Try it :p
Try it :p
i5 750 4.20GHz @ NH-D14 | 8GB | P7P55DLE | 8800U | Indilinx SSD + Samsung F3 | HAF922 + CM750W
Past: Q6600 @ 3.60 E6400 @ 3.60 | E6300 @ 3.40 | O165 @ 2.90 | X2 4400+ @ 2.80 | X2 3800+ @ 2.70 | VE 3200+ @ 2.80 | WI 3200+ @ 2.75 | WI 3000+ no IHS @ 2.72 | TBB 1700+ @ 2.60 | XP-M 2500+ @ 2.63 | NC 2800+ @ 2.40 | AB 1.60GHz @ 2.60Originally Posted by CompGeek
NEW VERSION AVAILABLE
Voltage monitoring & other stuff. Through speedfan AFAIR right now.
i5 750 4.20GHz @ NH-D14 | 8GB | P7P55DLE | 8800U | Indilinx SSD + Samsung F3 | HAF922 + CM750W
Past: Q6600 @ 3.60 E6400 @ 3.60 | E6300 @ 3.40 | O165 @ 2.90 | X2 4400+ @ 2.80 | X2 3800+ @ 2.70 | VE 3200+ @ 2.80 | WI 3200+ @ 2.75 | WI 3000+ no IHS @ 2.72 | TBB 1700+ @ 2.60 | XP-M 2500+ @ 2.63 | NC 2800+ @ 2.40 | AB 1.60GHz @ 2.60Originally Posted by CompGeek
Originally Posted by IvanAndreevich
Talking about the benchmarks? or the "Blend" torture test that uses ungodly amounts of RAM?
Here's a screen shot of 282 stable with most of the main stability benches. That OCCT Program is a great little program that tests your system for 1/2 hour and graphs out all the voltages and temps of your system during the 1/2 Hour. Instead of crashing and hanging up your computer if its unstable, it will stop the test instead.
3.75 Ghz E6600 SL958 @1.4volts WC by Apogee
Intel D975XBX2 Rev 503 BIOS 2431 1066 Strap (This Mobo SUCKS!)
4GB Crucial Ballistix DDR1000 @ DDR834 5,5,5,15
EVGA 8800GTX WC MCW60 (685GPU/1050Mem)
4X74 10,000RPM WD Raptor RAID-0 (260MB/S)
PC Power & Cooling 750 Quad
SILVERSTONE GD01S-MXR HTPC Case
Intel HD Audio... Saving up for i-Meridian
Custom Designed/Built 6x500Watt + 1x1500 Watt Amplifier .005% THD+N @ 20Khz not 1Khz
Custom Designed/Built D'Appolito Reference Speakers w/ Custom -24dB crossovers
Custom Designed/Built 15" Digital Designs Audio 9515f tuned to 22Hz.
52" LG DLP 52SX4D HDTV
Sweet little program although one question, is there any way to hack it to run longer than 60minutes? so I can run it overnight ....
you're right i got 51c i din't click fpu.....oh well it's a d*mn good tesOriginally Posted by IvanAndreevich
mobo: strix b350f
gpu: rx580 1366/2000
cpu: ryzen 1700 @ 3.8ghz
ram: 32 gb gskill 2400 @ 3000
psu: coarsair 1kw
hdd's: samsung 500gb ssd 1tb & 3tb hdd
Just giving it a little run here too.
Got a heat spreaderless A64 3000+(Clawhammer with 512k l2 disabled) running at 2.5GHz with 1.8v, watercooled. Never seen more than 42C before with Prime 95 or any other software for that matter.
S&M has got me upto 45C after 10 minutes, but things are still stable
~48C but one side of my case is always open otherwise it reaches 60C (newest beta bios)
...
