9500pro sapphire PCB volt mods

[Malachia]

hi guys, i have searched a lot for these mods, but i haven't found them, all the mods were foro another PCB, different from mine....i have a simple 9500pro sapphire with in-line memory

[blinky]

hi guys, i have searched a lot for these mods, but i haven't found them, all the mods were foro another PCB, different from mine....i have a simple 9500pro sapphire with in-line memory

i have some experience with 9500pro vmods, could u post a detailed picture of your card, and what mem chips it uses

[mattsmall]

post some pictures i can help you out

[Malachia]

i will do them, memories are infineon 3.3, they took 330mhz without artifacts, core takes 380 without artifacts, all stock cooling(i have a wb not worry,these were just first prooves...)


EDIT

[blinky]

k heres the vmods:

[blinky]

theres another pcb revision that has the same mods except if u do the vref and vddq mods as well, the other one looks like this:


only the mem area in the bottom lef tis different afaik

[Malachia]

thx a lot!!!

now these are my stock voltages


core 1,524
mems 2.84



with watercooling how much volts i can give at core and at mems?

[.::$k4T4N::.]

core 2v
mem 3v

at least
can be more

[Malachia]

core 2v
mem 3v

at least
can be more

max???like 2v on AMD 32bit....

[blinky]

nvm

[Malachia]

nvm

i will beat yours 18500 3dmarks man, you know this
wich is the best score for a 9500pro???

[blinky]

i will beat yours 18500 3dmarks man, you know this
wich is the best score for a 9500pro???

best is 18,700 by our own Jeff.

i would have broken it but i killed my mobo

[Malachia]

best is 18,700 by our own Jeff.

i would have broken it but i killed my mobo

well, i do 17300 stock cooling without mods, processor@2250mhz, evry 250mhz ares 1000points, i think that i can broke them!

[mattsmall]

nice, i had my core at 1.75 anything more and i wouldnt gain any more mhz i got 440mhz max stable out of the core then one day the cooling stoped . i used a 10 vr resistor for the core.

[blinky]

nice, i had my core at 1.75 anything more and i wouldnt gain any more mhz i got 440mhz max stable out of the core then one day the cooling stoped . i used a 10 vr resistor for the core.

i got 445 core with vga silencer, but that was with the mem down, my 9500 has power issues


what cpu u on malachia? if i was on A64 i would be at 20k already

mebe i could have a little race with ya

[Malachia]

i am on 754....then i will try to do something bettere than 19k
i am whaiting for a clawhammer that do 2500mhz 1,6v rs air cooled....then i must search a wb that can hold 5x5 tecs...

[Malachia]

sorry where i can found the list of the points with the 9500pro????on the orb there isn't this vga

[blinky]

sorry where i can found the list of the points with the 9500pro????on the orb there isn't this vga

i had to search through 25 pages to find this score, the 9500pro's are listed under 9700 non-pro

this is the WR afaik: http://service.futuremark.com/compare?2k1=5886672

[Malachia]

i think that i can beat it

http://service.futuremark.com/compare?2k1=8238258

[blinky]

i think that i can beat it

http://service.futuremark.com/compare?2k1=8238258

heres my stock cooling no vmods: and i dont even have an A64:
http://service.futuremark.com/compare?2k1=8170147

gotcha beat


im working on a -50c cpu cooler, and possibly another cooler for the GPU, so.... my 9500 will be freezing soon

[.::$k4T4N::.]

malachia:
try win 2k and tweak a little

up to 800 points extra on a64 : http://forums.techpowerup.com/showthread.php?p=6110

[Malachia]

thx a lot!!!


@blinky

also i, but i have also a 9800pro then now like now i am workin on a gpu phase change for here, maybe also the 9500pro will get -50

[blinky]

thx a lot!!!


@blinky

also i, but i have also a 9800pro then now like now i am workin on a gpu phase change for here, maybe also the 9500pro will get -50

sounds good bro

[Malachia]

malachia:
try win 2k and tweak a little

up to 800 points extra on a64 : http://forums.techpowerup.com/showthread.php?p=6110

not avaible in my SO, don't know why...

[blinky]

malachia, if you get to a point where u cant make the mem go any higher, i can tell you the other two mem vmods.