MMM
Results 1 to 13 of 13

Thread: Help me with my TCCD sticks plz

  1. #1
    Xtreme Enthusiast
    Join Date
    Sep 2005
    Location
    Russia, Moscow
    Posts
    560

    Help me with my TCCD sticks plz

    hi everyone!
    got these wonderful sticks from xgman
    they are G.Skill PC4800FF with week 440 chips
    with the 0516 FX-57 @ 9 multi they are able to do 300 mhz SPi 8M stable @ this timings:
    Vddr: 2.8v increasing to 2.9V doesnt help to get more mhz
    Tcl: 2.5
    Trcd: 3
    Tras: 5
    Trp: 3
    Trc: 7
    Trfc: 12
    Trrd: 2
    Twr: 2
    Twrt: 2
    Trwt: 2
    Tref: 133MHz 1.95us (4196)
    Twcl: 1

    Bank int.: Enable
    Skew control: 255
    Drive strength: 7
    Data strength: 2 (4)
    Max. Async: 8ns
    Read Preamble: 5ns
    Idle Cycle: AUTO
    Dyn. Counter: Enable
    R/W Bypass: 16x
    Bypass Max: 7x
    32Bit Gran.: Disable

    i'm now going to switch to BigToes' 704-2BTA bios and see if it helps

    any suggestions about the timings?

    PS sry guys, no screenie for now as i'm using s3 2mb pci card that isnt able to show anything higher than 640x480 ((
    gonna buy another card and get you some screenies

  2. #2
    Xtreme Enthusiast
    Join Date
    Sep 2005
    Location
    Russia, Moscow
    Posts
    560
    forgot to add that i'm using dfi sli-dr rev AC0

  3. #3
    Xtreme X.I.P.
    Join Date
    Dec 2003
    Posts
    5,065
    What is your goal?

    Your timmings/DRAM settings are quite tight already. TRFC=14, TWCL-2 may allow you to gain a bit more stability, though. You seem to be on the right track with DS/DDS. Higher than DDR600 5-3-3-2.5-1T is where rocky road starts for a lot of average/good TCCD modules.
    I work for Corsair Components, Inc.

  4. #4
    Xtreme Member
    Join Date
    Sep 2005
    Location
    En mi casa, con tu señora.
    Posts
    109
    noob on board:

    ¿What means these things?

    Tcl: 2.5
    Trcd: 3
    Tras: 5
    Trp: 3
    Trc: 7
    Trfc: 12
    Trrd: 2
    Twr: 2
    Twrt: 2
    Trwt: 2
    Tref: 133MHz 1.95us (4196)
    Twcl: 1

    :sconf



    Sab?:banana:a usted que... el sitio lo hize yo.

  5. #5
    Xtreme Enthusiast
    Join Date
    Sep 2005
    Location
    Russia, Moscow
    Posts
    560
    @ bachus
    my aim is to reach about 310mhz @ 2.5-3-3-X to get max bandwidth to play with my opty 150
    i'll play with x2 3800+ with BH controller now and see if it improves anything
    i'll comback soon

  6. #6
    Xtreme X.I.P.
    Join Date
    Dec 2003
    Posts
    5,065
    Quote Originally Posted by \Karting_freak
    @ bachus
    my aim is to reach about 310mhz @ 2.5-3-3-X to get max bandwidth to play with my opty 150. i'll play with x2 3800+ with BH controller now and see if it improves anything i'll comback soon
    Well, don't get too excited just yet. It will take a lot more than good kit to get you there. Has this particualr kit been known to reach those speeds with the previous owner? Try TRCD=4 to see if that helps you get 310Mhz first. You will loose some bandwidth but fully stable DDR620 6-3-4-2.5-1T is a lot easier to come by for many TCCD sticks.
    I work for Corsair Components, Inc.

  7. #7
    I am Xtreme Ket's Avatar
    Join Date
    Apr 2004
    Location
    United Kingdom
    Posts
    6,825
    Quote Originally Posted by \Karting_freak
    hi everyone!
    got these wonderful sticks from xgman
    they are G.Skill PC4800FF with week 440 chips
    with the 0516 FX-57 @ 9 multi they are able to do 300 mhz SPi 8M stable @ this timings:
    Vddr: 2.8v increasing to 2.9V doesnt help to get more mhz
    Tcl: 2.5
    Trcd: 3
    Tras: 5
    Trp: 3
    Trc: 7
    Trfc: 12
    Trrd: 2
    Twr: 2
    Twrt: 2
    Trwt: 2
    Tref: 133MHz 1.95us (4196)
    Twcl: 1

    Bank int.: Enable
    Skew control: 255
    Drive strength: 7
    Data strength: 2 (4)
    Max. Async: 8ns
    Read Preamble: 5ns
    Idle Cycle: AUTO
    Dyn. Counter: Enable
    R/W Bypass: 16x
    Bypass Max: 7x
    32Bit Gran.: Disable

    i'm now going to switch to BigToes' 704-2BTA bios and see if it helps

    any suggestions about the timings?

