Sorry to hear about the FX55. Its good that you have a 4000+ spare that you can throw in though
Sorry to hear about the FX55. Its good that you have a 4000+ spare that you can throw in though
Yea it is a bummer. The 4000 isn't really a spare though, I had to take it out of my regular everyday rig.Originally Posted by Bennah
BTW: VX running stable maxed out timings at 260 sofar, still going.
OPP
Meh, even more sorry for you if the 4000+ was'nt a spare
Carry on with the overclocking. We or I want that 4000+ to get chilly and some 3d mark action to be produced
U wish!Originally Posted by Onepagebook
OPP, what pci-x video card are you using?
I'm a hard worker too. Can I get some of the really good sticks too?Originally Posted by Onepagebook
{2012 27imac-3.4i7-680mx-32gb ram-768SSD+External TB Samsung840pro ssd + TB velociraptors-Moto828mkIII/Marantz/Amphion Sound-HPzR30w 2nd monitor}
Originally Posted by OPPAINTER
Ouch that hurts. Why is it always the most expensive part of the system that fails. Was your 55 topless?
{2012 27imac-3.4i7-680mx-32gb ram-768SSD+External TB Samsung840pro ssd + TB velociraptors-Moto828mkIII/Marantz/Amphion Sound-HPzR30w 2nd monitor}
For what it's worth, I just got off the phone with MSI USA sales, and they say there will be NO Diamond version for the US, at least as of now. The Platinum-SLI will be out first, maybe next week they think, and a couple/few weeks later the regular platinum version will show up in the states.
{2012 27imac-3.4i7-680mx-32gb ram-768SSD+External TB Samsung840pro ssd + TB velociraptors-Moto828mkIII/Marantz/Amphion Sound-HPzR30w 2nd monitor}
I'm useing MSI RX800, it's a x800xt basicly. Lets just say MSI owed me that alsoOriginally Posted by trans am
BTW: OCZ VX 3d stable at 268 now with maxed out timings, 3.68V loaded.
OPP
Guys,
I think it IS important that we don't SCARE AWAY/CHASE AWAY industry reps that hang out here! SO just keep the "he's the owner" and "nah, nah, nah" posts to yourselves!
C
Best I can do with My VX memory on this is 268Mhz max timings. 270 I have problems with.
Not bad 3D at only 10x268= 2680MHz, the MSI RX800 I ran at PE clocks of 520/560.
OPP
Nice work OPP with the VX
Not bad, but not killer. Needs an FX-55
i5 750 4.20GHz @ NH-D14 | 8GB | P7P55DLE | 8800U | Indilinx SSD + Samsung F3 | HAF922 + CM750W
Past: Q6600 @ 3.60 E6400 @ 3.60 | E6300 @ 3.40 | O165 @ 2.90 | X2 4400+ @ 2.80 | X2 3800+ @ 2.70 | VE 3200+ @ 2.80 | WI 3200+ @ 2.75 | WI 3000+ no IHS @ 2.72 | TBB 1700+ @ 2.60 | XP-M 2500+ @ 2.63 | NC 2800+ @ 2.40 | AB 1.60GHz @ 2.60Originally Posted by CompGeek
I'm really bumed my FX died, it may take me a while to get another one.Originally Posted by IvanAndreevich
This is a nice mobo I gotta admit
OPP
Hm any idea how it died, too much vcore, heat..?
Just curious over how much a beating these things can take before they go to the chip graveyard above.
I have no clue, It was just siting in a box for a month, didn't use it. Now I try and fire it up and doesn't work.Originally Posted by MrQ3W
OPP
nah, I am going anywhere, besides that "Gskill rep" I am a serious hard overclocker here with you guys and i am very glad to help any problems other than ramOriginally Posted by charlie
Originally Posted by OPPAINTER
need any bios?
you got PM OPP
Last edited by Onepagebook; 12-23-2004 at 01:44 PM.
sorry to hear about the FX-55Originally Posted by OPPAINTER
---
I've been looking at this v-core IC chip, FB pin is 9.Originally Posted by Onepagebook
OPB,
Why do you think that by hooking a VR to pin 9 it would not increase v-core??
To me it looks like the pin9 to VR to ground would work.
http://www.intersil.com/data/fn/fn9178.pdf
OPP
ok dude, I got coldheat cordless soldering gun already..will give a shot tomorrow..Originally Posted by OPPAINTER
I appreciate that!
Nice
Coldheat cordless,,, did you get that in your stocking for Christmas?Originally Posted by Onepagebook
OPP
Originally Posted by OPPAINTER
oh ya..it's really amazing,
BTW..YGPM
Solder to the end of this resister.
I'd try a 50k VR set at 50k, work your way down.
OPP
Last edited by OPPAINTER; 12-28-2004 at 05:39 PM.
Originally Posted by OPPAINTER
ok, thanks Master.
gonna try..
OPB
Bookmarks