NF3/NF4 & TCCD - Highest stable clocks - REPORT IN !!!

**SainT** · 05-01-2005, 01:32 PM

Originally Posted by bachus_anonym

Sorry, bro

Not interested in 8M calculations here. 32M stability is much harder to achieve than 8M, and that's the whole point

Run 32M please, and I'll be more than happy to add your entry to the list

oke bro

i'll do it 32m when i am free

**arctic-k20** · 05-06-2005, 09:26 AM

here is my new ocz 4200el plat chugging along so far.... i think if my memory controller was just a little bit stronger i could have gotten 2.5-3-3-x but I just couldnt get 32m stable with trcd-3...

**bachus_anonym** · 05-06-2005, 10:05 AM

Originally Posted by arctic-k20

here is my new ocz 4200el plat chugging along so far.... i think if my memory controller was just a little bit stronger i could have gotten 2.5-3-3-x but I just couldnt get 32m stable with trcd-3...

Added... Thanx a lot

**gundamit** · 05-07-2005, 12:21 AM

Originally Posted by arctic-k20

here is my new ocz 4200el plat chugging along so far.... i think if my memory controller was just a little bit stronger i could have gotten 2.5-3-3-x but I just couldnt get 32m stable with trcd-3...

Glad to see your long VX/bios/memory controller nightmare is over. They'll run cool and provide plenty of bandwidth and a lot less grief.

**arctic-k20** · 05-07-2005, 12:35 AM

thanks gundamit......im glad as well....its nice to be able to turn off the computer and know it will turn back on every time now

**crespo80** · 05-09-2005, 01:27 PM

this is 7+ hours goldmemory 6.64 stable (and prime95 of course) and is my daily use...

290MHz 2,5-4-3-5 1T only 2.6v with no active cooling on ram

**FlyingHamster** · 05-09-2005, 06:38 PM

what kind of ram?

**crespo80** · 05-09-2005, 10:19 PM

Originally Posted by FlyingHamster

what kind of ram?

it's written in the sandra screenshot:
centon advanced (very very good ram)

EDIT:
chip Samsung TCCD-507
pcb Brain Power 808

but this goal was achieved by setting all the parameters in BIOS and testing them with the hardest memory test program, goldmemory 6.64.
If i clock in Win with clockgen and test only with superpi 32mb, i can achieve higher frequencies...
later i'll try with active cooling on ram (a simple fan), because now this is the limit, they aren't 100% stable even if i raise freq by only 2Mhz...
and increasing voltage to 2,7v has no effect, resulting in little worse results

**bachus_anonym** · 05-09-2005, 10:24 PM

What's the board? DFI Ultra-D or SLi? Or something else?

Yes, GoldMemory 6.64 is a really nice tester, seems much better than Memtest1.55 and on par with "Memtest for Windows"

Also, is that Centon PC3200 Gemini LL ???

**CTKP** · 05-09-2005, 10:47 PM

3700+ San Diego
DFI NF4 Ultra
OCZ 3200EL Platinum Rev.2 at 2.7v
Powerstream 600

Will try to get a 9x305 SPi 32m, still working with this SD.

**crespo80** · 05-10-2005, 02:59 AM

Originally Posted by bachus_anonym

What's the board? DFI Ultra-D or SLi? Or something else?

Yes, GoldMemory 6.64 is a really nice tester, seems much better than Memtest1.55 and on par with "Memtest for Windows"

Also, is that Centon PC3200 Gemini LL ???

the board is a DFI NF4 SLI-DR, now i have my config in sign

the centon stick are "OEM", not sold in pair, I brought them from computersma of this forum.
They have Samsung TCCD-507 chips and Brain Power 808 pcb

I made several tests with practically all of the parameters in the BIOS, to find best settings for my ram. At a first time I worked so:
change a single parameter in BIOS and test with 10 runs of memtest #5
look how many errors it reports and choose the option with less errors
But when i repeated the tests with the same identical BIOS settings I obtained very different results (like 200errors VS 100 with same settings!!!), so I left memtest ang gone for goldemmory.
With this tester i obtained very precise results, and if I repeat twice a test with the same BIOS settings, the max difference, in terms of errors, is for example 205 VS 200.

