Custom phase change controller "Golden Froster"

[killermiller]

I don't think he is closing to because just Ratax is complaining. I read the most recent few pages and they are mostly complaints and seeing that this thread was idle for almost 4 months...obviously nothing is happening.

[kayl]

I don't think he is closing to because just Ratax is complaining. I read the most recent few pages and they are mostly complaints and seeing that this thread was idle for almost 4 months...obviously nothing is happening.

i know im waiting on stuff
NO pm replies either. 10days has turned into months.

Pitty about the cascade controller only controlling the cascade and not the PC, a thermostate and a few HPCO's can do that.

[boshuter]

IMO no thread should ever be removed from this section. You can close it to further discussion, but removing it should not be an option. If XS starts removing threads from this section after the "problem" is cleared up, then the whole idea of the section is suspect.

XS had some good ideas with the new rules and starting this section..... but it seems that has been abandoned and all the advertising is even more rampant than before. Thread "dissapearing" from this section does not put a good light on the state of affairs.

[jinu117]

Huh has there been thread disappearing from this section?

[runmc]

IMO no thread should ever be removed from this section. You can close it to further discussion, but removing it should not be an option. If XS starts removing threads from this section after the "problem" is cleared up, then the whole idea of the section is suspect.

XS had some good ideas with the new rules and starting this section..... but it seems that has been abandoned and all the advertising is even more rampant than before. Thread "dissapearing" from this section does not put a good light on the state of affairs.

I have not removed any threads. If you name one for me I will put it back.

Who is advertising?? Please let us know. We are still dead set on keeping these rules enforced.

[runmc]

i know im waiting on stuff
NO pm replies either. 10days has turned into months.

I received some controllers today that Hernan had reworked for me. Ssilencer has been busy with some construction. Maybe you will receive yours soon.

I am anxious to give these a try.

[Stocky]

Does anyone know where I can download the software for the G-Froster XE v1.2?

Thanks

[johann]

Does anyone know where I can download the software for the G-Froster XE v1.2?

Thanks

Does anyone know what happned to my 2 cascade controllers. I have never seen them or seen the money. As far as I remember Gray was going to buy them but nothing has happened.

Johann

[Stocky]

Does anyone know what happned to my 2 cascade controllers. I have never seen them or seen the money. As far as I remember Gray was going to buy them but nothing has happened.

Johann

Hey Johann, unfortunately I don't know where your cascade controllers might be

However, the SS unit that I need the Golden Froster software for happens to be one of your builds which I bought from Chris in Canvey Island. It's an amazing unit, and is holding my QX6850 very well under load

You wouldn't happen to know where I could get the v1.2xe software, or if you have a copy handy you could email to me?

Thanks again

[johann]

Hey Johann, unfortunately I don't know where your cascade controllers might be

However, the SS unit that I need the Golden Froster software for happens to be one of your builds which I bought from Chris in Canvey Island. It's an amazing unit, and is holding my QX6850 very well under load

You wouldn't happen to know where I could get the v1.2xe software, or if you have a copy handy you could email to me?

Thanks again

What unit is that Stocky, will be good to know?

Im glad its working good after all this time.

Will look for the software, must be here somewhere..

[Stocky]

What unit is that Stocky, will be good to know?

Sorry, I've been far to busy recently - Here's a pic of it, I didn't realise it was so dusty until the flash caught it!

[otisthecat]

how can i get hold of one of these and how much

[Ratax]

how can i get hold of one of these and how much

Well, first thing to do is transfer the money to Ssilencer as soon as you can.
Then you'll have to wait a few years to receive it... if you receive it!

I'm waiting for about 2 years for the cascade controller that never arrived...

Last notice was on 19 August 2007, Gray (because the controller should be shipped to me by him) saying that the controller will be shipped in that week... never came and no reply from Gray to PM's... maybe a little delay on post office?

Well my friend, think twice before do this buy...

Regards!

[Sneil]

I am in need of an installation manual for my Cascade controller. I bought it a long while ago and am now finally installing. Any help? are Ssilencer and Golden still around?

[vservera]

nice display. very nice

[teyber]

nice display. very nice

trying to get 100 posts?

[Swinghammer]

My apologies for dredging up this old thread.

Was only by chance that I remembered about my Controller,
Getting old and forgetful . And don't like to air dirty laundry to the public.
But this may save others from similar problems.



In April 2006 I ordered and paid for a Phase Controller from Ssilencer, Everthing was looking great. I would have expected 8 weeks at most to ship to Australia
But maybe that was wishful thinking

But Now it is coming up past 3.5 yrs and I still have not received anything from him. Refund or Controller

Maybe it will arrive new year

[billdavis]

i think they fell off of the face of the earth.

[Danny_75]

Does anyone have the control panal from the Gfroster 2? The links are dead.

[Gray Mole]

http://cid-55e759245f8cb81b.office.l...owse.aspx/gfcp

Stuck it on the 'skydrive' though I suck at hosting so lemme know if that worked

Take all 3 files, should be version 2.5 of the Gfroster control panel.

Just run the install file with all three in a folder, should load it up


Gray

[Danny_75]

I have got it mate. Thanks for that.

Its prob me but doesnt see the Froster. It might be cos its only the 1.6ex

[Gray Mole]

Saw your other post...

The Froster is a Serial system. Not usb

So you'll have to buy an adapter if you have no Com port on the motherboard. The USB to COM serial adapter. Be warned, it doesn't always work.

But at least it's an option, and they're pretty cheap, though buy a decent one and you have a chance of the thing working.

I think 2.5 worked with most of the froster's, but I can't remember. Wish they were still around making/repairing them


Hope that helps

Gray

[Danny_75]

Saw your other post...

The Froster is a Serial system. Not usb

So you'll have to buy an adapter if you have no Com port on the motherboard. The USB to COM serial adapter. Be warned, it doesn't always work.

But at least it's an option, and they're pretty cheap, though buy a decent one and you have a chance of the thing working.

I think 2.5 worked with most of the froster's, but I can't remember. Wish they were still around making/repairing them


Hope that helps

Gray

It does mate. Thanks for all your help its apprectated.

Thanks again.