Page 10 of 10 FirstFirst ... 78910
Results 226 to 243 of 243

Thread: New OCZ PC-4200 Platinum @ 550CL 2 , 600 and 630

  1. #226
    XSDCMF
    Join Date
    Nov 2002
    Location
    Las Vegas Nevada
    Posts
    5,473
    This is the code for the 1GB Dual Channel Kit PN - OCZ5331024ELDCPE-K

    Also, looks like ( www.atacom.com ) may have single sticks of this RAM, available. At least that is the way I am reading their listing. They may or may not sell/ship to the UK, though. I don't know.

    But if they sell singles, others resellers may also. Pricey as hell, though. Even more so, than the DC kits. But if someone is/wants to run 512 MB in a single channel board...

    Quote Originally Posted by BAcon
    anyone in the UK have any of this stuff?

    also what is the exact name/spec (timings at stock) suppliers will use to advertise them

    http://www.ocztechnology.com/product...annel_platinum

    this stuff right

  2. #227
    Xtreme Member
    Join Date
    Nov 2004
    Location
    Koh Samui, Thailand
    Posts
    221
    Quote Originally Posted by BAcon
    anyone in the UK have any of this stuff?

    also what is the exact name/spec (timings at stock) suppliers will use to advertise them

    http://www.ocztechnology.com/product...annel_platinum

    this stuff right
    I'm in the UK and I got mine this morning! Been playing around with it all day... Will post my speeds later...
    Intel® Core™ i7-875K @ 4216Mhz For 24/7
    Gigabyte GA-P55-UD6
    2 x 2Gb DDR3 Kingston KHX1600C9D3/2G HyperX
    Thor's Hammer with 2 x 120mm 90CFM Push/Pull
    Asus EAH5970/G/2DIS/2GD5
    5 x WD 500GB RE3 SS'd to 50GB each in RAID-0
    1 x WD 1.5TB RE4 - Storage
    APC Smart-UPS 2200VA
    CoolerMaster Stacker CM690 II Case

    Need Water...

  3. #228
    Xtreme Member
    Join Date
    Nov 2004
    Location
    Koh Samui, Thailand
    Posts
    221
    Quote Originally Posted by cinders
    I'm in the UK and I got mine this morning! Been playing around with it all day... Will post my speeds later...
    Forgot to say I got mine from a UK Stockist - around £260
    Intel® Core™ i7-875K @ 4216Mhz For 24/7
    Gigabyte GA-P55-UD6
    2 x 2Gb DDR3 Kingston KHX1600C9D3/2G HyperX
    Thor's Hammer with 2 x 120mm 90CFM Push/Pull
    Asus EAH5970/G/2DIS/2GD5
    5 x WD 500GB RE3 SS'd to 50GB each in RAID-0
    1 x WD 1.5TB RE4 - Storage
    APC Smart-UPS 2200VA
    CoolerMaster Stacker CM690 II Case

    Need Water...

  4. #229
    Xtreme Enthusiast
    Join Date
    Dec 2003
    Posts
    584
    Quote Originally Posted by cinders
    I'm in the UK and I got mine this morning! Been playing around with it all day... Will post my speeds later...
    Looking forward to it. I sent mine back to get the heatspreaders fixed. In the meantime I swapped out my Neo2 for another and I'm getting much better results with my BH-5. I'm hoping the same will hold true for the OCZ TCCD's, not that they did poorly to begin with.
    .........current project, make the 135i faster

  5. #230
    Xtreme Mentor
    Join Date
    Jun 2002
    Posts
    3,336
    Mikead_99, you may want to change your avitar until things start to improve.
    {2012 27imac-3.4i7-680mx-32gb ram-768SSD+External TB Samsung840pro ssd + TB velociraptors-Moto828mkIII/Marantz/Amphion Sound-HPzR30w 2nd monitor}

  6. #231
    Xtreme Enthusiast
    Join Date
    Dec 2003
    Posts
    584
    Quote Originally Posted by xgman
    Mikead_99, you may want to change your avitar until things start to improve.
    lol, it pains me, but I'm not fair-weather.....hmmm, some DC baseball avi or something might be better then a constant reminder though.
    .........current project, make the 135i faster

  7. #232
    Xtreme Member
    Join Date
    Oct 2004
    Location
    Bregenz/Austria/Europe
    Posts
    115
    What special OCZ rams are you talking about? This "high voltage mystery rams"???
    put your finger in the mouth, laughing crumbs keeps your youth... :banana4:

  8. #233
    Xtreme Enthusiast
    Join Date
    Dec 2003
    Posts
    584
    Quote Originally Posted by burnhead
    What special OCZ rams are you talking about? This "high voltage mystery rams"???
    [http://xtremesystems.org/forums/show...t=high+volt%2A

    edited coz I gave you wrong link
    Last edited by mikead_99; 11-17-2004 at 01:40 PM.
    .........current project, make the 135i faster

  9. #234
    XSDCMF
    Join Date
    Nov 2002
    Location
    Las Vegas Nevada
    Posts
    5,473
    Quote Originally Posted by mikead_99
    Looking forward to it. I sent mine back to get the heatspreaders fixed. In the meantime I swapped out my Neo2 for another and I'm getting much better results with my BH-5. I'm hoping the same will hold true for the OCZ TCCD's, not that they did poorly to begin with.
    Definitely OT, but, which reseller would I have the best chance of getting the latest rev NEO2 from? I understand one does not want the older one...

  10. #235
    X.I.P.
    Join Date
    Jul 2004
    Location
    Hellas-->Athens
    Posts
    1,298
    Sorry...but this memory come out only at dual channel as 2x512 and not at 2x256.....i can;t find in europe 2x256kit.....

  11. #236
    Xtreme Member
    Join Date
    Nov 2004
    Location
    Germany, Munich
    Posts
    201
    are there any low-volt (no booster) and high fsb benches? i would like to run it like geforceti4200 :x

  12. #237
    Registered User
    Join Date
    Nov 2004
    Posts
    85
    It's my first post at this forum and until now I'm loving all the info I can get here and all the things I can learn...
    I would like to know which is the exact comercial designation for this memory ???
    Is it OCZ 4200 EL PLATINUM ???
    Because if this is the correct designation I've seen it rated 266Mhz 2,5-3-3-8 with 2,75v... is all that correct ???
    Thanks for helping me because I'm confused...

  13. #238
    Xtreme Addict
    Join Date
    Nov 2002
    Location
    california or chicago
    Posts
    1,031
    OCZ employee and proud of it.
    If you have actually personaly experienced a problem with a OCZ product that was not solved quickly by our wonderful support staff I would like to know. Feel free to PM
    Thanks

    I am overclocked!

    "Posted on Mar 30, 2005 at 1:35 AM by StormGod
    In soviet Russia memory overvolts you! "

  14. #239
    Xtreme Member
    Join Date
    Nov 2004
    Location
    Germany, Munich
    Posts
    201
    so i got some questions:
    1) does excaliber deliver to germany?
    2) does atacom do?
    3) how much will the shipping + tax and the other stuff be, if you know (usa -> germany) ?
    4) and how long will the shipping be ?
    thanks in advance

  15. #240
    Xtreme Member
    Join Date
    Nov 2004
    Location
    Koh Samui, Thailand
    Posts
    221
    Quote Originally Posted by agor
    so i got some questions:
    1) does excaliber deliver to germany?
    2) does atacom do?
    3) how much will the shipping + tax and the other stuff be, if you know (usa -> germany) ?
    4) and how long will the shipping be ?
    thanks in advance
    I suggest you contact eXcaliber PC yourself and ask them...

    I know they do International delivery as I'm about to order some of the VX memory when it's in stock... (still hittting refresh! - they said it's due today!)
    Intel® Core™ i7-875K @ 4216Mhz For 24/7
    Gigabyte GA-P55-UD6
    2 x 2Gb DDR3 Kingston KHX1600C9D3/2G HyperX
    Thor's Hammer with 2 x 120mm 90CFM Push/Pull
    Asus EAH5970/G/2DIS/2GD5
    5 x WD 500GB RE3 SS'd to 50GB each in RAID-0
    1 x WD 1.5TB RE4 - Storage
    APC Smart-UPS 2200VA
    CoolerMaster Stacker CM690 II Case

    Need Water...

  16. #241
    Registered User
    Join Date
    Nov 2004
    Posts
    85
    Thanks ryanpgroovy
    That's exactly what I was thinking...

  17. #242
    Registered User
    Join Date
    Mar 2004
    Posts
    11
    Hmm.. I've browsed through this thread. And i just can't find a 2-2-2-x test with this memory.. How far do u get on 3.1v on ur DFI single stick... ?
    AvIOn @ Ocshoot.no 3dmark-team
    Mobo: DFI Lanparty UT NF3 250
    CPU: Amd64 3400+ Mobile
    MEM: Ocz 3200 El rev.2 2*512
    GFX: HIS Exalibur x800 pro 12-pipes
    PSU: Enermax 460w 12v@33amp
    Superpi: 33 seconds
    3DMark01: 30574

  18. #243
    Sandoval
    Join Date
    Jun 2004
    Location
    ehn why cee
    Posts
    470

    mixing tccd

    i've got a pair of 2x512 ocz 3200 rev2 and a pair of 2x512 ocz 4200 plat. the 4200's and 1 stick of the 3200s can get up to 280 memtest stable, while the other stick of the 3200s gets to 290. this is all at the same voltages. i was wondering if it's possible to mix the 3200 and 4200. i was also wondering if the tccd benefits from a burn in.

    i7 980x | corsair dominator 6x4 Gb | TJ07
    SLI GTX 580x2 | GT430 | rampage 3 | corsair AX1200
    LSI 9265 | OCZ vertex 128x4 raid0 | corsair c300 | hitachi 3tbx3 |
    blocks: cpu hk 3.0 | gpu aquacomputer 580x2 | mb ek re3 fc | ram bitspower galaxy
    pump: laing d5 x2 | res: koolance 452x2
    rad: TC 120.3 120.2 | scythe GTx5
    NASs: qnap 879 8x3tb | thecus N5200 2tbx5

Page 10 of 10 FirstFirst ... 78910

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •