Graphics Card / Mach 1 or 2 Cooling

[bob(nz)]

Hi

Anyone managed to rig up a Prometeia head direct onto either an NVidia or ATI card? Have done some searching but cant find any previous posts.

I am sure that a Vapo would be easier (round slug), but curious to know if anyone has succesfully done this before setting out on this mission

[reject]

yeh its been done.
you could get the mounting thingy, and put bolts through the holes in the card, with a metal strip between lik on the x800 hs
thats how i mounted my cpu hs on the 5900xt

[GomerPyle]

It can be done quite easy. Just use some clambs if its only for benchmarking.

Here is a picture from Tom Holcks 2xprommy mount.

[kayl]

wow that is cool.

[Overklokk]

You can do lik i did on a prom that i converted too GPU cooler with r404a/r410A






lol...BTW: diplay is wayyy of

[CodeRed]

You can do lik i did on a prom that i converted too GPU cooler with r404a/r410A
lol...BTW: diplay is wayyy of

Overklokk,

I measured up my prom evap housing and an X800 card. It seems that if you dont want the evap to hit the AGP slot then the GPU core has to be mounted way off center (right near the bottom of the evap slug).

Your pic has a core imprint near the middle, how did ya do that?

[Overklokk]

Overklokk,

I measured up my prom evap housing and an X800 card. It seems that if you dont want the evap to hit the AGP slot then the GPU core has to be mounted way off center (right near the bottom of the evap slug).

Your pic has a core imprint near the middle, how did ya do that?

Like u se on the picture i have removed the orginal evap encloser and made a new one.

[Aphex_Tom_9]

It can be done quite easy. Just use some clambs if its only for benchmarking.

Here is a picture from Tom Holcks 2xprommy mount.

hahaha, front AND BACK of the card...hell why not?

[G H Z]

Like u se on the picture i have removed the orginal evap encloser and made a new one.

What block is that, or is it the original with a new enclosure only?

Heh, -91 is good

[Overklokk]

What block is that, or is it the original with a new enclosure only?

Heh, -91 is good

Its the orginal evap with new homemade enclosure.

[fatty]

do you have to insulate the agp slot some one told me you have to insulate it as the cold will travel???

[eva2000]

Overklokk,

I measured up my prom evap housing and an X800 card. It seems that if you dont want the evap to hit the AGP slot then the GPU core has to be mounted way off center (right near the bottom of the evap slug).

Your pic has a core imprint near the middle, how did ya do that?

ah ha your new recent mach1 purchase i see