Asus A8N better vcore guide

[GomerPyle]

May be a lot knowing this but hope it can help others.

Download ClockGen for NF4 and make a shortcut to the ClockGen.
Make a .txt file with info like

[CG-NVNF4]
VID=1.550
FID=13
FSB=230
PCI-E=100

In the shortcut you add "-file=xxxxx.txt" (more detailes look at homepage for ClockGen)

ClockGen is at default set at VID=1.475, so this gives some extra vcore for the Asus A8N - instead of around 1.584 you will get around 1.664 vcore.

You can for instance put the shortcut in the "startup" or place it on the desktop.

I'll be looking into the vcore mod, but have not figured it out yet, so hopes this can be a small start

[blinky]

can u set VID to 1.6 and get 1.71 etc.

[GomerPyle]

No afraid not! But this make me hope that there is no vcore ovp. Think this 0.1v is better than nothing hehe.

[Trader88]

Great info, THANKS

[Cyrus The Virus]

It didn't work for me. I have a max Vcore op 1.584V (as I already had) with Bios 1003-004, but isn't this because winchesters undervolt ??

[Funny_S]

doesn't work,
going to try the new beta bios 1003-005

[tombman]

there is a mistake, NO "" and it works

TARGET:


X:\...PATH...\CG-NVNF4.exe -file=savefile.ini

[choseone214]

winchesters will give max .1v less than the newcastles and fx cpus becasue there defualt vcore is .1v less

[esoteradactyl]

posted this already

[fagin]

I get 1.62 anyway from bios - with my winnie! If I set vcore to max - 1.6500 - I don't, I get 1.5. If I drop the vcore in bios to 1.6250 in bios I get 1.62! Mind you I doesn't do my OC any good . If I set vcore to 1.6375, I get 1.54. I don't really understand this!

[Cyrus The Virus]

there is a mistake, NO "" and it works

TARGET:


X:\...PATH...\CG-NVNF4.exe -file=savefile.ini

if I do this without de " then when I click OK it gives an error and with " it doesn't