boots up, I go into BIOS, make sure temps are ok (33C), and set all my stuff up (2.9VDIMM, no floppy, fast writes off, cd first boot, all the usual stuff) and save and exit and it boots to a blank screen. I restarted it twice and than reset CMOS and still nothing. No beeps or anything. Wtf?
EDIT:cleared CMOS, rebooted a few times, and got to a no floppy error halt screen, restarted again and got no POST.
EDIT:
if I leave it default everything works fine. Wtf... I'm installing windows now...
Last edited by afireinside; 02-21-2005 at 12:17 PM.
Flash your bios, you're probably using one of the originals that had issues with mobiles/dtr's.
Make sure you manually set the vcore and do NOT leave it on auto.. or it will default to a real low vcore..
Got windows installed and everything is working fine. 40C idle on water sounds a bit high... than again I dont have a shroud and the fan is mounted stood off so the radiator cooling probley blows. How tight can I make the MCW6002 on an IHSless chip?
3dmark time
Yeah I need to make it tighter. Water after block is 20C. A 20C delta-T at stock doesent sound right...
The DFI UT 250gb measures temps by holding it's hand on the heatsink and then it guesses what the temp is, don't give it any credibility.
E8400 @ 3600mhz
4870 @ 790/1100
2x2GB DDR2
Alright... My friend was having a problem to... So as long as its stable I wont worry... The smart guardian thing is way off for everything else to.
On another note my 6800nu unlocked fine
great I installed the 4Vdimm BIOS and now it hangs in the BIOS and booting windows. Kick arse!
reset cmos, then try
E8400 @ 3600mhz
4870 @ 790/1100
2x2GB DDR2
boots fine now. thanks. Trying to get 3dmark to run 2.5ghz at 1.65V now... clock gen crashed after I set 2.5 but so far so good
Last edited by afireinside; 02-21-2005 at 02:29 PM.
afireinside, I see you got your DTR? Did you go the 3000+ route? What stepping did you get? Good luck, I finally got mine to bench stable at 2.8ghz. Took lots of testing though to figure out what the cpu liked. I had to loosen up my memory using the 166mhz divider though, so performance wise it is not really much faster than it at 2700mhz with the 180mhz divider.
System 1: i5-2500k (4.9 ghz), Thermalright Silver Arrow, Asus P8Z68-V, 8GB Gskill Ripjaw, Sapphire HD7950 OC (1200/1750), 1TB Samsung F3, Crucial M4 128GB & 64GB, Lepa G900-MA, X-FI Titanium, CM Storm Sniper, HP ZR30w + ZR24w
HTPC: i5-2500k (4.2Ghz), MSI Z68MA-G45, 8GB Gskill Ripjaw, Sapphire HD7850 (1150/1425), Kingston HyperX 240GB, 1TB Samsung F3, Ceton InfiniTV 4, XFX Black 650w, Denon AVR-1910, Silverstone GD04B, Panasonic 55" ST30
WHS: Athlon II X3 435, MSI 785GTM-E45, 4GB OCZ Gold, 2x1.5TB Samsung F2, 2TB Samsung F4, 1TB Hitachi, CoolerMaster 341Elite, Antec Neo-Eco 520w
im gettin the one soon too, is that 2.8 on air??Originally Posted by jhatfie
watcha think it will do with direct die?
can you see the light? is it shining too bright? can you see the light at the end of the tunnel, i know i do, i know its true.
I got the same stepping as you. 0501 CAAZC or whatever. My mobo sucks tho... Maxes at 2.6 because of it.
Posting Permissions
Reply With Quote