    PS sry guys, no screenie for now as i'm using s3 2mb pci card that isnt able to show anything higher than 640x480 ((
    gonna buy another card and get you some screenies

    tref = 3120
    preamble = 6
    Tras = 8
    Trrd = 3
    Twr= 3
    Trwt= 3
    Trc: 7\12\16\18\20\22
    Trfc: 12\16\18\20\22

    dont try tight timings until you have STABLE timings for the speed you want, 8mb pi test is hardly that stressful

    "Prowler"
    X570 Tomahawk | R7 3700X | 2x16GB Klevv BoltX @ 3600MHz CL18 | Powercolor 6800XT Red Devil | Xonar DX 7.1 | 2TB Barracuda | 256GB & 512GB Asgard NVMe drives | 2x DVD & Blu-Ray opticals | EVGA Supernova 1000w G2

    Cooling:

    6x 140mm LED fans, 1x 200mm LED fan | Modified CoolerMaster Masterliquid 240

    Asrock Z77 thread! | Asrock Z77 Extreme6 Review | Asrock P67 Extreme4 Review | Asrock P67 Extreme4/6 Pro3 thread | Asrock Z68 Extreme4 thread | Asrock Z68 Extreme4 Review | Asrock Z68 Gen3 Thread | 8GB G-Skill review | TK 2.ZERO homepage | P5Q series mBIOS thread
    Modded X570 Aorus UEFIs

  8. #8
    Xtreme Enthusiast
    Join Date
    Sep 2005
    Location
    Russia, Moscow
    Posts
    560
    my hdd became crazy. looks like i need to install the new sys
    @bachus
    gonna try it tomorrow
    @Ket
    tryed loosing those timings before. improved by 2-3mhz but i gonna try it again
    i know 8M isnt that stressful, but it is the sweet spot for becnhies and it takes only about 5 min

  9. #9
    Xtreme Enthusiast
    Join Date
    Sep 2005
    Location
    Russia, Moscow
    Posts
    560
    btw, what bios would you advise?
    704-2bta or 623-3? or 510-3Fixed?

  10. #10
    namu daishi henjo kongo
    Join Date
    Jan 2005
    Location
    Somewhere in Germany
    Posts
    771
    I had mine (OCZ Platinum TCC5 and OC-Weat TCCD) running with 2,94 V at the DFI Ultra-D @ 300 MHz

    Tcl: 2.5 (maybe 3.0)
    Trcd: 4
    Tras: 7
    Trp: 4
    Trc: 12
    Trfc: 16
    Trrd: 3
    Twr: 2
    Twrt: 1
    Trwt: 3
    Tref: 4708
    Twcl: 1

    Bank int.: Auto
    Skew control: 0
    Drive strength: Auto
    Data strength: Auto
    Max. Async: 8ns (or try 9 ns)
    Read Preamble: 5ns (or try 6 ns)
    Idle Cycle: 64 or 32
    Dyn. Counter: Enable
    R/W Bypass: 8 x
    Bypass Max: 6 x or 4x
    32Bit Gran.: Disable

    I used the 702-1 from XS...

    *click*
    Last edited by stummerwinter; 03-19-2006 at 12:40 PM.
    Quote Originally Posted by NEW MODEL ARMY - the attack - 1984
    Now the talking's over, plans are laid and the hour is set
    Glances round the table, eyes all shining, dark and bright
    We meet again at daybreak for the day that will be ours
    We're tomorrow's history. So just check your weapons, say your prayers.

  11. #11
    I am Xtreme Ket's Avatar
    Join Date
    Apr 2004
    Location
    United Kingdom
    Posts
    6,825
    o yea, u might want to try FX60 beta bios, and screw benchies, benchmarks suddenly become 100% less impressive when somone asks "is it game stable?" and the thread starter replies "oh no, just benchmarks"

    thats like me saying i can get my TCCD to DDR650 but its actually only stable up to DDR620 ish

    "Prowler"
    X570 Tomahawk | R7 3700X | 2x16GB Klevv BoltX @ 3600MHz CL18 | Powercolor 6800XT Red Devil | Xonar DX 7.1 | 2TB Barracuda | 256GB & 512GB Asgard NVMe drives | 2x DVD & Blu-Ray opticals | EVGA Supernova 1000w G2

    Cooling:

    6x 140mm LED fans, 1x 200mm LED fan | Modified CoolerMaster Masterliquid 240

    Asrock Z77 thread! | Asrock Z77 Extreme6 Review | Asrock P67 Extreme4 Review | Asrock P67 Extreme4/6 Pro3 thread | Asrock Z68 Extreme4 thread | Asrock Z68 Extreme4 Review | Asrock Z68 Gen3 Thread | 8GB G-Skill review | TK 2.ZERO homepage | P5Q series mBIOS thread
    Modded X570 Aorus UEFIs

  12. #12
    Xtreme Enthusiast
    Join Date
    Sep 2005
    Location
    Russia, Moscow
    Posts
    560
    @Ket
    do you mean Oskar Wu beta FX-60 @ techpowerup? i'll try it to as i have X2 4800+ B2 controller

  13. #13
    Xtreme Enthusiast
    Join Date
    Sep 2005
    Location
    Russia, Moscow
    Posts
    560
    i HATE my sli-dr!!!
    it crashed my ntfs file systems on 2 hdds
    gonna try it again and see what happens ))

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •