Originally Posted by Lood007
Well, im still useing it, but in a K7 set up.
240MHz (DDR 480), cas:3-2-2-2-11-9-12-1-3-3-3-3-4-eefe, 3.2vdimm/1.9vdd
System in sig.
Originally Posted by Lood007
Well, im still useing it, but in a K7 set up.
240MHz (DDR 480), cas:3-2-2-2-11-9-12-1-3-3-3-3-4-eefe, 3.2vdimm/1.9vdd
System in sig.
AMD XP-M 2600+ @ 2.4GHz (12x200) - 1.75v
DFI NFII Ultra Infinity Rev. A
2x1GB Crucial Ballistix Tracer PC4000 @ 400MHz 2-2-2-5 - 2.8v
BFG 7800GS @ 475/1550
OCZ Powerstream 600W (+3.6, +5.4, +12.6)
Swiftech MCX462-V-->92mm Tornado-->MCX159-A
nForce UDP 5.10
Forceware 97.44 XtremeG
Win XP Home SP2
Well im qualifying OCZ memeory on the epox 9NDA3+ so i can offer support to users.
This was with 3500EB at 3.2Vdimm 260x10 dual channel. bench is unbuffered as this is the only way to see low latency ram results as the buffered bench is more FSB dependant.
See what you think?
Last edited by Tony; 06-20-2008 at 01:46 PM.
Got a problem with your OCZ product....?
Have a look over here
Tony AKA BigToe
Tuning PC's for speed...Run whats fast, not what you think is fast
Not bad!
Is that at 2T CMD rate? Or is that just a sandra screw-up?
Q6600 G0 at 3.5 GHz 1.30v on DFI P35-T2R
4GB OCZ PC2-9200 Reapers
150GB WD Raptor, 2xWD 120GB RAID-0, 3x320GB HDD
BFG 8800GTS OC at 675/2100
Danger Den Based Water Cooling: TDX-775, 8800GPU, DD NB Block on Thermochill PA120.3 Radiator w/ DD 12V Pump
OCZ GameXStream 850W
MountainMods U2-UFO 18" Cube Case
DELL 2405FPW 24" Widescreen LCD
RME-Audio Fireface 800 based audio production
Its a sandra screw up..its 1TOriginally Posted by Lood007
finally broke 4k unbuffered also.Check this out.
Last edited by Tony; 06-20-2008 at 01:46 PM.
Got a problem with your OCZ product....?
Have a look over here
Tony AKA BigToe
Tuning PC's for speed...Run whats fast, not what you think is fast
I'm an idiot and a newbie to sandra bandwith testing (i just stuck to memtest results previously). How do you do an unbuffered test in sandra (which boxes to unselect in the options menu)Originally Posted by bigtoe
Thanks. I am too lazy to do a search.
Q6600 G0 at 3.5 GHz 1.30v on DFI P35-T2R
4GB OCZ PC2-9200 Reapers
150GB WD Raptor, 2xWD 120GB RAID-0, 3x320GB HDD
BFG 8800GTS OC at 675/2100
Danger Den Based Water Cooling: TDX-775, 8800GPU, DD NB Block on Thermochill PA120.3 Radiator w/ DD 12V Pump
OCZ GameXStream 850W
MountainMods U2-UFO 18" Cube Case
DELL 2405FPW 24" Widescreen LCD
RME-Audio Fireface 800 based audio production
Here is my buffalo 3700 using the same memory chips as OCZ EB Sandra soft at 250HTT but it shows as 249HTT at 98% efficiency unbuffered.
Last edited by SnipingWaste; 12-08-2004 at 10:28 PM.
Here is a little OCZ 3700 EB lovin
MSI K8N Neo2
FX53
OCZ 3700 2x512@3.2v
Cooler Master 110 case w/window and cold cathode/Sony E540
I7 920@4.4Ghz 210x21 Megahalems
Gygabyte GA-X58A-UD3R
OCZ 6Gb DDR3 1600
XFX ATI 5770 960/1400
Seagate Barracuda 1.5tb
Lite-On DVD RW iHAS220-08/Sony Optiarc AD-7190S
PC Power & Cooling Silencer 750
That's my 2008 Street Glide.
nice.
cowpuppy,
What timings are you running them at with 3.2V?
Q6600 G0 at 3.5 GHz 1.30v on DFI P35-T2R
4GB OCZ PC2-9200 Reapers
150GB WD Raptor, 2xWD 120GB RAID-0, 3x320GB HDD
BFG 8800GTS OC at 675/2100
Danger Den Based Water Cooling: TDX-775, 8800GPU, DD NB Block on Thermochill PA120.3 Radiator w/ DD 12V Pump
OCZ GameXStream 850W
MountainMods U2-UFO 18" Cube Case
DELL 2405FPW 24" Widescreen LCD
RME-Audio Fireface 800 based audio production
I'm using 24/7 252MHz 3-2-2-10 1T DC 2x512MB with 3.2V & ocz booster on neo2 platinum.
Athlon 64 3000+ Winchester @ 2,6GHz, ASUS V9999GE 256MB @ 450/1200 16/6
MSI Neo2-54G Platinum Edition, OCZ 3200 VX 1GB, OCZ DDR Booster, OCZ 520W, WD Raptor 74GB, Mitsubishi 2070SB 22" CRT
I thought the EBs dont clock well with Neo2
or
They just need high vdimm?
seems like they just like high vDIMM.
Q6600 G0 at 3.5 GHz 1.30v on DFI P35-T2R
4GB OCZ PC2-9200 Reapers
150GB WD Raptor, 2xWD 120GB RAID-0, 3x320GB HDD
BFG 8800GTS OC at 675/2100
Danger Den Based Water Cooling: TDX-775, 8800GPU, DD NB Block on Thermochill PA120.3 Radiator w/ DD 12V Pump
OCZ GameXStream 850W
MountainMods U2-UFO 18" Cube Case
DELL 2405FPW 24" Widescreen LCD
RME-Audio Fireface 800 based audio production
Strange thhough, when i had 3700 EBs i could memtest stable for 250 passes in test #5 but when trying to find stability in winxp, well dont ask....Originally Posted by Lood007
Even at 235Mhz 3-3-2-8/10 1T timings was NO GO!
Would selling the 2x512MB DIMMs of PC3700EB for a 1-gig kit of PC4200EL (with TCCDs) be worth it?
I dont know how much I could get for selling the EB, but the 4200EL is mucho expensive thru newegg.
Does anyone think that this would be a good idea? I have seen some great screenies at 2.8V with FSB of 275-290 MHz.
Anyone have any good experiences with the 4200EL?
Thanks for the help
Lood007
Q6600 G0 at 3.5 GHz 1.30v on DFI P35-T2R
4GB OCZ PC2-9200 Reapers
150GB WD Raptor, 2xWD 120GB RAID-0, 3x320GB HDD
BFG 8800GTS OC at 675/2100
Danger Den Based Water Cooling: TDX-775, 8800GPU, DD NB Block on Thermochill PA120.3 Radiator w/ DD 12V Pump
OCZ GameXStream 850W
MountainMods U2-UFO 18" Cube Case
DELL 2405FPW 24" Widescreen LCD
RME-Audio Fireface 800 based audio production
i had
2x 512MB OCZ PC3700EB DC kit - one stick did 250mhz, one did 255mhz
2x 512MB OCZ PC3700EB single sticks non-dual channel - one stick did 260mhz and one does 285mhz
---
Check the 2K1 scores in sig....both were run with OCZ 3700EB. Details in project descriptionOriginally Posted by Lood007
The Winchester fsb is more impressive and far more representive than a screen shot.
Anyone?Originally Posted by Lood007
Q6600 G0 at 3.5 GHz 1.30v on DFI P35-T2R
4GB OCZ PC2-9200 Reapers
150GB WD Raptor, 2xWD 120GB RAID-0, 3x320GB HDD
BFG 8800GTS OC at 675/2100
Danger Den Based Water Cooling: TDX-775, 8800GPU, DD NB Block on Thermochill PA120.3 Radiator w/ DD 12V Pump
OCZ GameXStream 850W
MountainMods U2-UFO 18" Cube Case
DELL 2405FPW 24" Widescreen LCD
RME-Audio Fireface 800 based audio production
Bookmarks