Yeah, I think there needs to be an unlimited test too. Should I contact the author and ask for that option?
i5 750 4.20GHz @ NH-D14 | 8GB | P7P55DLE | 8800U | Indilinx SSD + Samsung F3 | HAF922 + CM750W
Past: Q6600 @ 3.60 E6400 @ 3.60 | E6300 @ 3.40 | O165 @ 2.90 | X2 4400+ @ 2.80 | X2 3800+ @ 2.70 | VE 3200+ @ 2.80 | WI 3200+ @ 2.75 | WI 3000+ no IHS @ 2.72 | TBB 1700+ @ 2.60 | XP-M 2500+ @ 2.63 | NC 2800+ @ 2.40 | AB 1.60GHz @ 2.60Originally Posted by CompGeek
give it a try, would be nice.
All along the watchtower the watchmen watch the eternal return.
I checked the power consumption of my PSU under full load:
CPU Burn-in v1.017......................: 144W
Prime95 In-place large FFTs v23.7.1: 153W
OCCT v0.91:...............................: 153W
S&M FPU (v1.3):..........................: 160W
nice!
giving it a try now
Damn it, can't find the author's email.
i5 750 4.20GHz @ NH-D14 | 8GB | P7P55DLE | 8800U | Indilinx SSD + Samsung F3 | HAF922 + CM750W
Past: Q6600 @ 3.60 E6400 @ 3.60 | E6300 @ 3.40 | O165 @ 2.90 | X2 4400+ @ 2.80 | X2 3800+ @ 2.70 | VE 3200+ @ 2.80 | WI 3200+ @ 2.75 | WI 3000+ no IHS @ 2.72 | TBB 1700+ @ 2.60 | XP-M 2500+ @ 2.63 | NC 2800+ @ 2.40 | AB 1.60GHz @ 2.60Originally Posted by CompGeek
Can you run those again with ACPI Multiprocessor?Originally Posted by The Byter
All along the watchtower the watchmen watch the eternal return.
I'm sure you've all seen this however, I find it to be useful tool to determine how these utilities are stressig the CPU. It's how I discovered PRIME didn't tax te processor at 100% LOAD, SETI does but fluctuates, I run SETI and PRIME concurrently to get a full-load, and some serious temps;
Panopsys Throttle Watch and you can download the Zip file here.
When you run the program open "View" and then click "Frequency Graph." Originally it only detected thermal throttling on P4, P-M and Xeon's, now it's A64 compatable. Obviosly temp is the ultimate test, this is just another tool, which shows TM1 or TM2 in real-time or logged.
SYSTEM:
P4 550 at 3.4GHz 1.373Vcore
H20 cooled Alphacool NexXxos BOLD for 775
Black Ice Xtreme II
Papst 2x120mm/55CFM
Alphacool 1500 (OASE adjustale pump from 900LPH ~ 1500LPH)
Cooplex 25 Res/6mm lines
Abit AA8
Corsair 4300C3PRO 1GB
ATI X800 XT
OCZ Powerstream 420
Last edited by Liquid3D; 01-29-2005 at 10:59 PM.
Q6600 (8x401FSB 1.28Vcore)
2x FX-74
Gigabyte P35C-DS3R
Asus L1N64-SLI
Corsair DDR3-1800 2GB
Geil DDR2-800 4x1GB
BFG 8800Ultra
Leadtek 7950GX2 DD GX2
Tuniq 1200W
NZXT 1200W
Storm WB 775
2x Swiftech Microdrive Socket-L
I don't see the 1st two screens.
i5 750 4.20GHz @ NH-D14 | 8GB | P7P55DLE | 8800U | Indilinx SSD + Samsung F3 | HAF922 + CM750W
Past: Q6600 @ 3.60 E6400 @ 3.60 | E6300 @ 3.40 | O165 @ 2.90 | X2 4400+ @ 2.80 | X2 3800+ @ 2.70 | VE 3200+ @ 2.80 | WI 3200+ @ 2.75 | WI 3000+ no IHS @ 2.72 | TBB 1700+ @ 2.60 | XP-M 2500+ @ 2.63 | NC 2800+ @ 2.40 | AB 1.60GHz @ 2.60Originally Posted by CompGeek
I don't have Multiprocessor :\Originally Posted by STEvil
Search google for "ricky tweak". It's just installing a multiprocessor driver on a singleprocessor system. You don't need dual CPUs to use that.
i5 750 4.20GHz @ NH-D14 | 8GB | P7P55DLE | 8800U | Indilinx SSD + Samsung F3 | HAF922 + CM750W
Past: Q6600 @ 3.60 E6400 @ 3.60 | E6300 @ 3.40 | O165 @ 2.90 | X2 4400+ @ 2.80 | X2 3800+ @ 2.70 | VE 3200+ @ 2.80 | WI 3200+ @ 2.75 | WI 3000+ no IHS @ 2.72 | TBB 1700+ @ 2.60 | XP-M 2500+ @ 2.63 | NC 2800+ @ 2.40 | AB 1.60GHz @ 2.60Originally Posted by CompGeek
update processor driver in device manager list then reboot twice.
All along the watchtower the watchmen watch the eternal return.
Here's all my screenshots comparing S&M to SETI. First running at 200FSB (default speed and Vcore) then showing temps IDLE/overclocked at 250FSB (4.2GHz at 1.481Vcore) and finally LOAD/overclocked comparing both utilities.
Last edited by Liquid3D; 01-29-2005 at 11:04 PM.
Q6600 (8x401FSB 1.28Vcore)
2x FX-74
Gigabyte P35C-DS3R
Asus L1N64-SLI
Corsair DDR3-1800 2GB
Geil DDR2-800 4x1GB
BFG 8800Ultra
Leadtek 7950GX2 DD GX2
Tuniq 1200W
NZXT 1200W
Storm WB 775
2x Swiftech Microdrive Socket-L
why does S&M show only 49% load?
All along the watchtower the watchmen watch the eternal return.
I have a feeling it's due to Hyperthreading since it shows two processor's O and 1 instances, if you look at the little logo in red and blue on S&M's upper LEFT corner.
I just ran the program again and it indicated 67% on processor 0 and 64% on processor 1, however; when overclocked at some points it reached 92% which is also strange. This is most likely the P4's thermal/power monitoring features working. This is explained in Intel's VRD White Paper section 2:4 onwards.
Last edited by Liquid3D; 01-29-2005 at 11:57 PM.
Q6600 (8x401FSB 1.28Vcore)
2x FX-74
Gigabyte P35C-DS3R
Asus L1N64-SLI
Corsair DDR3-1800 2GB
Geil DDR2-800 4x1GB
BFG 8800Ultra
Leadtek 7950GX2 DD GX2
Tuniq 1200W
NZXT 1200W
Storm WB 775
2x Swiftech Microdrive Socket-L
Liquid3D
Um you have to use FPU only for burning the CPU.
i5 750 4.20GHz @ NH-D14 | 8GB | P7P55DLE | 8800U | Indilinx SSD + Samsung F3 | HAF922 + CM750W
Past: Q6600 @ 3.60 E6400 @ 3.60 | E6300 @ 3.40 | O165 @ 2.90 | X2 4400+ @ 2.80 | X2 3800+ @ 2.70 | VE 3200+ @ 2.80 | WI 3200+ @ 2.75 | WI 3000+ no IHS @ 2.72 | TBB 1700+ @ 2.60 | XP-M 2500+ @ 2.63 | NC 2800+ @ 2.40 | AB 1.60GHz @ 2.60Originally Posted by CompGeek
a64s use t1 and t2 throttling?Originally Posted by Liquid3D
I believe there power saving modes
jjcom
New version people.. get it!
i5 750 4.20GHz @ NH-D14 | 8GB | P7P55DLE | 8800U | Indilinx SSD + Samsung F3 | HAF922 + CM750W
Past: Q6600 @ 3.60 E6400 @ 3.60 | E6300 @ 3.40 | O165 @ 2.90 | X2 4400+ @ 2.80 | X2 3800+ @ 2.70 | VE 3200+ @ 2.80 | WI 3200+ @ 2.75 | WI 3000+ no IHS @ 2.72 | TBB 1700+ @ 2.60 | XP-M 2500+ @ 2.63 | NC 2800+ @ 2.40 | AB 1.60GHz @ 2.60Originally Posted by CompGeek
Bookmarks