My First Super Pi Ever! (a64@2700Mhz) comments?
Ok, well i was playin with my 3800+ some more. Got it to 2.7Ghz, on 1.6v Now, i backed my memroy off, as i didnt want to worry about it craping out. 2x 512mb TCCD 1:1 225Mhz 2t-2.5-3-3-6 (i know) If it runs 2.7 for a wile ill put the memoy back to 1t 2-3-3-6 and see what happends...
Anyways this is my first run at superpi...how dose it look? What am i looking for?
Ohh yea, im running windows XP pro SP2....not sure if that hurts or not...
Edit: lol, this is my everyday OS here too.. I had norton corprate running (includeing realtime scan) and Daemon tools
Would a fresh install with nothin incress the score....and dose this work on redhat 8?
Last edited by I(illa Bee; 03-21-2005 at 10:55 PM.
hmmm i set my memory back to 2-3-3-6 1t 2.75... will try 2-2-2-5 1t next, and try up to 3v if nessary.
anyways..LMK how this looks...
nice run for first time. if you are running TCCd, though. i would not recommmend 3.0v on the RAM. TCCD likes to hit high FSB at low volts with slightly relaxed timings.
I'd shoot for 265-275 FSB with a 10x multi as a base point. if you have something real good like G. Skill LE, you should even be able to scale above 275.
Like 2-3-3-6? 2.5-3-3-7?
leave 1t on at all time im assumming....
When it comes down to it...i play games...so a good fast OC that stabel is a good thing and the diffrence between 2.6Ghz 218MhzDDR 2-2-2-5 1t and 2.6Ghz 260Mhz DDR 2-3-3-7 1t is really nothing to me...
but its fun to benchmark and tweak with the best of them every now and then.
nice time there mate.
i also tried out my 3800+ on a asus a8n sli dlx...
board bios: 1005.003, vcore @ 1.68 (board max ) vdimm @ 3.0 (even though I could of left it stock )
Hmm... Ill have to see if i can get her up to 2.8Ghz...
I have not tried 2-2-2-5 yet at thease speeds..ill give it a try right now... :P
oh i see in your sig... you got a venice 3800+ if its 90nm... normal 3800+ newcastles are 130nm...
yea i really needed volts when i was going for my best super pi times but just didnt have the volts there to give to the ram.
Ohh crap..i didnt mean to put 90nm on there..i was reading the tread on the Vience core jsut before i edited that...
lol, ill edit it out, im running and old newcastle core.
Im not really going for the fastest time i can get, im just running it at the setting i find stabel for my gamming. I jsut tried 2.8Ghz but it was a no go.
2.6 i know is 100% stable, 2.7 is seeming more and mroe to run good, as ran thru the night last night with prime and a BFV Co-opp server running.
2.7 Is looking to be the sweet spot.
Last edited by I(illa Bee; 03-22-2005 at 09:49 AM.
hmmm i got it to run 2.8Ghz tonight with better cooling (cold outside air) but i cant complete Pi? give an error....
You need some tweaking.Originally Posted by Bennah
nice time there mate.
i also tried out my 3800+ on a asus a8n sli dlx...
board bios: 1005.003, vcore @ 1.68 (board max ) vdimm @ 3.0 (even though I could of left it stock )
Get Codereds A64 tweaker and use his recommended BH5 settings.
lol, didnt do any tweaking on there, could be bothered to.
I did on these runs thoughA64 3800+ NC with a stock cooler with room air...
on a neo2 plat, with 1.31b bios. got a slk-948u here i'l try out later and shoot for higher mhz and lower time.
Posting Permissions
Reply With Quote
Bookmarks