Laugh all you want but they only did 230MHz when I got them. Some RAM has been proven to gain from burning in so it is not just a myth.Originally Posted by tictac
the_n00b<:o): too early stick.
Laugh all you want but they only did 230MHz when I got them. Some RAM has been proven to gain from burning in so it is not just a myth.Originally Posted by tictac
the_n00b<:o): too early stick.
Your Twinmos RAM has Mitsubishi Chips on it. Test it, but it'll never perform like Winbond. I bet it doesn't have the two dimples in the middle, but one half dimple in the middle of the lower edge of the chip.Originally Posted by tom_ed
Quote from one of our professors:
"Reality is hiding in the imaginary part."
Originally Posted by the_n00b<:o)
it works but the VVT track gets all out of whack so the more volts dont really help much...
tom: that looks like winbond to me buddy, start cooking them and let us know how it goes.
Hi there guys and HAPPY NEW YEAR......
Now........Testing those two modules I was quit amazed I could say......
They ACT like BH-5 modules BUT COLDER.......on an INTEL rig.......
With 3.2Vdimm(provided by the DDR Maximizer - clean power - .....they reached over 240MHz at Cas 2 - 5 - 2 - 2.........NONE CH-5 chips works at those settings on an INTEL rig so I believe that they are NOT equiv. to CH-5 chips........
Twinmos 2 x 512MB UTT on an ABIT AS8 Mobo with the 865 chipset.......at 3.55Vdimm....
PAT = Disabled
Timings :
2 - 5 - 2 - 2
32M
Auto
Normal
4
Enable
Disable
The funny here is that the cpu-z shows "crazy" product date......
.......and these are 2 x 512MB BH-5 chips for comparison.......at the same config.......
ALL I have to say is : Twinmos with the UTT chips = BH-5 chips........
Last edited by hipro5; 01-02-2005 at 08:56 AM.
INTEL PWA FOR EVER
Dr. Who my arss...
.........
so you guys saying
160$ for a GIG of good overclocking RAM ?
ASUS P5K-E // E8400 Q746A519
G.Skill F2-8000CL5D-4GBPQ
LC 550W GP// XPERTVISION 9600GT
As I know esdee bought them about 140Euros........Originally Posted by TEDY
I think I'll get 2 x 256MB ones to see how they will do.......Hmmmm.......
INTEL PWA FOR EVER
Dr. Who my arss...
.........
damn hipro...
now i want that maximizer ever more lol.
i need to buy another set of ram for an old computer im selling so ill give these a shot and if they are good then ill keep em and if they are bad then away they go.
Is it this:
http://www.newegg.com/app/ViewProduc...218-404&depa=1
or this?
http://www.newegg.com/app/ViewProduc...218-059&depa=1
Or am I completely off?
Originally Posted by tom_ed
Hmm, interesting. Then Twinmos changed something, as some time ago all Winbond based Twinmos RAMs began with 04xxxx and so on. Yours is 03xxx and is definitely Winbond based.
Good luck with the sticks.
Edit: Well, got it wrong. Now I realized that it's the 4 at the end and not in the beginning. So yours are chips from week 25 in 2003 and the 4 means that it's winbond based. That's it.
So yours should basically be CH-5 chips.
Last edited by celemine1Gig; 01-07-2005 at 09:14 AM.
Quote from one of our professors:
"Reality is hiding in the imaginary part."
So would that make this http://www.tekheads.co.uk/s/product?product=601808 the stuff to get ?
Im going to grab a 2x256 on tues if so.
damn cheap :>
ASUS P5K-E // E8400 Q746A519
G.Skill F2-8000CL5D-4GBPQ
LC 550W GP// XPERTVISION 9600GT
well both been tested on my DFI 250gb @ 3.1v. I would have gone higher but im on a crappy 300w psu that has a 3.3v rail @ 3.15v
one stick did 240mhz 2-2-2-5 and the other did 247mhz 2-2-2-5. i feel with more volts they could go higher they scaled well up to there.
Jessfm that is the exact kit that this is, but i dont think they come with winbond chips anymore.
Last edited by tom_ed; 01-02-2005 at 10:27 AM.
who could buy this for me in europe and send me ? i could wire the money
got no cc
ASUS P5K-E // E8400 Q746A519
G.Skill F2-8000CL5D-4GBPQ
LC 550W GP// XPERTVISION 9600GT
I think its worth a look then.
But Hipro5 is reffering to a newer chip thats on these ??
So the chips between BH5 and the new UTT are poor clockers( CH5 or Mitsubishi chips?)
or am I totaly confused now ( to be fair I have had a couple of beers today)
so we should hunt for Twinmos with mtec/Twinmos chip
week 82 2004 or newer
Thanks Hipro5
Week 82 sounds tough...
yes it is
w00t, I just bought a kit of OCZ VX (still on the way), now I have to buy these as well?
away & gone
tictac you need to reboot your brain!!!!Originally Posted by tictac
if this is your first night in xtremesystems,
you have to overclock.
Originally Posted by hipro5
My CH-5 does the same on abit IC7-G 3.55V
i'll post shots tommorow
yeah ive seen newer ch-5 doing that before...
but still, what do i buy!?
lol
yeah i'm a little confused here as well are we supposed to get the speed premium with the twinmos chips or the cheap ones with the mtec chips?
me 2Originally Posted by LSANTHRAX
Bookmarks