So, for every single parameter in BIOS I made a full goldmemory pass (about 35min) and choosed the option with less errors.

Some settings now are different from the screen i posted (like the tRAS from 5 to 7 and the tREF from 3072 to 2048)

At a first moment i followed the guide from KAKAKOTO and ONEPAGEBOOK but then i went on my own

**omga14** · 05-10-2005, 06:37 AM

219x12 on some old ch-5. can do 235mhz with the same timings but the cpu doesn't seem to like it right now. still doing some tweaking. hope to be back with air cooled 2.7ghz+. here's the screenie.

**omga14** · 05-10-2005, 06:40 AM

this was with a DFI UT 250gb and a 3400+(NC) week 0503

**uranium** · 05-10-2005, 11:58 AM

Here's my GSkill LE at 300. Not 2.5 3 3 7 unfortunately, but other timings are quite tight. Also stable to memtest for Windows for 8 hours (at which point I decided it was stable

)

**CTKP** · 05-10-2005, 01:01 PM

Originally Posted by omga14

this was with a DFI UT 250gb and a 3400+(NC) week 0503

Uh, this is for TCCD only

**bachus_anonym** · 05-10-2005, 01:36 PM

@crespo, CTKP and uranium

Thanks guys

Listing updated!

Also, CTKP to be the first one here to add his San Diego to the list :thumbsup:

@omga14,

yeah, sorry bro! at the moment we're gathering info on TCCD OCs only

but, maybe it's time to start another thread then... Hmmm

**TheMeatFrog** · 05-10-2005, 08:04 PM

DDR632 9x316...32M may be a little slow cause I was surfing the web while it was running

Forgot to bring up voltages for the first screen shot

SuperPI 1M just for kicks

**bachus_anonym** · 05-10-2005, 11:12 PM

@Rubescen

I just added your 32M that I found here.
I was looking for some good TCCD clocks and tripped over your post. I hope you don't mind. If you get a better one then just post it here, please

**hangLewZ** · 05-13-2005, 08:10 AM

Anyone tried these? Are they tccd?

Check em out http://www.ocztechnology.com/product...fi_nf4_special

**THunDA** · 05-13-2005, 08:18 AM

Originally Posted by hangLewZ

Anyone tried these? Are they tccd?

Check em out http://www.ocztechnology.com/product...fi_nf4_special

Yup..TCCD

**EMC2** · 05-13-2005, 09:48 PM

Originally Posted by Bachus's "title"

Xtreme Pi Freak

Sorry, couldn't resist...first time I noticed that little funny

In honor of your "title", may have something for ya this weekend bro

**bachus_anonym** · 05-13-2005, 09:56 PM

Yeah! Since I have started to be known for bugging everyone I can for 16M/32M Pi, I bet they whisper that behind my back

You got some TCCD results for me? Sweet! Don't forget about BH-5/BH-6/UTT thread too, while you're on it

You've been stockpiling those SpeedPremiums and Blues for quite a while now

**justwOo** · 05-14-2005, 02:08 AM

I get my OCZ 3200 Plat Rev2's on monday, i'll definetly let you know how it goes

**dippyskoodlez** · 05-14-2005, 04:17 AM

Getting more TCCD in an hour. Along with a venice to play with. Results then

**eraser** · 05-14-2005, 07:06 AM

TwinmosTwisterPro3200 TCCD 2x512mb

This is max SuperPi 32m stable Cpu Overclock with my 0437 winchester:

300mhz 2.5-3-3-7-1T is memtest & 3dstable but not SPi 32m.

Thread: NF3/NF4 & TCCD - Highest stable clocks - REPORT IN !!!

Thread Tools

Search Thread

Rate This Thread

Display

OCZ EL DDR PC-5000 Dual Channel Platinum DFI nF4 Special

Bookmarks

Bookmarks

Posting Permissions