Mushkin BLUE UTT looking good!

[Monge]

I have a Blue Mushkins dualkit with UTT/BH-5 that run Superpi 32M 9*245Mhz@3.3v 2-2-2-5 on DFI Lanparty Ultra-D bios 510-2/Venice 3000+ 0517DPMW. But can someone please post their memory setting in bios/A64 tweaker. I wish I could go higher. One stick run 251Mhz and the other 246Mhz memtest86+ clean. My sticks seems not to like higher voltage at 3.4v.
Monge

[Arkangyl]

I got the Mushkin Blue that was once jinu's; green PCB.

does 2-2-2-5 210mhz for me, VDIMM = 3.3v line mod.. but my 3.3v line is being read as 3.1v in Corecenter. I'm thinking a sense mod and with 3.4v the UTT-CH ought take off a tad :p

[largon]

No more UTT on Mushkin Blue

[onewingedangel]

I rma'd my utt based mushkin blues which were not at all stable at any speeds/timings and got back what i believe to be promos based ones back - now running at 2.5-3-3-6 at ddr 466, so not very good, but at least this pair works.

[Dillusion]

Yes the new mushkin blue lines on the black PCB use hynix chips. I called mushkin to confirm.

I won en ebay auction from mushkin direct for 89$ for the Blue line UTT on brainpower green PCB

http://cgi.ebay.com/ws/eBayISAPI.dll...e=STRK:MEWN:IT

Those pics prove they're the BP PCB with UTT chips and i think thats a good price!

[feanor512]

I have 2x512mb Blue Line UTT on my AN7 running at 2-2-2-6 at 220mhz at 3.1v. I need another 512mb for BF2 and Fear. Will the new chips being used for Blue Line handle these timings or up should I get something else?

[JNav89GT]

erm I don't think the new mushkins use hynix!!!!!!
I was told they were mosel or something like that. I could be off there, but I don't think Mushkin uses any Hynix parts. Someone correct me if I am wrong pls.

feanor512, I don't think the new chips would work well for you. At least not at the timings and freq your currently running. Sorry!

[feanor512]

feanor512, I don't think the new chips would work well for you. At least not at the timings and freq your currently running. Sorry!

Do you know of any 512mb sticks that would work w/ those settings that aren't too expensive (under $100 or so)?

[SeekerX]

So I see some Mushkin Blue Dual Channel 1GB PC3200 to sell, and announcing "the new kit from mushkin 1GB with Winbond UTT!!"

Well, I bought this kit .... but this is where my problem start, how can I tell that I really have a kit with Winbond UTT ?

The info I could see with the Ramsinks on:
On the sticker -> 1GB HP3200 2-3-3 / 9914330750-1
On the PCB, by the way is very dark almoust black -> KD6393

Thanks Wink

[Troll]

Are you talking about these Mushkin?

http://www.mushkin.com/doc/products/...ail.asp?ID=193

[largon]

SeekerX,
There's few different ways to identify CH-UTT:

1. Remove the heatspreader -> if the chips are blank, it's UTT
2. Set voltage to 2.5V, timings to 2-3-2-5 and run memtest at DDR400 (no errors)
3. Set voltage to 3.2V, timings to 2-2-2-5 and run memtest at ~DDR460 (no or just few errors)

[Troll]

1: no way
2. + 3. Nice! Thx a lot!

[nodak]

I've got yesterday my 2*512MB mushkin Blueline ram cl 2-3-3-6 and it work at cl1.5-3-2-6 right now @ 2.9V at 205MHz.Hope that I can reach at least 215MHz @3.2V.

[Duonger]

the blues are built with mosel... we have a bunch of the bh-utt and ch-utt modules left inhouse so you can call in and talk to our CS if you really need it.

Duonger

[nodak]

could U tekl me what chips are on my blue mushkin sticks?they are 991433 s.
What Mosel chips?

[Duonger]

they are mosel chips.

[nodak]

ok.So then on my rams are used V54C365164VD mosel chips.Those are rated to 225MHz @ cl2.5 and max safe voltage is 3.3V.Is it correct?