Page 1 of 12 123411 ... LastLast
Results 1 to 25 of 284

Thread: New OCZ BH-5 and VX , what to expect

  1. #1
    Xtreme Addict
    Join Date
    Nov 2002
    Location
    california or chicago
    Posts
    1,031

    New OCZ BH-5 and VX , what to expect

    I just wanted to make a few notes concerning some of the new OCZ products so that people have a fair idea of what there getting , And what speeds to expect , so I will make a quick list


    OCZ " Value VX " PC-3200 Value with winbond UTT - ( should be priced around 130-140 USD )

    This product is only tested for the value specification , but uses winbond utt, a very high percentage will do 220-240 with the right voltage , with I would guess half overall do above 240 ( 2-2-2 ). A small percentage will do 2-2-2 at 2.85-2.9 volts ( these are lucky sticks , not the norm )
    if your trying to squeeze a few extra Mhz try 2-3-2

    OCZ PC-3200 VX ( 2nd lowest in pricing about 200USD now and dropping )

    You guys should know what to expect now , but I will state it for the record
    these do on average 240 , many people after burn in get higher I have seen 250-260 ( I am sure not many do 260 ) , if your getting over 250 dont trade these in for VX-4000 , it just not a good deal if your trying to squeeze a few extra Mhz try 2-3-2


    OCZ-4000 VX ( price should be dropping )

    These should do at least the specification , but these of course dont have the same overhead the VX-3200 do , they are meant for those who want to hit 250 minimum, now some percentage of these will do 260 or even 265 after burn in , but thats not certain , only a very small percentage of the WB UTT chips meet our test specification for VX-4000.


    OCZ PC-3200 Gold 2-2-2 ( should be priced less than PC-3200 plat rev 2 )

    New Product using BH die , does 2-2-2 at 2.85 , higher speeds at higher voltages are possible but we dont screen for those , we screen for 2-2-2 at the lowest voltage


    For those of you who have asked , where do all the lower performing chips go
    most end up in these products.

    OCZ PC-3200 Value ( not listed as a winbond chip )
    OCZ PC-2700 performance


    Just wanted to make sure everyone knows what to expect.
    Last edited by ryanpgroovy; 03-21-2005 at 09:16 PM.
    OCZ employee and proud of it.
    If you have actually personaly experienced a problem with a OCZ product that was not solved quickly by our wonderful support staff I would like to know. Feel free to PM
    Thanks

    I am overclocked!

    "Posted on Mar 30, 2005 at 1:35 AM by StormGod
    In soviet Russia memory overvolts you! "

  2. #2
    I am Xtreme
    Join Date
    Mar 2005
    Location
    Edmonton, Alberta
    Posts
    4,594
    That's great info. I'll buy OCZ if you guys will live up to these claims. I'll take the 3200 gold, myself. WHen and where are they available?

  3. #3
    OCZ Product Specialist
    Join Date
    Mar 2004
    Posts
    897
    Quote Originally Posted by cadaveca
    That's great info. I'll buy OCZ if you guys will live up to these claims. I'll take the 3200 gold, myself. WHen and where are they available?
    3200 Gold is the newest product. It will take a week or two to get into the channels. This should be a hot item, so look soon.
    OCZ Marketing Team
    Email Me Here or Need Technical Support? Go to OCZ Support Forums

  4. #4
    Live Long And Overclock
    Join Date
    Sep 2004
    Posts
    14,058
    OCX PC-3200 Gold 2-2-2 ( should be priced less than PC-3200 plat rev 2 )
    OMG which chips on those !!!!!?????

    And kudos Ryan, always a treat having an OCZ rep telling us which ram we should be buying

    EDIT: Oh look its an OCZ thread party Ty to you too Andy. Hope Bigtoe doesnt show up lol I dont like editing my posts more than once lol j/k

    Perkam

  5. #5
    Xtreme X.I.P.
    Join Date
    Dec 2003
    Posts
    4,734
    Very fair and honest info from the manufacturer. I will to that...

    I like that one in particular, Ryan :thumbsup:
    Quote Originally Posted by ryangroovy - saying about OCZ PC3200 VX
    ...if your getting over 250 dont trade these in for VX-4000, it is just not a good deal...

  6. #6
    Xtreme Addict
    Join Date
    Nov 2002
    Location
    california or chicago
    Posts
    1,031
    I just want people to know what there getting , I mean sometimes people have strange expectations out of a product ,

    Example
    Just because half of the people hit 265 2-2-2 in a screen shot doesnt mean every unit can do that ,
    OCZ employee and proud of it.
    If you have actually personaly experienced a problem with a OCZ product that was not solved quickly by our wonderful support staff I would like to know. Feel free to PM
    Thanks

    I am overclocked!

