DFI Lanparty UT 250 + BH-5

**st0nedpenguin** · 11-01-2004, 03:34 AM

Righty, I'm running the rig in my sig, the CPU will run 2.8GHz all day long, but until now I've had to run on dividers to hit the 255MHz HTT speed needed.

So, now it's time to see what I can do on the RAM clock side of things, and here's where I need your help.

I need some people who are running these motherboards with BH-5 to chip in and give me some tips on BIOS settings etc, I've found a few that help me out a lot, and I'm sooo close to hitting 11x255 at 1:1 it's untrue, I'm just lacking that last little bit of stability, which I'm hoping can be achieved through BIOS tweaking.

So, hit me with your tips people, I know it's a longshot, but I'd really like to run this thing in 1:1 with my current RAM, before shelling out a large wad for some TCCD.

**eva2000** · 11-01-2004, 04:51 AM

http://i4memory.com/showthread.php?t=142 majority results with DFI NF3 250Gb + BH-5 ram

Actually haven't tried my OCZ PC3500 Plat LE BH-5 on this board yet.. saving best for last heh

**Holst** · 11-01-2004, 07:28 AM

With my Bh5 I found that timings didnt help much for the OC.
Running 2T will get me above 250mhz, but kills performance.

I might be able to get 255 at higher Vdimm.
I cant get over 3.25v as my 3.3v line is not tweaked.

Take your 3.3v line to 3.6 and try running the ram at 3.4-3.5v and you might hit 255 stable.
Mine will run 251 all day long at 2,2,10,2,1t with 3.25v and it scales very well with vdimm.