i have been running this ga p35-ds3r mobo for a few days now.
e6850 cpu
ga p35-ds3r mobo
2gb crucial ballistix 6400
ultra-120 h/s
winxp pro
it ran straight away at 3.0ghz.
went into bios f6.59(dont know much about overclocking)raised the fsb from 333 to 365fsb.memory frequency is now 854.so my cpu now runs at 3.290ghz
raised the spd to 2.0,i think that is for the ram?
when in mit,i cant seem to see the ram settings,do updated bioses reveal those settings?
cpuz gives my ram settings as.
dram frequency@ 365
fsb dram@1.1
cas latency@5 clocks
ras to cas delay@5
ras precharge@5
cycle time@17 clocks
i understand, 6400 mem runs at 4 4 4 12.
how do i set those timings in bios when i cant see them?
i would like to try for 3.6ghz,but dont know how,apart from raising the fsb.havent touched the other settings in mit.
my temps are in mid 30s for cpu,and inside case.
hoping for someone will be patient and help me out here,as i know it can be stressful to help someone who is new to these bios.
thanks.
Bookmarks