    "Posted on Mar 30, 2005 at 1:35 AM by StormGod
    In soviet Russia memory overvolts you! "

  7. #7
    Xtreme Addict
    Join Date
    Oct 2004
    Location
    Boston, MA
    Posts
    1,448
    Quote Originally Posted by ryanpgroovy
    OCZ PC-3200 Gold 2-2-2 ( should be priced less than PC-3200 plat rev 2 )

    New Product using BH die , does 2-2-2 at 2.85 , higher speeds at higher voltages are possible but we dont screen for those , we screen for 2-2-2 at the lowest voltage
    <3

    File Server:
    Super Micro X8DTi
    2x E5620 2.4Ghz Westmere
    12GB DDR3 ECC Registered
    50GB OCZ Vertex 2
    RocketRaid 3520
    6x 1.5TB RAID5
    Zotac GT 220
    Zippy 600W

    3DMark05: 12308
    3DMark03: 25820

  8. #8
    Xtreme X.I.P.
    Join Date
    Dec 2003
    Posts
    4,734
    Quote Originally Posted by ryanpgroovy
    I just want people to know what there getting , I mean sometimes people have strange expectations out of a product ,

    Example
    Just because half of the people hit 265 2-2-2 in a screen shot doesnt mean every unit can do that ,
    I think this is what those people need to know... And maybe finally they will understand. 265 out of VX sticks for EVERYDAY and fully stable use is REALLY good. Those should be good for, say, 270 for some benchmarking. And those would be VERY lucky sticks.
    But one just can't expect 270 from every pair and RMA it when one hits 255 only... It's all about REASONABLE, down to earth expectations.

    Thanx Ryan...

  9. #9
    Xtreme Member
    Join Date
    Feb 2005
    Location
    Tokyo, Japan
    Posts
    109
    ryanpgroovy, please make 256MB of OCZ PC-3200 Gold 2-2-2, too.
    I love 256MB sticks.
    DFI LANPARTY UT P35-T2R (2007/11/07 BIOS)
    Intel Core2 Quad Q6600 L724A786
    2x Team Xtreem DDR2 667MHz CL 3-3-3-8 1GB
    SILVERSTONE ST56ZF 560W Fan Removed
    ATI XPERT 98 PCI
    GIGABYTE i-RAM

  10. #10
    Xtreme Infrastructure Eng
    Join Date
    Feb 2004
    Posts
    1,184
    Wow! Awesome info coming straight from a rep. Can you give us similar data for your TCCD line?
    Less is more.

  11. #11
    Xtreme Addict
    Join Date
    Nov 2002
    Location
    california or chicago
    Posts
    1,031
    :-)
    OCZ employee and proud of it.
    If you have actually personaly experienced a problem with a OCZ product that was not solved quickly by our wonderful support staff I would like to know. Feel free to PM
    Thanks

    I am overclocked!

    "Posted on Mar 30, 2005 at 1:35 AM by StormGod
    In soviet Russia memory overvolts you! "

  12. #12
    Live Long And Overclock
    Join Date
    Sep 2004
    Posts
    14,058
    Actually a lot better looking smiley would be:

    8^)

    LOL

    Perkam

  13. #13
    Registered User
    Join Date
    Jan 2005
    Location
    Bergen, Norway
    Posts
    20
    ryan: do you have a part number for the bh die?? How is the bh die compared to the utt?
    Last edited by un0kai; 03-22-2005 at 03:44 AM.

  14. #14
    I am Xtreme
    Join Date
    Mar 2005
    Location
    Edmonton, Alberta
    Posts
    4,594
    will be better if they are on brainpower, IMHO. I'll buy a pair just to try, if they are not too expensive.

  15. #15
    Memory Addict
    Join Date
    Aug 2002
    Location
    Brisbane, Australia
    Posts
    11,651
    Quote Originally Posted by ryanpgroovy
    I just want people to know what there getting , I mean sometimes people have strange expectations out of a product ,

    Example
    Just because half of the people hit 265 2-2-2 in a screen shot doesnt mean every unit can do that ,
    folks need to start posting full suite of results like i do i guess http://www.xtremesystems.org/forums/...ad.php?t=56679
    ---

  16. #16
    Xtreme Addict
    Join Date
    Apr 2004
    Location
    Auckland, New Zealand
    Posts
    1,012
    thanks for the heads up Ryan, is there any chance some of the VX line are using BH or are they all based on the CH/UTT die?
    VX/UTT Voltage Scaling, please contribute...

