hehe darn CPU torturerOriginally Posted by Dumo
hehe darn CPU torturerOriginally Posted by Dumo
lots and lots of cores and lots and lots of tuners,HTPC's boards,cases,HDD's,vga's,DDR1&2&3 etc etc all powered by Corsair PSU's
best can do for superpi 1m is 2918mhz at 1.73v (yes still using mem divider while i test the max of cpu by itself)
---
Did anyone try this cpu with the stock HSF or XP 120??? How high did it o/ced?
It is hotter than winnies... right?
only tried on Corsair Hydrocool 200 water
so far
---
max pifast and superpi 1M able
---
i think that you can better right there... try to tweek the timings with the A64 tweeker!
suggestions i doubt i can get a64tweaker any tighter
---
look at this.... it's higher but take a look at the timings... what is your mem?
well 1GB of ram will be faster for 16M and 32M than 512MB total ram
i'm using 2x 256MB KHX3200K2/512 BH-5
Last edited by eva2000; 03-12-2005 at 10:19 AM.
---
Originally Posted by eva2000
eva a friend of mine got one of these local 324USD, there was 2 of them with your exact week/steeping.. im gonna try to get it after he tests his pending his does as good as yours..
eva have you tested any 3d? im sure its stable, but im curious.
These seem like awesome chips. there alot of money tho. but just under 3ghz for 300bucks seems worth the pennies.
i have the same stepping as eva
CAA2C 0505 APMW
using my shuttle sff xpc with normal room temp air.
set @1.65v, reading 1.63v in cpu-z and bios.
the highest clock I can achieve is 2786mhz, which will run superpi 1M
new benching rig
mobo: dfi ultra-d rev. AD0
cpu: x2 3800+ @ 3.30 ghz
cooling: VapoLi SS by jinu117
stepping: LDBHE 0601 TPMW
mem: khx pc3200 1gig bh5's
psu: zippy emac 700watts
gfx: evga 7800gt @ 650/1355
hd: 36gb raptor + seagate 120gb
single 7800gt 3dmark05 WR!
3dmark05 - 10814
I have done as you directed and ordered one from ZZF. Let's hope it OCs better than my winnie(2.7ghz) and my FX-53(2.55). I broke my winnies mem controller, so I have to run a 5:4 mem divider in order to get 2.5ghz on my CPU. Oops.Originally Posted by HiJon89
EVGA P55 SLI, Xeon X3440 w/TRUE 120 Extreme, 4gb G.SKill Ripjaws DDR3-1600, Diamond Radeon 5870 w/T-Rad2/VRM-R3, 30gb OCZ Vertex SSD, 2x500gb Western Digital HDDs (RAID 0), CM HAF 932, Antec Truepower New 750w, Dell ST2410 24" monitor, Razer Diamondback 3g, Tarantuala, eXactmat,
Laptop: Gateway P-7811FX
You broke your mem controller? How the h*ll did you do that?Originally Posted by GregP24
@Eva200: Very nice scores you've got there!
It's better to keep your mouth shut and give the impression that you're stupid than to open it and remove all doubt." -Rami Belson | Specs!
High vdimm. Winnie mem controllers are pretty weak.Originally Posted by A_X
EVGA P55 SLI, Xeon X3440 w/TRUE 120 Extreme, 4gb G.SKill Ripjaws DDR3-1600, Diamond Radeon 5870 w/T-Rad2/VRM-R3, 30gb OCZ Vertex SSD, 2x500gb Western Digital HDDs (RAID 0), CM HAF 932, Antec Truepower New 750w, Dell ST2410 24" monitor, Razer Diamondback 3g, Tarantuala, eXactmat,
Laptop: Gateway P-7811FX
could of sworn i posted my 3dmark2001 score heh but here
---
I just ordered a Winchester from ZZF, saw this thread and cancelled.
Ordered the ADA3500ASBOX 80717-1.
I sure hope the ppl that opened the boxes of CPUs, labled the right parts 80717-1.
How many versions of the same CPU will AMD have? Wow.
Someone tell me I did the right thing......
u did the right thingOriginally Posted by RacerX27
Good to hear!Originally Posted by |3ourne
If I get 2600mhz I'll be happy....I was going to get a 4200+, but if this CPU works out, I won't go that route. 2675-2700 would make up for the lower cache anyways.
wow, I'm trying to exchange my 3200+ winnie I am rmaing to newegg for the ADA3500ASBOX, I hope they will do it, and not charge a restocking fee or something. That would be awsome to get a 4000+ for the price of a 3500+
E8400 @ 3600mhz
4870 @ 790/1100
2x2GB DDR2
with this cpu 'm using the 550W GTR psu and strange thing is
11x 260HTT with DDR400 or DDR333 divider
at 1.65v
will pass 3dmark2001
freezes in 1st test of 3dmark2003
will pass 3dmark05
at 1.6v
will pass 3dmark2001
freezes further into 1st test of 3dmark2003
will pass 3dmark05
at
11x 255-257HTT DDR400/333 divider all 3dmark2001, 3dmark2003 and 3dmark05 pass at 1.6-1.64v
hooked up multimeter to 12V rail on psu and when it passes all tests in 3dmark2003, my 12V rail reads between 12.34-12.44v
when it freezes in 1st test of 3dmark2003, 12V rail reads 12.29v (which would be still ok ?)
could be limit of psu ? or cpu ?
---
seems past 2805mhz i freeze in 3dmark hmmm
but using 5.3 cats for first time seem pretty good
Powercolor X800XT PE stock heatsink no additional cooling
stock cpu speed
oc'd cpu speed
---
get this and sell it for what you paid when venice is out, thats what I plan to do
E8400 @ 3600mhz
4870 @ 790/1100
2x2GB DDR2
Bookmarks