tools

Search Thread

Rate This Thread

Display

Bookmarks

Bookmarks

Posting Permissions