Originally Posted by kakaroto
If I try to run preamble latency at anything other than 5 I can't POST. Is this common for week 31 TCCD LE's?
Originally Posted by kakaroto
If I try to run preamble latency at anything other than 5 I can't POST. Is this common for week 31 TCCD LE's?
Last edited by Zedex; 03-16-2005 at 11:10 PM.
Winchester 3000+ (CBBHD 0448 SPAW) @ 2.6GHz 1.440 VCore
DFI LP NF4 SLI-DR
GSkill LE 2x512MB @ 290MHz 2.5-4-3-7 3.0VDIMM
ATI Radeon X800XT @ 540/510
PCP&C 510 Deluxe SLI
All Stock cooling
Saitek Gaming Keyboard + Razor Diamondback Mouse
Hello everyOne !
I got my G-skill LA (440) 2x512 from Newegg.com, and I try to test thoses sticks with Memtest86+ on
Athlon64 3500+ 0.13µ (CPU ratio set to x8, or x9)
Epox 9NDA3+ Nforce3 Ultra
When I test one stick at the time,(in single-chanel) then I can hit 300Mhz 1T cas 2.5-4-4-8 noproblemo ! freeError in Memtest86+ V1.51
But when I tried to run both sticks together (in Dual-chanel) then I get a thousand of errors after 2 or 3 minutes runing Memtest86+ even I tried 1T or 2T I still have alot of errors, so I seted down to 290Mhz, 275Mhz, 265Mhz, or even at 250Mhz 2.5-3-3-6 still get errors, what's wrong ? is my Gskill sticks is nogood in Dual-chanel, or something else ? someOne can help me out with this problem ? what can I do to get it run in Dual-chanel
For very-soon !!!
AMD Athlon64 3700+Sandy (Shipped & should get it in few days !)
DFI Sli-DR Nforce4
2x: 6800Ultra-Extends Performance 512Mb SLI. or X950XT ? (wait for availability)
[COLOR=Green]G-skill GBLA DDR:600 (stepping:440)
Promise FastTrack S150 SX4 (RAID-Controller) Raid5
WD-Raptors 4x36Go=144Go (10k-rpm) RAID-5 & 0
VapochillSE & Water-Cooling
ok, got my gskill LE's today, bad news, 1 stick has bad memory address, cannot even boot up windows past 200 fsb with 1 stick. if I try to oc it past 230, I get a blue screen, (and the computer restarts when it does boot up to windows) the other stick boots up fine at 200 - 230, past that, it simply just does not work anymore. Both sticks together just would not boot up, period, this is due to the stick with the bad address that blue screens. This is on a known and tested rig which can do 260 fsb at 2 2 2 timings with no memtest errors, I can also hit 275-300 if I use lower multi's with 1 stick, so I know it's not my system. I didn't even run memtest as it would be a waste of time. Help me out here OPB, I simply need a dual channel set that will perform as advertised in dual channel. I feel like I got the sticks that newegg got for rma's or somthing, cause if these are new sticks.... well... I'm very dissapointed. I had very high hopes. Btw, I tried 2.5 4 4 8 and 2.5 3 3 8, it didn't matter which timings I tried, also, the spd timings where 2.5 4 4 8 in the bios, I guess I got some sticks that were supposed to be LA or somthing? maybe someone just rma'd them and stuck the stickers on them when they sent them back, heh, I don't know...But this rig is going to be a show rig and display rig, it has to be able to run. I DON'T want to rma back to newegg, I fear I'll get the same thing again. $280 down the drain..Help me out? thanks.
ALIENS are bringing my next kentsfield based rig in a UFO case!
well, it appears it wasn't the memory, the system did the same with 3 different pairs. and all the other pairs, and this gskill run like a champ in my Athlon xp rig....Originally Posted by Skip
bad dfi ultra-d. gskill rocks!
Biostar A780 mATX
AMD Phenom II x2 (Unlocked to x4) Stock Clock/Heatsink
ATI X850XTPE Stock
OCZ 2x2GB DDR2-800
Seagate 320GB 16MB Cache Sata 3.0
heatware: skip86
No one can tell me what can I do ? to be able to run mine LA in dual-chanelOriginally Posted by AMDfan
For very-soon !!!
AMD Athlon64 3700+Sandy (Shipped & should get it in few days !)
DFI Sli-DR Nforce4
2x: 6800Ultra-Extends Performance 512Mb SLI. or X950XT ? (wait for availability)
[COLOR=Green]G-skill GBLA DDR:600 (stepping:440)
Promise FastTrack S150 SX4 (RAID-Controller) Raid5
WD-Raptors 4x36Go=144Go (10k-rpm) RAID-5 & 0
VapochillSE & Water-Cooling
big thanks kevin for exchanging my bad LE stick. thanks also for handpicking a new set that does 600 @ 2.5 3 3 6. system is running faster than ever....
cheers
NFI Lanparty SLI-DR -- 4000+ @ 2977mhz 1.65V -- 2 x BFG 6800 Ultra -- 1 gb bh-5 -- WD Raptor 74gb, 200gb Seagate, 120gb WD -- LG DVD Burner -- Swiftec Water Cooling -- Lian-li PC71 -- Audigy 2 -- Dell 2405 LCD
Hello
Here I have some problems with my 1 gb of GBLA.
I can't drive them up to DDR 600 with 2.5 3 3 7 at any voltage, and so 2.5 4 3 5 is not that better.
My adata PC 4500 were doing much better.
Rig
Mobo : DFI NF4 Ultra D rev 2.0 : 310 beta 2
CPU : Winnie 3000+
Ram : 2x512 Gskill GBLA
Settings
VDDR a 2.9v
http://verybadman.free.fr/overclocki...ings/25336.jpg
I've tried Idle Cycle limit a 256 and twtr a 3 : no way
If you have ane idea please help me
ECK
Don't using to much Vddr. Try 2.7~2.8v and see if the errors drop.Originally Posted by EclectiK
EclectiK
Memory controller? Maybe one of you GSkill guys shows write up a FAQ on how to identify mem. controller problems.
i5 750 4.20GHz @ NH-D14 | 8GB | P7P55DLE | 8800U | Indilinx SSD + Samsung F3 | HAF922 + CM750W
Past: Q6600 @ 3.60 E6400 @ 3.60 | E6300 @ 3.40 | O165 @ 2.90 | X2 4400+ @ 2.80 | X2 3800+ @ 2.70 | VE 3200+ @ 2.80 | WI 3200+ @ 2.75 | WI 3000+ no IHS @ 2.72 | TBB 1700+ @ 2.60 | XP-M 2500+ @ 2.63 | NC 2800+ @ 2.40 | AB 1.60GHz @ 2.60Originally Posted by CompGeek
Well I'll try with that vddr, I'll let you know.Originally Posted by kakaroto
@Ivan : I don't think it come from the mem controller. I'll try with a venice in a few days then we'll know...
Thx for support.
ECK
Um the gskill is picky in the an8 however i have found the sweetspot timings that work on it if anyone wants the timings feel free to PM meOriginally Posted by clockedOut
heatware chew*
I've got no strings to hold me down.
To make me fret, or make me frown.
I had strings but now I'm free.
There are no strings on me
Finaly got my new set in mail today! All seems to well! (TCCD 440 LE), except for the fact that my Neo4 won't run DC anymore all of a sudden... But that's a different issue I suppose. Ram is okay!
It's better to keep your mouth shut and give the impression that you're stupid than to open it and remove all doubt." -Rami Belson | Specs!
OPB, you've got PM. I hope you still read this thread. I really need RMA if you get my PM. Thanks...
Asus Rampage II Gene, Xeon W3550 D0 Mushkin PC3-2000 6GB, BFG 9600GT OC 512MB DDR3
Asus A8N32-SLI Deluxe 1.01G, AMD A64 4000+, 2x1GB Ultra PC-3200, EVGA 7600GT 256MB DDR3
Asus MA378-T with AMD Athlon 64 X2 7850
ECS 945GCT-M/1333 v3.0, Intel Celeron E1400, MSI 8500GT 256MB DDR3
BIOStar P4M900-M7 Rev. 7.0, Intel Celeron 440, 1GB Kingston, 6600LE
Gigabyte M61PME-S2P with AMD Athlon 64 LE-1660, EVGA 8500GT 1GB DDR2
I have had some issues with my 4400 le They recently quit running anything above 268 fsb on my 3000 winchester. They were prime stable at 310x8 and now they will do nothing above 268 at any multiplier.Tried a 3200 winchester same issue, Tried a new 3700 and still no go above 268 fsbat any multiplier This is where i run day to day. Not really sure what happened to them but anything above 268 is a no go on all 3 processors.I would think that this eliminates the CPU as part of the issue. Any help would be appreciated.
Last edited by ccokeman; 08-03-2005 at 08:18 PM.
Core i7 920 @
MSI X58 Eclipse SLI
6GB Mushkin Blackline
GTX295
Have you double check the bios, maybe you changed some important settings. Have you tested both modules at running 275MHz 2.5-3-3-7 and do they both fail? In many cases only one is defective, this will inflict both modules in dual channel.Originally Posted by ccokeman
Been through the bios a million times and have checked my settings against the form that i use to keep all of my settings down so that i dont miss anything, Will check again though. . I'll try testing one at a time to see if that makes any difference.
Update* 1 will do 272x9 1 will do 302x9 both well under the CPU's capabilities. It maxes out at 2.85ghz. Testing prime95 on the Good mudule at 302.
Last edited by ccokeman; 08-04-2005 at 08:58 PM.
Core i7 920 @
MSI X58 Eclipse SLI
6GB Mushkin Blackline
GTX295
passed prime 95 at 302x9 for 16 hrs on priority 10. Looks as though 1 is a little shifty. Still no go if i try and run them any higher than 268 fsb together. Tried the yellow slots just to see if it made any difference(none).
Core i7 920 @
MSI X58 Eclipse SLI
6GB Mushkin Blackline
GTX295
DamienKC, now whilst I am no guru at memory, if you're running a DFI NF3 board, the fault could be there. I saw several people who for the love of god could not get dual channel to work in the combination with a DFI NF3 board.
In short, both AMD and NVIDIA discovered that their next-generation graphics cards are superior to each others' last-generation graphics cards.
I can't get my GBFF kit stable at 270MHz... 2.5-3-3-7... at 2.6v it won't boot, at 2.7v I get BSOD while booting, at 2.8v I get those "page errors" and at 2.9v only SuperPi isn't stable. Any clue ?
Comp 1 : NCASE M1, Asus Z170I PRO Gaming, Intel i7-6700K, G.Skill 2x4Gb 3466MHz, Samsung 950 Pro (512), Samsung 840 Pro (256), WD Red (5TB), Asus nVidia GTX 980 4Gb, Silverstone SX600-G, LG 34UM95
Comp 2 : Commodore Amiga 4000D, Cyberstorm MK2 68060 50Mhz 128Mb, Cybervision 64 4Mb, FastATA MK-VI, Indivision AGA MK2cr
Comp 3 : Commodore Amiga 600, Vampire 600 V2 128Mb, Indivision ECS, 32Gb CF
G-skill LA runs better on 754 than 939 ?????
need help please
- i7 920
- DFI DK X58-T3eH6
- G.SKILL PI Black DDR3 PC 12800 CL8 6GB kit (F3-12800CL8T-6GBPI-B)
- Crossfire 2x ATI HD4670 GPU 785 Ram 1060
- Thermaltake Toughpower 1200w
- Cooling: Water - EK Supreme
- Lian Li V2000B+
24/7 OC 4Ghz 20x200 x8 1600Mhz 8-8-8-21
Official Gigabyte X48T-DQ6 Info Thread
DFI DK X58-T3eH6 on Test
Tuko, did you set exactly same parameters as you post the a64tweaker here under bios? if so, as my experience, you won't boot in windows.
Please check here: http://www.xtremesystems.org/forums/...ad.php?t=71904
supershank,I check the problem you post on the gskill forum, not really sure what your
problem is, PM me if you need further help.
I had problems with my Gskill PC3200 UTT chips and MSI k8n neo2.
It wouldt boot with two sticks but one stick - fine.
i just bought gskill fx n oc'ed it till 290.. window memtest 200% coverage pass, super pi 1M & 8M pass.. but fail in 32M... is it ok tu use?
MSI K8N Neo4-F
Venice 3000+ @ 2.61GHz
Vdimm 2.65v
Vcore 1.55v
Bookmarks