Page 3 of 27 FirstFirst 12345613 ... LastLast
Results 51 to 75 of 673

Thread: Custom phase change controller "Golden Froster"

  1. #51
    Xtreme Addict
    Join Date
    Jun 2004
    Location
    USA, Vermont
    Posts
    1,065
    NICE, work Golden_Eagle I am also designing something like this for my chiller I want it for this list of things.

    1) Control the compressor to turn on and off with the temps once I find the chillers happy place.
    2) Monitor res temps
    3) Control condenser fan speed
    4) monitor compressor temps and have a fan come on once a set temp is reached then shut off once it is bellow the temp by a certain margin.
    5) And a few other various things that I have forgotten at the moment...(did you know that weed gives you short term memory loss...)o nit pick at.

    So that is my plain here…once I design it I will put up a schematic for all of you to nit pick at…
    http://smbach.com/mad.gif

    Opty 175 Rig
    Lian-Li PC75B case, Thermaltake BT w/ 165 CFM delta fan, Enermax 550watt PSU (36A on 12+), x1950 Pro, DFI Lanparty NForce 4 Ultra-d (moded for SLI so that i can use the second slot at 8x), Opteron 175 CCBWE 0547 TMPW (2.80, 280x10, 1.5 volts), 2x1gb Mushkin Redline xp4000 (280 3-3-2-8, 2.65 volts), 80GB WD

    AM3 Rig
    Lian-Li PC-75b case, Asus Crosshair III Formula, 965 x4 C3 @ 4.1 1.525 volts 2.8 NB 1.25 volts, 2x2gb Dominator GT Cas 8 2000Mhz@ 1720 6-6-5-18-22 1.725 volts, Asus 5770 VT @1010/1435, Seasonic 850watt PSU 2x12v rails 40 amps each, 36GB raptor boot drive, 80GB WD storage drive, HeatKiller LT cpu block, BI GTX 360 with 6x Scythe 3000RPM fans in push/pull, MCP 655 variable pump on setting 5, EK 150ml res, all 1/2 inch

    DFI NF4 BIOS Guide

  2. #52
    I am Xtreme
    Join Date
    Dec 2002
    Posts
    5,943
    wow, where do i sign?

    great work m8

  3. #53
    Xtreme Member
    Join Date
    Mar 2005
    Location
    MadTown, Indiana
    Posts
    145
    Quote Originally Posted by chilly1
    I want 20 please!
    lol @ Chilly1! You know if you get 20 you will get 40 PM's going "I want one in my unit" hahahaha
    :: Q6600 GO 2.4Ghz :: 2x Sapphire HD 3870 Crossfire ::
    :: Asus P5K3 Premium Black Pearl w/ onboard 2GB DDR3 Turbo D3 ::

    :: X2 4200+ Manchester :: 2x Evga 7900gt signature series ::
    :: DFI LanParty UT nf4 SLI-DR Expert :: GSKILL 2GB(1GBx2) PC4000 HZ ::
    :: Chilly1 Single Stage ::

  4. #54
    Xtreme Member
    Join Date
    Nov 2002
    Location
    Hawaii
    Posts
    342
    Any updates on this project?
    Dell 2405FPW
    Lian Li PC-75B
    PCP&C 510 ASL
    DFI LP UT NF4 SLI-DR Expert
    Opteron 180
    Chilly1 SS Phase Change
    2x512MB Mushkin Redline XP4000
    BFG 7800 GTX 256MB PCI-E
    2xWD 740GD RAID 0
    Maxtor 6B300S0
    Plextor PX-716SA
    Audigy 2 ZS
    Klipsch Promedia Ultra 5.1

  5. #55
    Xtreme Addict
    Join Date
    Aug 2003
    Location
    Buenos Aires, Argentina
    Posts
    1,609
    Done.
    I will update later...

  6. #56
    XS News
    Join Date
    Dec 2003
    Location
    North Carolina
    Posts
    1,222
    How can I order one?
    RIP Dad. I will miss you always.