    10x260 _ 1T-2-2-2-8-7-15 _ 3.3vDIMM _ 1.75vCORE

    Mobile 3400+ CG 0437XDPW
    DFI LanParty UT
    XP120 w/ 120mm Thermaltake Thunderblade
    2x512MB OCZ VX
    BBATI 9800np w/Infineon
    PC Power & Cooling 510w Deluxe

  17. #17
    the jedi master
    Join Date
    Jun 2002
    Location
    Manchester uk/Sunnyvale CA
    Posts
    3,884
    Quote Originally Posted by cadaveca
    will be better if they are on brainpower, IMHO. I'll buy a pair just to try, if they are not too expensive.
    We only use BP PCB pretty much and have done for well over a year now. Remember we were pretty much the first to do so and all others have followed.
    Got a problem with your OCZ product....?
    Have a look over here
    Tony AKA BigToe


    Tuning PC's for speed...Run whats fast, not what you think is fast

  18. #18
    Xtreme Member
    Join Date
    Sep 2002
    Location
    Sydney, Australia
    Posts
    494
    Quote Originally Posted by Rabbi_NZ
    thanks for the heads up Ryan, is there any chance some of the VX line are using BH or are they all based on the CH/UTT die?
    also how UTT compares with the new BH-5?

  19. #19
    Xtreme Member
    Join Date
    Nov 2003
    Posts
    242
    I thought the "new" stuff would be the EL PC4000 VX Gold @ 2,2,2 (+/- 3.0v). What happened to that?

    P.S. I had just read a review yesterday over at Amandtech dated March 4th, 2005. Has the RAM been on the market for a while and Amantech just reviewed it late? Or is there some new stuff coming out?
    Last edited by REDKEN; 03-22-2005 at 05:59 AM.
    P4C800E DL,P4 2.4c @ 3.4(droop mod),1G Mushkin 3500 II 2,2,2,8 @ 3.1v,AIW 9800 Pro (450/370 @ 1.9v core),Audiology Platinum,2xDiamonds 8mb Raid0,Lian-Li Pc70,PC P & Cooling 510D,Plextor 708A,Plextor 52x32x52...water cooled...

  20. #20
    Xtreme Enthusiast
    Join Date
    Feb 2005
    Posts
    546
    Wow... I don't think there has ever been a time where at the same time the consumer has had so many chips performing at an average of 250fsb.

  21. #21
    Live Long And Overclock
    Join Date
    Sep 2004
    Posts
    14,058
    Yeah it seems like a last ditch swaree before DDR2 hits and it'll all go back to pc-4000 at cas 3 Hope not !!!

    Perkam

  22. #22
    Xtreme Member
    Join Date
    Feb 2005
    Location
    Ankara, Turkey
    Posts
    233
    OCZ and its reps: Thanks for your open and fair "what to expect" ations! As a disappointed geil customer (purchased ultra-x assumed to be TCDD, found out BH-5), I'll definitely buy OCZ next time, just keep on going!

  23. #23
    Xtreme Member
    Join Date
    Jan 2005
    Location
    UK
    Posts
    113
    Quote Originally Posted by ArcTan
    also how UTT compares with the new BH-5?
    I'd also like to know how it compares.
    Winchester 3000+ (CBBHD 0448 SPAW) @ 2.6GHz 1.440 VCore
    DFI LP NF4 SLI-DR
    GSkill LE 2x512MB @ 290MHz 2.5-4-3-7 3.0VDIMM
    ATI Radeon X800XT @ 540/510
    PCP&C 510 Deluxe SLI
    All Stock cooling
    Saitek Gaming Keyboard + Razor Diamondback Mouse

  24. #24
    Xtreme Addict
    Join Date
    Jun 2002
    Location
    Ohio, U.S.A.
    Posts
    1,697
    Quote Originally Posted by ryanpgroovy
    OCZ-4000 VX ( price should be dropping )
    Curious, what is MSRP? I just ordered a pair from newegg last week, it's going to go lower than $260?!

    Also, thanks for the heads up on the 3200 gold, care to say what that should be going for?

  25. #25
    Xtreme Addict
    Join Date
    Jun 2002
    Location
    Ohio, U.S.A.
    Posts
    1,697
    Quote Originally Posted by bachus_anonym
    It's all about REASONABLE, down to earth expectations.
    QFT. I think andy said it best in a thread a while back:
    "If we could get PC4400 speeds out of these we would be selling that."

Page 1 of 12 123411 ... LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •