hi guys, i have searched a lot for these mods, but i haven't found them, all the mods were foro another PCB, different from mine....i have a simple 9500pro sapphire with in-line memory
hi guys, i have searched a lot for these mods, but i haven't found them, all the mods were foro another PCB, different from mine....i have a simple 9500pro sapphire with in-line memory
i have some experience with 9500pro vmods, could u post a detailed picture of your card, and what mem chips it usesOriginally Posted by Malachia
can you see the light? is it shining too bright? can you see the light at the end of the tunnel, i know i do, i know its true.
post some pictures i can help you out
2100@2.55ghz / 2.8c@3.3ghz / 2500M@ 2.7ghz
9500pro(softmod/vmod) 430core 335mem / 9600xt(vmod) 620core 745mem
epox 8rda+ /abit ic7 max3
i will do them, memories are infineon 3.3, they took 330mhz without artifacts, core takes 380 without artifacts, all stock cooling(i have a wb not worry,these were just first prooves...)
EDIT
Last edited by Malachia; 11-06-2004 at 12:45 AM.
k heres the vmods:
can you see the light? is it shining too bright? can you see the light at the end of the tunnel, i know i do, i know its true.
theres another pcb revision that has the same mods except if u do the vref and vddq mods as well, the other one looks like this:
only the mem area in the bottom lef tis different afaik
can you see the light? is it shining too bright? can you see the light at the end of the tunnel, i know i do, i know its true.
thx a lot!!!
now these are my stock voltages
core 1,524
mems 2.84
with watercooling how much volts i can give at core and at mems?
core 2v
mem 3v
at least
can be more
I'm from Germany......my English is not the best
Originally Posted by .::$k4T4N::.
max???like 2v on AMD 32bit....
nvm
can you see the light? is it shining too bright? can you see the light at the end of the tunnel, i know i do, i know its true.
Originally Posted by blinky
i will beat yours 18500 3dmarks man, you know this
wich is the best score for a 9500pro???
best is 18,700 by our own Jeff.Originally Posted by Malachia
i would have broken it but i killed my mobo
can you see the light? is it shining too bright? can you see the light at the end of the tunnel, i know i do, i know its true.
Originally Posted by blinky
well, i do 17300 stock cooling without mods, processor@2250mhz, evry 250mhz ares 1000points, i think that i can broke them!
nice, i had my core at 1.75 anything more and i wouldnt gain any more mhz i got 440mhz max stable out of the core then one day the cooling stoped . i used a 10 vr resistor for the core.
2100@2.55ghz / 2.8c@3.3ghz / 2500M@ 2.7ghz
9500pro(softmod/vmod) 430core 335mem / 9600xt(vmod) 620core 745mem
epox 8rda+ /abit ic7 max3
i got 445 core with vga silencer, but that was with the mem down, my 9500 has power issuesOriginally Posted by mattsmall
what cpu u on malachia? if i was on A64 i would be at 20k already
mebe i could have a little race with ya
can you see the light? is it shining too bright? can you see the light at the end of the tunnel, i know i do, i know its true.
i am on 754....then i will try to do something bettere than 19k
i am whaiting for a clawhammer that do 2500mhz 1,6v rs air cooled....then i must search a wb that can hold 5x5 tecs...
sorry where i can found the list of the points with the 9500pro????on the orb there isn't this vga
i had to search through 25 pages to find this score, the 9500pro's are listed under 9700 non-proOriginally Posted by Malachia
this is the WR afaik: http://service.futuremark.com/compare?2k1=5886672
can you see the light? is it shining too bright? can you see the light at the end of the tunnel, i know i do, i know its true.
i think that i can beat it
http://service.futuremark.com/compare?2k1=8238258
Last edited by Malachia; 11-11-2004 at 08:15 AM.
heres my stock cooling no vmods: and i dont even have an A64:Originally Posted by Malachia
http://service.futuremark.com/compare?2k1=8170147
gotcha beat
im working on a -50c cpu cooler, and possibly another cooler for the GPU, so.... my 9500 will be freezing soon
can you see the light? is it shining too bright? can you see the light at the end of the tunnel, i know i do, i know its true.
malachia:
try win 2k and tweak a little
up to 800 points extra on a64 : http://forums.techpowerup.com/showthread.php?p=6110
I'm from Germany......my English is not the best
thx a lot!!!
@blinky
also i, but i have also a 9800pro then now like now i am workin on a gpu phase change for here, maybe also the 9500pro will get -50
Originally Posted by Malachia
sounds good bro
can you see the light? is it shining too bright? can you see the light at the end of the tunnel, i know i do, i know its true.
Originally Posted by .::$k4T4N::.
not avaible in my SO, don't know why...
malachia, if you get to a point where u cant make the mem go any higher, i can tell you the other two mem vmods.
can you see the light? is it shining too bright? can you see the light at the end of the tunnel, i know i do, i know its true.
Bookmarks