    Q6600,DFI X48 T2R,280 GTX,4gig ReaperX,XiFi Prelude,LL TYR PC X-2000,Westinghouse 37,Klipsch 5.1 Ultra

  7. #57
    Xtreme Addict
    Join Date
    Aug 2003
    Location
    Buenos Aires, Argentina
    Posts
    1,609
    G-Froster Value ready too


  8. #58
    Xtreme Member
    Join Date
    Nov 2002
    Location
    Hawaii
    Posts
    342
    Quote Originally Posted by Ssilencer
    G-Froster Value ready too

    What does this do compared to the Golden Froster?
    Dell 2405FPW
    Lian Li PC-75B
    PCP&C 510 ASL
    DFI LP UT NF4 SLI-DR Expert
    Opteron 180
    Chilly1 SS Phase Change
    2x512MB Mushkin Redline XP4000
    BFG 7800 GTX 256MB PCI-E
    2xWD 740GD RAID 0
    Maxtor 6B300S0
    Plextor PX-716SA
    Audigy 2 ZS
    Klipsch Promedia Ultra 5.1

  9. #59
    Xtreme Recruit
    Join Date
    Jul 2004
    Posts
    48
    G-Froster Value specs:

    • 1 Input for temperature sensor (-67 Fahrenheit or -55Celsius )
    • Led display , to show basic information.
    • 1 Motherboard power-on/off control.
    • 1 Compressor power control.
    • Fixed settings (-25c(-13f) power on, 0c(32f) power off) (this parameters can be
    customised by user request)
    • 5 min Restart delay (this parameters can be
    customised by user request)

  10. #60
    Xtreme Member
    Join Date
    Aug 2003
    Posts
    177
    Very nice. What controller and lcd did you use?

  11. #61
    Xtreme Member
    Join Date
    Nov 2002
    Location
    Hawaii
    Posts
    342
    Are those G-Froster Value's the ones you sent to Chilly1? I asked him to integrate a froster unit into my phase change cooler. To bad there's no blue LED Display for the value unit, that would've been sweet.
    Last edited by B5I8; 04-27-2005 at 04:31 PM.
    Dell 2405FPW
    Lian Li PC-75B
    PCP&C 510 ASL
    DFI LP UT NF4 SLI-DR Expert
    Opteron 180
    Chilly1 SS Phase Change
    2x512MB Mushkin Redline XP4000
    BFG 7800 GTX 256MB PCI-E
    2xWD 740GD RAID 0
    Maxtor 6B300S0
    Plextor PX-716SA
    Audigy 2 ZS
    Klipsch Promedia Ultra 5.1

  12. #62
    Xtreme Addict
    Join Date
    Aug 2003
    Location
    Buenos Aires, Argentina
    Posts
    1,609
    We sent both models to chilly1 to test them.
    An lcd disply for the value is overkill, cause it costs near 50% more, and then you have the full G-Froster X

  13. #63
    Xtreme Member
    Join Date
    Nov 2002
    Location
    Hawaii
    Posts
    342
    Quote Originally Posted by Ssilencer
    We sent both models to chilly1 to test them.
    An lcd disply for the value is overkill, cause it costs near 50% more, and then you have the full G-Froster X
    A blue LED readout, not an LCD. I don't like the standard red LED display.
    Dell 2405FPW
    Lian Li PC-75B
    PCP&C 510 ASL
    DFI LP UT NF4 SLI-DR Expert
    Opteron 180
    Chilly1 SS Phase Change
    2x512MB Mushkin Redline XP4000
    BFG 7800 GTX 256MB PCI-E
    2xWD 740GD RAID 0
    Maxtor 6B300S0
    Plextor PX-716SA
    Audigy 2 ZS
    Klipsch Promedia Ultra 5.1

  14. #64
    Xtreme Addict
    Join Date
    Aug 2003
    Location
    Buenos Aires, Argentina
    Posts
    1,609
    Quote Originally Posted by B5I8
    A blue LED readout, not an LCD. I don't like the standard red LED display.
    OK, if you send me blue led readouts, I use them for your exclusive G-Froster value
    For more info, send me a pm

  15. #65
    Xtreme Member
    Join Date
    Nov 2002
    Location
    Hawaii
    Posts
    342
    Quote Originally Posted by Ssilencer
    OK, if you send me blue led readouts, I use them for your exclusive G-Froster value
    For more info, send me a pm
    I'll show you where they sell them. I'm hoping Chilly1 will install the G-Froster X. I personally don't like to buy "value" anything, I like the full deluxe versions . You pay more but you get more.

    Here's the link to the Blue readouts:
    http://store.datel.com/cgi-bin/datel...b/Catalog/1043
    Dell 2405FPW
    Lian Li PC-75B
    PCP&C 510 ASL
    DFI LP UT NF4 SLI-DR Expert
    Opteron 180
    Chilly1 SS Phase Change
    2x512MB Mushkin Redline XP4000
    BFG 7800 GTX 256MB PCI-E
    2xWD 740GD RAID 0
    Maxtor 6B300S0
    Plextor PX-716SA
    Audigy 2 ZS
    Klipsch Promedia Ultra 5.1

  16. #66
    Xtreme Recruit
    Join Date
    Jul 2004
    Posts
    48
    Hi B5I8, I´m afraid that this thing they sell is not apropiate for the G-Froster value...
    We need 7 segment displays, not voltimeters.
    Btw we are in Argentina. It wouldn´t be cheap to import a few parts just for one card to sell.
    Last edited by Golden_Eagle; 04-27-2005 at 09:34 PM.

