Results 1 to 9 of 9

Thread: -40c Temps...What Coolant to Use..Antifreeze? Windshield washer fluid?

  1. #1
    Registered User
    Join Date
    Aug 2004
    Posts
    75

    -40c Temps...What Coolant to Use..Antifreeze? Windshield washer fluid?

    Ok picked up this unit does -40c..
    guy tells me to use Prestone-DeIcer Windshield washer fluid and some Heet.

    Problem is..In Califorina I can't find Prestone-DeIcer...soooooooooooo

    What do I use in this system..Pure AntiFreeze will stop the temps from getting to their lowest point.

    Anyone have any suggestion on what I should Use?..Aprox Ratio..etc

    Thanks everyone..I have been looking everywhere for a answer to this question.

  2. #2
    XS - Extra Strong
    Join Date
    Aug 2003
    Location
    Toronto, Canada
    Posts
    2,070
    I'd run methanol alchohol mixed with a little bit of antifreeze to prevent corrosion. You could also use isopropynol (rubbing alcohol). Flamability is a concern, but as long as you take the nessacary precautions its no reason not to use alcohol.
    -Phenom2 x6 1055 @stock
    -8gb ddr3
    -Gigabyte UD3
    -Geforce 7900Gt 755/1863 1.562v vgpu
    -OCZ Powersupply 600w

  3. #3
    Xtreme Member
    Join Date
    Jan 2004
    Location
    Halifax, Nova Scotia
    Posts
    209
    anit freeze isn't good at those low temps. if you use only an antifreeze and watermixture, it will form chuncks of ice and become like a slushy after some time

  4. #4
    Skulltrail Addict - XIP
    Join Date
    Nov 2004
    Location
    France
    Posts
    910
    methanol is really toxic, so you should have a closed tank to prevent it from evaporating in your room

    I use a mix of antifreeze rated to -35°C and isopropyl alcohol, at -40°C there's no ice

  5. #5
    Registered User
    Join Date
    Aug 2004
    Posts
    75
    methanol alchohol
    Can you smell it when its in the air? or are u too High Not to notice ? Lol

  6. #6
    Xtreme Enthusiast
    Join Date
    Feb 2004
    Location
    Tucson, Az, USA
    Posts
    978
    Quote Originally Posted by godsa
    Can you smell it when its in the air? or are u too High Not to notice ? Lol
    http://www.safety-council.org/info/OSH/methanol.htm

    It doesn't make you high, it makes you drunk like ethanol. Its also a lethal poison, so take care with it.

  7. #7
    Registered User
    Join Date
    Aug 2004
    Posts
    75
    I used around 15 percent anti and the rest Methanol..-38.4 Or so stable on the chiller playing Cs..Processor temps no idea


    The only area that the meth evap could come out from is sealed and thats where I put my temp probe in thru the T-Line.


    Thanks for the feedback and help
    Last edited by godsa; 01-22-2005 at 09:13 PM.

  8. #8
    Xtreme Member
    Join Date
    Jan 2004
    Location
    Portugal
    Posts
    256
    I use methanol in my new chiller @ -41ºC.
    I think methanol goes near -90ºC without freeze.
    ->Dual 2.8 Xeon * PC-DL Dlx * 2gb Kingston DDR400 * Connect3D X850Pro@XTPE
    HEATWARE

  9. #9
    Xtreme Addict
    Join Date
    Mar 2004
    Location
    So-Cal
    Posts
    1,437
    Quote Originally Posted by KaptCrunch
    or use prestone lowtox anti-freeze
    mixed PG 66% - 33%distilled water(1water-2PG parts)
    good for -60c
    its too thick to pump though even if it doesnt "freeze". Has anyone tried dynaline? I know it was metioned and chilly1 may have tried it.

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •