Asus N6200GE 128MB vgpu/vmem mods, if anyone can help me with the voltage mods I'll be very happy. Here some pictures of the card.
Asus N6200GE 128MB vgpu/vmem mods, if anyone can help me with the voltage mods I'll be very happy. Here some pictures of the card.
Can you tell me what is wiitten on the 3 chips on the back of the card, and the chip at the top right of the card in the first picture please.
In the front picture of the card there are two IC's named 46 E8X 6K LM324.
In the back there are two IC's RT9214 PS6JFOG, one PMC 25LV512 and one named 45 EE1 2K ACT08.
Look the next 2 pictures for better view. Thanx for your help persivore.
The VMEM mod can be done in exactly the same way as for the 6600 (NON-GT) PCI-E card since it uses the same PCB. Check out: http://www.xtremesystems.org/forums/...ad.php?t=52587
The VGPU mod is still under investigation and I'm looking to find out as well! So please let us know when you find out!
DFI nF4 Ultra-D
1 GB of OCZ PC3700EL Platinum TCCD
AMD 3500+ Clawhammer (XP-120)
eVGA 6200 -> 6600 softmod
Its not the same PCB.
I'm just checking, but are both of the chips I have cirled RT2914's? If they are, can you check the voltage at the 2 points I have marked please.
http://www.drunken-student.co.uk/tom...ck62005vq.jpeg
Last edited by persivore; 03-21-2005 at 11:01 AM.
Umm... AFAIK I'm 90% sure it's the same PCB as long as you're comparing 128 MB Asus 6200 PCI-E to a 128MB Asus 6600 PCI-E! Now if you start comparing across brands, interface, etc I won't guarantee anything...Originally Posted by soki
Its not the same PCB.
DFI nF4 Ultra-D
1 GB of OCZ PC3700EL Platinum TCCD
AMD 3500+ Clawhammer (XP-120)
eVGA 6200 -> 6600 softmod
i highly doubt its the same pcb since the 6600GT needs alot mroe power and uses bga ram and this is tsop......
-CaT
Send Me Your Broken Hardware! - Repair Parts and vMod Research!
Need vMods? PM Me!
Exactly, but who said anythign about the 6600GT? Looks like you pwn3d yourself indeed...i highly doubt its the same pcb since the 6600GT needs alot mroe power and uses bga ram and this is tsop......
-CaT
Trust me, I've investigated these things a sh1tload, they're almost all the same between the 6200 and the 6600 (non-GT) but some are different. I'd say that the vast majority are not though.
DFI nF4 Ultra-D
1 GB of OCZ PC3700EL Platinum TCCD
AMD 3500+ Clawhammer (XP-120)
eVGA 6200 -> 6600 softmod
I made the mods, here you can see it.
Interesting... I would assume there was a pencil mod you could do for the vcore. Is that not possible?I made the mods, here you can see it.
Also, how far did you increase the voltages on the vcore and the vmem? Thanks!
DFI nF4 Ultra-D
1 GB of OCZ PC3700EL Platinum TCCD
AMD 3500+ Clawhammer (XP-120)
eVGA 6200 -> 6600 softmod
Vgpu from 1,36 @ 1,43 V. I gain in gpu overclocking from 520 @ 560 mhz .
Vmem from 2,49 @ 2,65 V. I gain in mem overclocking from 620 @ 655 mhz.
J thing You should try pencil mod on R626 or R627.just overshade one of thouse resistors and it should wrok
and try overshade the R321 resistor for V mem the resistor is near RT 9214.let me know if itś working.
Old tread.
ut just so everyone can find it.
http://www.vr-zone.com/?i=1915&s=1
And the mod works great
What mods can I preform to the card other than Vgpu and Vmem?
Could I add more capasitors and if, how do I deside where + and - are??
Posting Permissions
Reply With Quote
Bookmarks