  17. #67
    Xtreme Member
    Join Date
    Nov 2002
    Location
    Hawaii
    Posts
    342
    Quote Originally Posted by Golden_Eagle
    Hi B5I8, I´m afraid that this thing they sell is not apropiate for the G-Froster value...
    We need 7 segment displays, not voltimeters.
    Btw we are in Argentina. It wouldn´t be cheap to import a few parts just for one card to sell.
    Oh sorry . I just thought it'd be nice to have a different color display that's all. Nice work BTW.
    Dell 2405FPW
    Lian Li PC-75B
    PCP&C 510 ASL
    DFI LP UT NF4 SLI-DR Expert
    Opteron 180
    Chilly1 SS Phase Change
    2x512MB Mushkin Redline XP4000
    BFG 7800 GTX 256MB PCI-E
    2xWD 740GD RAID 0
    Maxtor 6B300S0
    Plextor PX-716SA
    Audigy 2 ZS
    Klipsch Promedia Ultra 5.1

  18. #68
    Registered User
    Join Date
    Feb 2005
    Posts
    46
    Nice work Golden Eagle....This what i've waiting for so a Chilly1 unit I've been thinking of ordering

  19. #69
    Xtreme Member
    Join Date
    Nov 2002
    Location
    Hawaii
    Posts
    342
    Quote Originally Posted by Golden_Eagle
    Hi B5I8, I´m afraid that this thing they sell is not apropiate for the G-Froster value...
    We need 7 segment displays, not voltimeters.
    Btw we are in Argentina. It wouldn´t be cheap to import a few parts just for one card to sell.
    Just to let you know, I did find some 7 segment displays in blue that I'm pretty sure will work. Here are the links:

    http://www.digikey.com/scripts/DkSea...=24001&Site=US
    http://www.digikey.com/scripts/DkSea...=24223&Site=US
    Dell 2405FPW
    Lian Li PC-75B
    PCP&C 510 ASL
    DFI LP UT NF4 SLI-DR Expert
    Opteron 180
    Chilly1 SS Phase Change
    2x512MB Mushkin Redline XP4000
    BFG 7800 GTX 256MB PCI-E
    2xWD 740GD RAID 0
    Maxtor 6B300S0
    Plextor PX-716SA
    Audigy 2 ZS
    Klipsch Promedia Ultra 5.1

  20. #70
    Xtreme Recruit
    Join Date
    Jul 2004
    Posts
    48
    Quote Originally Posted by B5I8
    Oh sorry . I just thought it'd be nice to have a different color display that's all. Nice work BTW.
    U don´t have to be sorry, I bet lots of people like that blue leds, the problem is that we thought of Value version as a real cheap controller.
    I apreciate your links

  21. #71
    HVAC/R Engineer
    Join Date
    Nov 2003
    Posts
    3,978
    I will see what I can find for 7 segment displays in different colors here in the states...

  22. #72
    Xtreme Enthusiast
    Join Date
    Jul 2003
    Location
    Rio de Janeiro - Brazil
    Posts
    925
    After remove the small LCD from my case, i found that would fit like a glove :



    Very nice work...
    Q9550 EO @ 4.1
    Asus P5Q Deluxe
    4 Gb DDR2 Gskill
    2xVelociraptors 300 gb Raid 0
    Sapphire Vapor 4870 1Gb
    PCP&C 750w silencer psu

  23. #73
    Xtreme Recruit
    Join Date
    Jul 2004
    Posts
    48
    Maybe, but not all the 7 segment led displays are the same.

  24. #74
    Xtreme Recruit
    Join Date
    Mar 2004
    Location
    New Zealand
    Posts
    98
    Apologies for my ignorance, why is a restart delay important?
    Go! Go! Go!!

  25. #75
    Xtreme Member
    Join Date
    Mar 2005
    Location
    somewhere where the 2nd compressor isn't needed
    Posts
    249
    it's used as a protection when you shut off the compressor so the pressure on both side (high and low) equilize and make sure the compressor is safe to restart

Page 3 of 27 FirstFirst 12345613 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •