NF3/NF4 & TCCD - Highest stable clocks - REPORT IN !!!

[ausasua]

geil ultraX pc3200 256*2 and neo2

2.5-3-3-6 1T 8x cpu multi. I forgot clockgen :p

[Skip]

i didn't use clockgen for this, this is straight bootup and run superpi32M. i didn't do any tweaking with A64 tweaker, but just showed it for the timings and whatnot.

this is just about the absolute max for my memory, it took me 4 superpi runs and failures and going back into the bios and changing stuff to finally get the right settings. certain things i can tighten, like TRC and TRFC i have some room to move, but basically i am at the max voltage that is still helping, and i doubt i can do anything with bypass max and max async latency.

[GRAFiZ]

bachus_anonym, here's the SuperPi 32m results:



It cut off the bottom but the numbers are, 29m 02s.

I only wish I had a better CPU, 2.5ghz is the MAX this thing will do prime stable. I can bench some at 2.6ghz, but it's not stable overall.

I sure hope those Venice cores do well when they finally come out.

[bachus_anonym]

geil ultraX pc3200 256*2 and neo2

i didn't use clockgen for this, this is straight bootup and run superpi32M. i didn't do any tweaking with A64 tweaker, but just showed it for the timings and whatnot.

this is just about the absolute max for my memory, it took me 4 superpi runs and failures and going back into the bios and changing stuff to finally get the right settings. certain things i can tighten, like TRC and TRFC i have some room to move, but basically i am at the max voltage that is still helping, and i doubt i can do anything with bypass max and max async latency.

bachus_anonym, here's the SuperPi 32m results:

It cut off the bottom but the numbers are, 29m 02s.

I only wish I had a better CPU, 2.5ghz is the MAX this thing will do prime stable. I can bench some at 2.6ghz, but it's not stable overall.

I sure hope those Venice cores do well when they finally come out.

Thanx a lot guys, I really appreciate that you decided to participate in it
I strongly encourage anyone that sees this thread and has some TTCD mems to show us what they got... Just don't forget, SuperPi 32M or bust

I think I might start gathering all that info in my initial post....

[THunDA]

Here is my 24-7 overclock.. Its also 10 hours prime stable and maybe longer but I dont prime for more then 8-10 hours since thats usually ok for me ..

The cpu maxes out at 2.75mhz with the same vcore but I run it here because to get the ram higher I need to loosen the timings which dont make it worth it..

Full specs are in sig..

[quicksilverXP]

Ok... Here's a shot of 32m Superpi, but, I forgot to scroll down to show the time at the end!... but it shows that it completed though. Here's the pic.

[HARDCORECLOCKER]

Shown here.......

[bachus_anonym]

@THunDA & quicksilverXP

Thanx a lot guys... Those Centon sticks are doing really nice... :thumbsup:

@HARDCORECLOCKER,

aren't you forgetting something, like SuperPi 32M run or I missed something in this thread, again...?

[Orker]

Great idea for thread...

My highest stable is

2.5-3-3-7 2.9v @250mhz
A64 3500+ @ 3500mhz 1.55v

Ocz Rev2 2x512

Its prime stable BUT it takes like 1hr to past 1 test in prime .. what would that mean?

ill post pics later....

[pik-ard v1.1]

Great idea for thread...

My highest stable is

2.5-3-3-7 2.9v @250mhz
A64 3500+ @ 3500mhz 1.55v

Ocz Rev2 2x512

Its prime stable BUT it takes like 1hr to past 1 test in prime .. what would that mean?

ill post pics later....

you mean 2500mhz, right? not sure bout the prime stuff, what settings are you choosing though?

[Orker]

you mean 2500mhz, right? not sure bout the prime stuff, what settings are you choosing though?

yeh 2500mhz

torture test... blend ram and cpu

[funkdog]

Right now it's 310x8 at 2.5,4,4,7 2.8vdimm 1.45vcore.

0451 3000 winnie
PDP XBL 2x256

Hoping to get 320-325 at 2.5,4,4,8ish

[yotomeczek]

Gskill @ 3,25V
DFI NF4

[Napoleonic]

I want to ask, tccd @275 2.5-4-4-7-1T @2.75volt is good or not? or just average? thx

[endo]

HEY....GUYS...
just try it a64 3000+ winchester with asus mobo socket 939 with sli and with value price..
but..wow...extra power man...!!!

[bachus_anonym]

@Orker, funkdog, Napoleonic and endo...

Guys, I would really appreciate if you stay on topic... No SuperPI 32M run = no post in this thread.
We're not interested in just claims that one runs at particular speed. Screenoshot of 32M run is what we're looking for. Otherwise, don't post here...

@Yotomeczek,

How about some SuperPi 32M action for us? Got any, please ?

[wampir]

Damn always this 32M , I like XS more than tweak.pl cause here nobody asks about spi 16M or 32 .......... except You

I know ....rules

[tictac]

nickname : forumer (not mine )
ABIT AN8 Fata1lty
OCZ EL
Super pi 32M = 28min 2sec

Super pi 1m = 31sec


Super pi 32mn = 28min 2 sec

[/img]

[winston]

Here's my 32Mb run as you requested fella

http://img.photobucket.com/albums/v1...ton69/32mb.jpg

[bachus_anonym]

Here's my 32Mb run as you requested fella

http://img.photobucket.com/albums/v1...ton69/32mb.jpg

Nice! 375x8 DDR600 11-3-4-2.5-1T, I assume ? DFI Ultra-D ? What mems, winston ?

EDIT: Nevermind, I got it "DFI NF4 SLI-D / Corsair 4400XMS"

[winston]

Nice! 375x8 DDR600 11-3-4-2.5-1T, I assume ? DFI Ultra-D ? What mems, winston ?

EDIT: Nevermind, I got it "DFI NF4 SLI-D / Corsair 4400XMS"

...

[khellandros66]

GSkill PC4800 F1-3200DSU2-1GBLA
Asus K8Ne-Deluxe rev1.04
Sempron 3100+
290Mhz 1:1 2.5-4-4-8 2T

I will try it in the Chaintech rig asap.

~Bob

[funkdog]

ok, school me on how to add pics.

I've upload a jpeg of the screenie to my comcast website, but it's too small to really see.

sorry I'm a bit of a noob when it comes to editing photos and such.

[funkdog]

if you can read it, this is at what I like to run.

290x9 with 1.5v on the core. nice easy temps.

http://images.snapfish.com/342%3C%3A...65392%3Anu0mrj

using gimp for windows, but I can't seem to make the image large enough to read. Sorry.

[gundamit]

OC with OCZ Plat. Rev 9/10 divider not picked up by CPUZ

BH-5 Testing