Evaporator Gallery

**JSU** · 02-03-2005, 11:30 AM

(the post i was responding to seams to have disapeared)

its easier to distinguis and the server doesnt allow that many pic in one post

**JSU** · 02-03-2005, 11:31 AM

wowsers nice

**gclg2000** · 02-03-2005, 11:37 AM

Ok's here my most recent one.

**kayl** · 02-03-2005, 04:13 PM

sticky
that is the best post of evaps i have seen.

those first few evaps are soo good, i wish cnc maching wasnt so expensive.

**oc_nightmare** · 02-03-2005, 04:26 PM

here is my first one

**pythagoras** · 02-03-2005, 04:34 PM

I agree with a sticky

**shadowing** · 02-03-2005, 05:02 PM

Question. What's the difference between those blocks other than their interior? Are those designs specifically made to optimize cooling?

**Unseen** · 02-04-2005, 12:27 AM

Originally Posted by alexio

Seems like you are going for as much posts as possible, why didn't you put the photo's in one or two posts?

i want the pics to be stored in xs disks. Not in another server.
Plus i can only upload 5pics per post.

**matt9669** · 02-04-2005, 03:03 AM

You've got my vote for a sticky!

These are gorgeous, keep em comin

**eR1k** · 02-04-2005, 03:40 AM

Originally Posted by cold_ice

Here's nikolauzis evap

SWEET!!!!

Great thread!

**Malachia** · 02-04-2005, 09:14 AM

Originally Posted by gclg2000

Ok's here my most recent one.

how it works???

**JSU** · 02-04-2005, 09:21 AM

goes from the bottom up, if you notice the disks arent 100% aligned. That is so the refrigerant can flow through.

**Malachia** · 02-04-2005, 09:23 AM

Originally Posted by JSU

goes from the bottom up, if you notice the disks arent 100% aligned. That is so the refrigerant can flow through.

thx, understand

**reject** · 02-04-2005, 06:16 PM

Hawainpandas block no.1

**Aphex_Tom_9** · 02-04-2005, 06:23 PM

^ not too shabby, just that thin wall scares me...

**gclg2000** · 02-04-2005, 08:13 PM

As long as you don't torch through the wall its fine. When i brazed it shut, it never got even close to burning up...The metal is lieterally touching the insde chambers (within a few thousands of an inch), so the heat just spreads and spreads throughout the whole block. It can withstand plenty of pressure too

Click here and you can see the cap tube inside the tube.

**gkiing** · 02-04-2005, 10:43 PM

Well the walls of copper pipes are only 0.032 thick or something, so I'd imagein it would be fine, but it would be better in copper either way (i think thats brass isint it?).

**reject** · 02-05-2005, 04:06 AM

yes i think its brass
maybe HP can enlighten us?
but chilly1 has tried brass and said that at the temps of DD/ cascade the difference between copper/brass is crap all

**Unknown_road** · 02-05-2005, 07:03 AM

my evap:

**gkiing** · 02-05-2005, 04:28 PM

Nice, looks like you brazed it rock solid.

**reject** · 02-05-2005, 06:21 PM

i think that would work very well :thumbsup:

**Aphex_Tom_9** · 02-05-2005, 06:26 PM

yea that looks good, i like the design. the suction goes to the side opposide the cut in the large channels, right?

**~~BB mods's~~** · 02-06-2005, 12:46 AM

Here is a cpu and a gpu/NB evap iv made,ill try to find better pic's of the finished bGPU/NB block.

**Unknown_road** · 02-06-2005, 05:30 AM

Originally Posted by Aphex_Tom_9

yea that looks good, i like the design. the suction goes to the side opposide the cut in the large channels, right?

I don't know for sure what u mean but I think yes

when you look at the first pic suction is in the middle of the upper channel.

**Tonic** · 02-06-2005, 06:21 AM

Unknown_road's first photo makes me.. grotesque feelings

Very nice braze, you didn't save of braze rods

Are you using propane torch?

Thread: Evaporator Gallery

Thread Tools

Search Thread

Rate This Thread

Display

Bookmarks

Bookmarks

Posting Permissions